GET /api/v1/reports/?format=api&page=2491
HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 124711,
    "next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&page=2492",
    "previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&page=2490",
    "results": [
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99242.5,'status':'heartbeat','temperature':23.609375,'time':1753027768,'voltage':3.8378906}",
            "created_at": "2025-07-21T13:05:06.667606Z",
            "received_by_notehub": "2025-07-21T13:05:06.482000Z",
            "when_captured_by_device": "2025-07-21T12:31:09Z",
            "best_location_when": "2025-07-21T12:25:09Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "23.61",
            "humidity": "100",
            "pressure": "99242.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193896/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8378906"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':31,'usb':true,'voltage':5.265625}",
            "created_at": "2025-07-21T13:11:02.707823Z",
            "received_by_notehub": "2025-07-21T13:11:02.520000Z",
            "when_captured_by_device": "2025-07-21T13:10:38Z",
            "best_location_when": "2025-07-21T13:11:01Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193897/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':24.0625,'time':1752491796,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-07-21T13:14:29.691356Z",
            "received_by_notehub": "2025-07-21T13:14:29.430000Z",
            "when_captured_by_device": "2025-07-21T13:14:16Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "24.06",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193898/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':67.8125,'pressure':100038.27,'status':'heartbeat','temperature':21.828125,'time':1752999981,'voltage':3.7617188}",
            "created_at": "2025-07-21T13:19:42.745357Z",
            "received_by_notehub": "2025-07-21T13:19:42.567000Z",
            "when_captured_by_device": "2025-07-21T13:11:03Z",
            "best_location_when": "2025-07-21T12:59:23Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "21.83",
            "humidity": "67.81",
            "pressure": "100038.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193899/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7617188"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99256.89,'status':'heartbeat','temperature':26.28125,'time':1753025836,'voltage':4.3125}",
            "created_at": "2025-07-21T13:59:05.717667Z",
            "received_by_notehub": "2025-07-21T13:59:05.438000Z",
            "when_captured_by_device": "2025-07-21T13:58:31Z",
            "best_location_when": "2025-07-21T13:45:31Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "26.28",
            "humidity": "100",
            "pressure": "99256.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193900/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3125"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':60.78125,'pressure':101251.56,'status':'heartbeat','temperature':17.5625,'time':1752794159,'voltage':3.765625}",
            "created_at": "2025-07-21T14:02:07.980225Z",
            "received_by_notehub": "2025-07-21T14:02:07.776000Z",
            "when_captured_by_device": "2025-07-21T14:01:19Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "17.56",
            "humidity": "60.78",
            "pressure": "101251.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193901/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.765625"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99267.836,'status':'heartbeat','temperature':25.234375,'time':1753027768,'voltage':3.8613281}",
            "created_at": "2025-07-21T14:05:29.322646Z",
            "received_by_notehub": "2025-07-21T14:05:29.144000Z",
            "when_captured_by_device": "2025-07-21T13:31:53Z",
            "best_location_when": "2025-07-21T13:25:49Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "25.23",
            "humidity": "100",
            "pressure": "99267.8",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193902/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8613281"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':30.6875,'usb':true,'voltage':5.265625}",
            "created_at": "2025-07-21T14:11:11.826031Z",
            "received_by_notehub": "2025-07-21T14:11:11.639000Z",
            "when_captured_by_device": "2025-07-21T14:10:46Z",
            "best_location_when": "2025-07-21T14:11:11Z",
            "best_location_type": "tower",
            "latitude": "19.471359",
            "longitude": "-71.314964",
            "temperature": "30.69",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193903/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':24.0625,'time':1752491796,'usb':true,'voltage':5.2265625}",
            "created_at": "2025-07-21T14:14:38.118611Z",
            "received_by_notehub": "2025-07-21T14:14:37.939000Z",
            "when_captured_by_device": "2025-07-21T14:14:24Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "24.06",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193904/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':74.8125,'jcount':1,'journey':1753106325,'motion':1,'pressure':100056.28,'seconds':93,'status':'no-sat','temperature':20.359375,'time':1752999981,'voltage':3.75}",
            "created_at": "2025-07-21T14:20:04.501395Z",
            "received_by_notehub": "2025-07-21T14:20:04.312000Z",
            "when_captured_by_device": "2025-07-21T14:04:07Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "20.36",
            "humidity": "74.81",
