HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 156368,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=728",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=726",
"results": [
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T20:19:36.000Z, file: _track.qo, where_when: 2024-08-25T20:02:11.000Z, location(gps): 39.8798825,-86.08265234, 29.1C/0%RH, voltage: 4.15",
"created_at": "2024-08-25T20:21:30.039843Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "29.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/141996/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 141996
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-25T20:28:03.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 24.4C/0%RH, voltage: 5.23",
"created_at": "2024-08-25T20:28:16.914850Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/141997/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 141997
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "when: 2024-08-25T20:29:52.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, voltage: 4.17",
"created_at": "2024-08-25T20:31:46.247118Z",
"received_by_notehub": "2024-08-25T20:31:46.034000Z",
"when_captured_by_device": "2024-08-25T20:29:52Z",
"best_location_when": "2024-08-25T20:02:11Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/141998/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 141998
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "when: 2024-08-25T20:29:54.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T20:31:46.394269Z",
"received_by_notehub": "2024-08-25T20:31:46.054000Z",
"when_captured_by_device": "2024-08-25T20:29:54Z",
"best_location_when": "2024-08-25T20:02:11Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/141999/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 141999
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T20:29:55.000Z, file: _track.qo, where_when: 2024-08-25T20:02:11.000Z, location(gps): 39.8798825,-86.08265234, 28.9C/0%RH, voltage: 4.16",
"created_at": "2024-08-25T20:31:46.660712Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "28.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142000/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142000
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power ON {usb-enabled}, voltage: 5",
"created_at": "2024-08-25T20:34:57.890495Z",
"received_by_notehub": "2024-08-25T20:34:57.715000Z",
"when_captured_by_device": "2024-08-25T20:34:34Z",
"best_location_when": "2024-08-25T20:30:45Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142001/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142001
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power ON {usb-enabled}, voltage: 4.96",
"created_at": "2024-08-25T20:34:58.048474Z",
"received_by_notehub": "2024-08-25T20:34:57.728000Z",
"when_captured_by_device": "2024-08-25T20:34:36Z",
"best_location_when": "2024-08-25T20:30:45Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142002/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142002
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T20:34:37.000Z, file: _track.qo, where_when: 2024-08-25T20:30:45.000Z, location(gps): 39.8798825,-86.08265234, 30.4C/0%RH, voltage: 4.99",
"created_at": "2024-08-25T20:34:58.133139Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "30.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142003/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142003
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-25T20:48:24.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 32.4C/0%RH, voltage: 4.09",
"created_at": "2024-08-25T20:48:53.013700Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "32.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142004/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142004
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.299days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-08-25T20:54:41Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-25T20:55:25.014889Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.35",
"humidity": "44.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142005/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142005
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T20:55:39.605073Z",
"received_by_notehub": "2024-08-25T20:55:38.890000Z",
"when_captured_by_device": "2024-08-25T20:54:00Z",
"best_location_when": "2024-08-25T20:30:45Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142006/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142006
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power OFF {usb-disabled}, voltage: 4.14",
"created_at": "2024-08-25T20:55:40.048059Z",
"received_by_notehub": "2024-08-25T20:55:39.313000Z",
"when_captured_by_device": "2024-08-25T20:54:02Z",
"best_location_when": "2024-08-25T20:30:45Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142007/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142007
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T20:54:03.000Z, file: _track.qo, where_when: 2024-08-25T20:30:45.000Z, location(gps): 39.8798825,-86.08265234, 28.9C/0%RH, voltage: 4.16",
"created_at": "2024-08-25T20:55:40.995095Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "28.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142008/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142008
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 409.839days 2023-07-13T00:48:49Z 27C 80F, 57%RH, now: 2024-08-25T20:56:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-25T20:57:38.663981Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "26.85",
"humidity": "57.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142009/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142009
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T21:02:13.000Z, file: _track.qo, where_when: 2024-08-25T21:01:05.000Z, location(gps): 39.8798825,-86.08265234, 28.8C/0%RH, voltage: 4.19",
"created_at": "2024-08-25T21:03:05.090310Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "28.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142010/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142010
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power ON {usb-enabled}, voltage: 5",
"created_at": "2024-08-25T21:12:08.092170Z",
"received_by_notehub": "2024-08-25T21:12:07.912000Z",
"when_captured_by_device": "2024-08-25T21:11:43Z",
"best_location_when": "2024-08-25T21:01:05Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142011/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142011
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power ON {usb-enabled}, voltage: 4.96",
"created_at": "2024-08-25T21:12:08.247779Z",
"received_by_notehub": "2024-08-25T21:12:07.927000Z",
"when_captured_by_device": "2024-08-25T21:11:45Z",
"best_location_when": "2024-08-25T21:01:05Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142012/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142012