            "pressure": "100056.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193905/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.75"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':76.0625,'pressure':99228.87,'status':'heartbeat','temperature':30.453125,'time':1753025836,'voltage':4.3125}",
            "created_at": "2025-07-21T15:00:41.699770Z",
            "received_by_notehub": "2025-07-21T15:00:41.429000Z",
            "when_captured_by_device": "2025-07-21T15:00:35Z",
            "best_location_when": "2025-07-21T14:46:11Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "30.45",
            "humidity": "76.06",
            "pressure": "99228.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193906/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3125"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':47.0625,'pressure':101291.5,'status':'heartbeat','temperature':22.28125,'time':1752794159,'voltage':3.8496094}",
            "created_at": "2025-07-21T15:04:17.385975Z",
            "received_by_notehub": "2025-07-21T15:04:17.196000Z",
            "when_captured_by_device": "2025-07-21T15:03:27Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "22.28",
            "humidity": "47.06",
            "pressure": "101291.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193907/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8496094"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':79.4375,'pressure':99229.836,'status':'heartbeat','temperature':28.078125,'time':1753027768,'voltage':3.8710938}",
            "created_at": "2025-07-21T15:05:52.132538Z",
            "received_by_notehub": "2025-07-21T15:05:51.943000Z",
            "when_captured_by_device": "2025-07-21T14:32:53Z",
            "best_location_when": "2025-07-21T14:26:33Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "28.08",
            "humidity": "79.44",
            "pressure": "99229.8",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193908/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8710938"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':31.1875,'usb':true,'voltage':5.265625}",
            "created_at": "2025-07-21T15:11:20.806302Z",
            "received_by_notehub": "2025-07-21T15:11:20.564000Z",
            "when_captured_by_device": "2025-07-21T15:10:54Z",
            "best_location_when": "2025-07-21T15:11:20Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.19",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193909/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':24.25,'time':1752491796,'usb':true,'voltage':5.2265625}",
            "created_at": "2025-07-21T15:14:46.024551Z",
            "received_by_notehub": "2025-07-21T15:14:45.832000Z",
            "when_captured_by_device": "2025-07-21T15:14:32Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "24.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193910/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':61.8125,'pressure':100094.92,'status':'heartbeat','temperature':23.90625,'time':1752999981,'voltage':3.7695312}",
            "created_at": "2025-07-21T15:20:25.093109Z",
            "received_by_notehub": "2025-07-21T15:20:24.911000Z",
            "when_captured_by_device": "2025-07-21T15:05:27Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "23.91",
            "humidity": "61.81",
            "pressure": "100094.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193911/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7695312"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':62.71875,'pressure':99224.03,'status':'heartbeat','temperature':32,'time':1753025836,'voltage':4.3125}",
            "created_at": "2025-07-21T16:03:01.844020Z",
            "received_by_notehub": "2025-07-21T16:03:01.642000Z",
            "when_captured_by_device": "2025-07-21T16:02:55Z",
            "best_location_when": "2025-07-21T15:48:15Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "32",
            "humidity": "62.72",
            "pressure": "99224",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193912/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3125"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':62.9375,'pressure':99223.87,'status':'heartbeat','temperature':32.34375,'time':1753027768,'voltage':3.8867188}",
            "created_at": "2025-07-21T16:06:14.239534Z",
            "received_by_notehub": "2025-07-21T16:06:14.049000Z",
            "when_captured_by_device": "2025-07-21T15:35:09Z",
            "best_location_when": "2025-07-21T15:27:25Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "32.34",
            "humidity": "62.94",
            "pressure": "99223.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193913/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8867188"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':37.09375,'pressure':101263.586,'status':'heartbeat','temperature':26.046875,'time':1752794159,'voltage':3.8535156}",
            "created_at": "2025-07-21T16:06:46.073821Z",
            "received_by_notehub": "2025-07-21T16:06:45.894000Z",
            "when_captured_by_device": "2025-07-21T16:05:55Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "26.05",
            "humidity": "37.09",
            "pressure": "101263.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193914/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8535156"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':31.0625,'usb':true,'voltage':5.265625}",
            "created_at": "2025-07-21T16:11:25.641770Z",
            "received_by_notehub": "2025-07-21T16:11:25.305000Z",
            "when_captured_by_device": "2025-07-21T16:10:59Z",
            "best_location_when": "2025-07-21T16:11:24Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.06",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193915/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':24.0625,'time':1752491796,'usb':true,'voltage':5.2265625}",
            "created_at": "2025-07-21T16:14:54.839118Z",
            "received_by_notehub": "2025-07-21T16:14:54.653000Z",
            "when_captured_by_device": "2025-07-21T16:14:40Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "24.06",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193916/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':57.46875,'pressure':100125.76,'status':'heartbeat','temperature':24.21875,'time':1752999981,'voltage':3.765625}",
            "created_at": "2025-07-21T16:20:46.939574Z",
            "received_by_notehub": "2025-07-21T16:20:46.751000Z",
            "when_captured_by_device": "2025-07-21T16:06:23Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "24.22",
            "humidity": "57.47",
            "pressure": "100125.8",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193917/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.765625"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':1,'seconds':90,'status':'no-sat','temperature':31.875,'usb':true,'voltage':5.265625}",
            "created_at": "2025-07-21T16:40:55.368477Z",
            "received_by_notehub": "2025-07-21T16:40:55.197000Z",
            "when_captured_by_device": "2025-07-21T16:40:28Z",
            "best_location_when": "2025-07-21T16:40:54Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.88",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193918/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':55.28125,'pressure':99194,'status':'heartbeat','temperature':33.5625,'time':1753025836,'voltage':4.3125}",
            "created_at": "2025-07-21T17:06:32.514325Z",
            "received_by_notehub": "2025-07-21T17:06:32.249000Z",
            "when_captured_by_device": "2025-07-21T17:05:31Z",
            "best_location_when": "2025-07-21T16:50:31Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "33.56",
            "humidity": "55.28",
            "pressure": "99194",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193919/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3125"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':61.28125,'pressure':99198.5,'status':'heartbeat','temperature':32.65625,'time':1753027768,'voltage':3.8925781}",
            "created_at": "2025-07-21T17:07:34.246067Z",
            "received_by_notehub": "2025-07-21T17:07:34.069000Z",
            "when_captured_by_device": "2025-07-21T16:37:29Z",
            "best_location_when": "2025-07-21T16:29:13Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "32.66",
            "humidity": "61.28",
            "pressure": "99198.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193920/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8925781"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':39.625,'pressure':101285.25,'status':'heartbeat','temperature':25.578125,'time':1752794159,'voltage':3.8574219}",
            "created_at": "2025-07-21T17:10:13.584979Z",
            "received_by_notehub": "2025-07-21T17:10:13.394000Z",
            "when_captured_by_device": "2025-07-21T17:08:19Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "25.58",
            "humidity": "39.62",
            "pressure": "101285.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193921/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8574219"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':1,'seconds':90,'status':'no-sat','temperature':31.875,'usb':true,'voltage':5.1875}",
            "created_at": "2025-07-21T17:11:16.668350Z",
            "received_by_notehub": "2025-07-21T17:11:16.305000Z",
            "when_captured_by_device": "2025-07-21T17:10:38Z",
            "best_location_when": "2025-07-21T17:11:15Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.88",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193922/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.1875"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':24.125,'time':1752491796,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-07-21T17:15:09.268884Z",
            "received_by_notehub": "2025-07-21T17:15:09.006000Z",
            "when_captured_by_device": "2025-07-21T17:14:48Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "24.12",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193923/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':70,'pressure':100171.984,'status':'heartbeat','temperature':21.875,'time':1752999981,'voltage':3.7578125}",
            "created_at": "2025-07-21T17:21:14.650908Z",
            "received_by_notehub": "2025-07-21T17:21:14.450000Z",
            "when_captured_by_device": "2025-07-21T17:07:23Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "21.88",
            "humidity": "70",
            "pressure": "100172",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193924/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7578125"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':58.5,'pressure':99159.03,'status':'heartbeat','temperature':32.75,'time':1753027768,'voltage':3.8886719}",
            "created_at": "2025-07-21T18:07:56.925065Z",
            "received_by_notehub": "2025-07-21T18:07:56.741000Z",
            "when_captured_by_device": "2025-07-21T17:40:00Z",
            "best_location_when": "2025-07-21T17:31:16Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "32.75",
            "humidity": "58.5",
            "pressure": "99159",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193925/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8886719"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':46.375,'pressure':99145.25,'status':'heartbeat','temperature':37.46875,'time':1753025836,'voltage':4.3046875}",