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T21:11:46.000Z, file: _track.qo, where_when: 2024-08-25T21:01:05.000Z, location(gps): 39.8798825,-86.08265234, 29.1C/0%RH, voltage: 4.98",
"created_at": "2024-08-25T21:12:08.332163Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "29.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142013/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142013
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-25T21:15:38.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 23.6C/0%RH, voltage: 5.22",
"created_at": "2024-08-25T21:15:51.755453Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "23.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142014/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142014
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T21:17:32.613326Z",
"received_by_notehub": "2024-08-25T21:17:32.115000Z",
"when_captured_by_device": "2024-08-25T21:16:01Z",
"best_location_when": "2024-08-25T21:01:05Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142015/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142015
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "body: USB power OFF {usb-disabled}, voltage: 4.15",
"created_at": "2024-08-25T21:17:33.339609Z",
"received_by_notehub": "2024-08-25T21:17:32.378000Z",
"when_captured_by_device": "2024-08-25T21:16:03Z",
"best_location_when": "2024-08-25T21:01:05Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142016/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142016
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-25T21:16:04.000Z, file: _track.qo, where_when: 2024-08-25T21:01:05.000Z, location(gps): 39.8798825,-86.08265234, 30.7C/0%RH, voltage: 4.18",
"created_at": "2024-08-25T21:17:34.001786Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "30.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142017/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142017
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-25T21:28:11.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 24.1C/0%RH, voltage: 5.23",
"created_at": "2024-08-25T21:28:23.753211Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "24.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142018/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142018
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-25T21:37:45.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 32.7C/0%RH, voltage: 4.09",
"created_at": "2024-08-25T21:38:15.881892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "32.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142019/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142019
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.93",
"created_at": "2024-08-25T21:46:37.648686Z",
"received_by_notehub": "2024-08-25T21:46:37.447000Z",
"when_captured_by_device": "2024-08-25T21:45:45Z",
"best_location_when": "2024-08-25T21:01:05Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142020/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142020
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "when: 2024-08-25T21:45:47.000Z, file: _track.qo, where_when: 2024-08-25T21:01:05.000Z, location(gps): 39.8798825,-86.08265234, 28.9C/0%RH, voltage: 4.93",
"created_at": "2024-08-25T21:46:37.802586Z",
"received_by_notehub": "2024-08-25T21:46:37.741000Z",
"when_captured_by_device": "2024-08-25T21:45:47Z",
"best_location_when": "2024-08-25T21:01:05Z",
"best_location_type": "gps",
"latitude": "39.8798825",
"longitude": "-86.08265234",
"temperature": "28.88",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142021/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142021
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "when: 2024-08-25T21:48:36.000Z, file: _track.qo, where_when: 2024-08-25T21:48:36.000Z, location(gps): 39.8798775,-86.08235547, 28.9C/0%RH, voltage: 5.02",
"created_at": "2024-08-25T21:49:11.580832Z",
"received_by_notehub": "2024-08-25T21:49:11.400000Z",
"when_captured_by_device": "2024-08-25T21:48:36Z",
"best_location_when": "2024-08-25T21:48:36Z",
"best_location_type": "gps",
"latitude": "39.8798775",
"longitude": "-86.08235547",
"temperature": "28.88",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142022/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142022
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.340days 2023-07-12T13:44:32Z 28C 83F, 47%RH, now: 2024-08-25T21:54:47Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-25T21:55:30.025410Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.40",
"humidity": "46.54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142023/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142023
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T21:57:23.683903Z",
"received_by_notehub": "2024-08-25T21:57:23.507000Z",
"when_captured_by_device": "2024-08-25T21:56:26Z",
"best_location_when": "2024-08-25T21:48:36Z",
"best_location_type": "gps",
"latitude": "39.8798775",
"longitude": "-86.08235547",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142024/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142024
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.15",
"created_at": "2024-08-25T21:57:23.830018Z",
"received_by_notehub": "2024-08-25T21:57:23.518000Z",
"when_captured_by_device": "2024-08-25T21:56:28Z",
"best_location_when": "2024-08-25T21:48:36Z",
"best_location_type": "gps",
"latitude": "39.8798775",
"longitude": "-86.08235547",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142025/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142025
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 409.881days 2023-07-13T00:48:49Z 27C 81F, 57%RH, now: 2024-08-25T21:56:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-25T21:57:37.359180Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "27.07",
"humidity": "57.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142026/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142026
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 5.01",
"created_at": "2024-08-25T22:00:54.549884Z",
"received_by_notehub": "2024-08-25T22:00:54.368000Z",
"when_captured_by_device": "2024-08-25T22:00:32Z",
"best_location_when": "2024-08-25T21:48:36Z",
"best_location_type": "gps",
"latitude": "39.8798775",
"longitude": "-86.08235547",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142027/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142027
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.97",
"created_at": "2024-08-25T22:00:54.701149Z",
"received_by_notehub": "2024-08-25T22:00:54.382000Z",
"when_captured_by_device": "2024-08-25T22:00:34Z",
"best_location_when": "2024-08-25T21:48:36Z",
"best_location_type": "gps",
"latitude": "39.8798775",
"longitude": "-86.08235547",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142028/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142028
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.18",
"created_at": "2024-08-25T22:04:07.899711Z",