            "created_at": "2025-07-21T18:08:17.606752Z",
            "received_by_notehub": "2025-07-21T18:08:17.395000Z",
            "when_captured_by_device": "2025-07-21T18:07:54Z",
            "best_location_when": "2025-07-21T17:53:18Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "37.47",
            "humidity": "46.38",
            "pressure": "99145.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193926/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.0625,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-07-21T18:11:06.384318Z",
            "received_by_notehub": "2025-07-21T18:11:06.066000Z",
            "when_captured_by_device": "2025-07-21T18:10:39Z",
            "best_location_when": "2025-07-21T18:11:05Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.06",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193927/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':39.3125,'pressure':101297.055,'status':'heartbeat','temperature':25.40625,'time':1752794159,'voltage':3.8515625}",
            "created_at": "2025-07-21T18:11:10.228943Z",
            "received_by_notehub": "2025-07-21T18:11:09.937000Z",
            "when_captured_by_device": "2025-07-21T18:10:35Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "25.41",
            "humidity": "39.31",
            "pressure": "101297.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193928/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8515625"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':23.8125,'time':1752491796,'usb':true,'voltage':5.2265625}",
            "created_at": "2025-07-21T18:15:15.544155Z",
            "received_by_notehub": "2025-07-21T18:15:15.361000Z",
            "when_captured_by_device": "2025-07-21T18:14:55Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "23.81",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193929/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':64.625,'pressure':100272.36,'status':'heartbeat','temperature':20.6875,'time':1752999981,'voltage':3.7558594}",
            "created_at": "2025-07-21T18:21:35.624652Z",
            "received_by_notehub": "2025-07-21T18:21:35.431000Z",
            "when_captured_by_device": "2025-07-21T18:09:00Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "20.69",
            "humidity": "64.62",
            "pressure": "100272.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193930/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7558594"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':45.125,'pressure':99115.34,'status':'heartbeat','temperature':36.5625,'time':1753027768,'voltage':3.9023438}",
            "created_at": "2025-07-21T19:08:19.507298Z",
            "received_by_notehub": "2025-07-21T19:08:19.313000Z",
            "when_captured_by_device": "2025-07-21T18:42:28Z",
            "best_location_when": "2025-07-21T18:39:44Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "36.56",
            "humidity": "45.12",
            "pressure": "99115.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193931/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.9023438"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':48.96875,'pressure':99104.695,'status':'heartbeat','temperature':36.03125,'time':1753025836,'voltage':4.3007812}",
            "created_at": "2025-07-21T19:10:53.965114Z",
            "received_by_notehub": "2025-07-21T19:10:53.786000Z",
            "when_captured_by_device": "2025-07-21T19:10:30Z",
            "best_location_when": "2025-07-21T19:07:26Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "36.03",
            "humidity": "48.97",
            "pressure": "99104.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193932/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3007812"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.375,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-07-21T19:11:06.503512Z",
            "received_by_notehub": "2025-07-21T19:11:06.300000Z",
            "when_captured_by_device": "2025-07-21T19:10:39Z",
            "best_location_when": "2025-07-21T19:11:05Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.38",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193933/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':35.0625,'pressure':101280.29,'status':'heartbeat','temperature':28.765625,'time':1752794159,'voltage':3.8710938}",
            "created_at": "2025-07-21T19:13:38.631641Z",
            "received_by_notehub": "2025-07-21T19:13:38.440000Z",
            "when_captured_by_device": "2025-07-21T19:13:03Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "28.77",
            "humidity": "35.06",
            "pressure": "101280.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193934/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8710938"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':23.875,'time':1752491796,'usb':true,'voltage':5.2265625}",
            "created_at": "2025-07-21T19:15:24.259311Z",
            "received_by_notehub": "2025-07-21T19:15:24.088000Z",
            "when_captured_by_device": "2025-07-21T19:15:03Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "23.88",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193935/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':67.125,'pressure':100357.555,'status':'heartbeat','temperature':20,'time':1752999981,'voltage':3.7558594}",
            "created_at": "2025-07-21T19:21:58.374270Z",
            "received_by_notehub": "2025-07-21T19:21:58.191000Z",
            "when_captured_by_device": "2025-07-21T19:10:12Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "20",
            "humidity": "67.12",
            "pressure": "100357.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193936/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7558594"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':55.21875,'pressure':99103.54,'status':'heartbeat','temperature':32.8125,'time':1753027768,'voltage':3.90625}",
            "created_at": "2025-07-21T20:08:41.774338Z",
            "received_by_notehub": "2025-07-21T20:08:41.589000Z",
            "when_captured_by_device": "2025-07-21T19:43:12Z",
            "best_location_when": "2025-07-21T19:41:00Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "32.81",
            "humidity": "55.22",
            "pressure": "99103.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193937/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.90625"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.5,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-07-21T20:11:04.647902Z",
            "received_by_notehub": "2025-07-21T20:11:04.364000Z",
            "when_captured_by_device": "2025-07-21T20:10:40Z",
            "best_location_when": "2025-07-21T20:11:03Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.5",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193938/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':54,'pressure':99114.664,'status':'heartbeat','temperature':33.9375,'time':1753025836,'voltage':4.296875}",
            "created_at": "2025-07-21T20:11:37.930957Z",
            "received_by_notehub": "2025-07-21T20:11:37.685000Z",
            "when_captured_by_device": "2025-07-21T20:11:14Z",
            "best_location_when": "2025-07-21T20:08:02Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "33.94",
            "humidity": "54",
            "pressure": "99114.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193939/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.296875"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':23.3125,'time':1752491796,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-07-21T20:15:33.884402Z",
            "received_by_notehub": "2025-07-21T20:15:33.707000Z",
            "when_captured_by_device": "2025-07-21T20:15:11Z",
            "best_location_when": "2025-07-14T17:17:24Z",
            "best_location_type": "gps",
            "latitude": "45.4982325",
            "longitude": "-73.69293359",
            "temperature": "23.31",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193940/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':31.609375,'pressure':101271.48,'status':'heartbeat','temperature':29.265625,'time':1752794159,'voltage':3.859375}",
            "created_at": "2025-07-21T20:15:42.998015Z",
            "received_by_notehub": "2025-07-21T20:15:42.793000Z",
            "when_captured_by_device": "2025-07-21T20:15:07Z",
            "best_location_when": "2025-07-19T19:15:50Z",
            "best_location_type": "gps",
            "latitude": "45.4979025",
            "longitude": "-73.69313672",
            "temperature": "29.27",
            "humidity": "31.61",
            "pressure": "101271.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193941/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.859375"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':71.125,'pressure':100463.13,'status':'heartbeat','temperature':18.640625,'time':1752999981,'voltage':3.7441406}",
            "created_at": "2025-07-21T20:22:19.365869Z",
            "received_by_notehub": "2025-07-21T20:22:19.171000Z",
            "when_captured_by_device": "2025-07-21T20:11:24Z",
            "best_location_when": "2025-07-21T13:17:47Z",
            "best_location_type": "gps",
            "latitude": "50.6302675",
            "longitude": "3.08637109",
            "temperature": "18.64",
            "humidity": "71.12",
            "pressure": "100463.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193942/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7441406"
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':54.875,'pressure':99076.414,'status':'heartbeat','temperature':33.21875,'time':1753027768,'voltage':3.9042969}",
            "created_at": "2025-07-21T21:09:04.454850Z",
            "received_by_notehub": "2025-07-21T21:09:04.267000Z",
            "when_captured_by_device": "2025-07-21T20:45:40Z",
            "best_location_when": "2025-07-21T20:41:44Z",
            "best_location_type": "gps",
            "latitude": "39.8582025",
            "longitude": "-86.09666797",
            "temperature": "33.22",
            "humidity": "54.88",
            "pressure": "99076.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193943/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.9042969"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.625,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-07-21T21:11:05.331117Z",
            "received_by_notehub": "2025-07-21T21:11:05.139000Z",
            "when_captured_by_device": "2025-07-21T21:10:40Z",
            "best_location_when": "2025-07-21T21:11:04Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.62",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193944/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':59.5,'pressure':99063.72,'status':'heartbeat','temperature':33.03125,'time':1753025836,'voltage':4.2929688}",
            "created_at": "2025-07-21T21:13:01.670845Z",
            "received_by_notehub": "2025-07-21T21:13:01.482000Z",
            "when_captured_by_device": "2025-07-21T21:12:38Z",
            "best_location_when": "2025-07-21T21:08:42Z",
            "best_location_type": "gps",
            "latitude": "39.8577025",
            "longitude": "-86.09665234",
            "temperature": "33.03",
            "humidity": "59.5",
            "pressure": "99063.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/193945/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2929688"
        }
    ]
}