"received_by_notehub": "2024-08-25T22:04:07.721000Z",
"when_captured_by_device": "2024-08-25T22:02:42Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142029/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142029
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.98",
"created_at": "2024-08-25T22:07:03.960155Z",
"received_by_notehub": "2024-08-25T22:07:03.731000Z",
"when_captured_by_device": "2024-08-25T22:06:42Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142030/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142030
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.98",
"created_at": "2024-08-25T22:07:04.153862Z",
"received_by_notehub": "2024-08-25T22:07:03.752000Z",
"when_captured_by_device": "2024-08-25T22:06:44Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142031/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142031
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.17",
"created_at": "2024-08-25T22:11:23.219917Z",
"received_by_notehub": "2024-08-25T22:11:23.027000Z",
"when_captured_by_device": "2024-08-25T22:10:25Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142032/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142032
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.15",
"created_at": "2024-08-25T22:11:23.374296Z",
"received_by_notehub": "2024-08-25T22:11:23.040000Z",
"when_captured_by_device": "2024-08-25T22:10:27Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142033/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142033
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 5.02",
"created_at": "2024-08-25T22:14:51.651588Z",
"received_by_notehub": "2024-08-25T22:14:51.462000Z",
"when_captured_by_device": "2024-08-25T22:14:30Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142034/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142034
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.98",
"created_at": "2024-08-25T22:14:51.798734Z",
"received_by_notehub": "2024-08-25T22:14:51.473000Z",
"when_captured_by_device": "2024-08-25T22:14:32Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142035/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142035
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "text: null, voltage: 5",
"created_at": "2024-08-25T22:14:51.884684Z",
"received_by_notehub": "2024-08-25T22:14:51.754000Z",
"when_captured_by_device": "2024-08-25T22:14:33Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142036/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142036
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-25T22:15:46.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 23.1C/0%RH, voltage: 5.22",
"created_at": "2024-08-25T22:16:08.542466Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "23.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142037/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142037
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T22:21:35.487461Z",
"received_by_notehub": "2024-08-25T22:21:35.299000Z",
"when_captured_by_device": "2024-08-25T22:20:30Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142038/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142038
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.15",
"created_at": "2024-08-25T22:21:35.638586Z",
"received_by_notehub": "2024-08-25T22:21:35.312000Z",
"when_captured_by_device": "2024-08-25T22:20:32Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142039/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142039
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: usb, voltage: 4.18",
"created_at": "2024-08-25T22:21:35.768931Z",
"received_by_notehub": "2024-08-25T22:21:35.709000Z",
"when_captured_by_device": "2024-08-25T22:20:33Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142040/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142040
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 5.01",
"created_at": "2024-08-25T22:23:10.891622Z",
"received_by_notehub": "2024-08-25T22:23:10.712000Z",
"when_captured_by_device": "2024-08-25T22:22:49Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142041/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142041
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.97",
"created_at": "2024-08-25T22:23:11.049827Z",
"received_by_notehub": "2024-08-25T22:23:10.723000Z",
"when_captured_by_device": "2024-08-25T22:22:51Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142042/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142042
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: null, voltage: 4.99",
"created_at": "2024-08-25T22:23:11.316197Z",
"received_by_notehub": "2024-08-25T22:23:11.269000Z",
"when_captured_by_device": "2024-08-25T22:22:52Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142043/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142043
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.17",
"created_at": "2024-08-25T22:26:29.494607Z",
"received_by_notehub": "2024-08-25T22:26:29.304000Z",
"when_captured_by_device": "2024-08-25T22:25:26Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142044/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142044
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T22:26:29.657388Z",
"received_by_notehub": "2024-08-25T22:26:29.328000Z",
"when_captured_by_device": "2024-08-25T22:25:28Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142045/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142045
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: , voltage: 4.18",
"created_at": "2024-08-25T22:26:29.740611Z",
"received_by_notehub": "2024-08-25T22:26:29.657000Z",
"when_captured_by_device": "2024-08-25T22:25:29Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142046/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142046
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-25T22:27:00.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 32.4C/0%RH, voltage: 4.08",
"created_at": "2024-08-25T22:27:39.082176Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "32.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142047/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142047
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-25T22:28:19.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 24.1C/0%RH, voltage: 5.23",
"created_at": "2024-08-25T22:28:31.166355Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "24.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142048/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142048
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 5.02",
"created_at": "2024-08-25T22:30:29.529340Z",
"received_by_notehub": "2024-08-25T22:30:29.351000Z",
"when_captured_by_device": "2024-08-25T22:30:07Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142049/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142049
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.97",
"created_at": "2024-08-25T22:30:29.671882Z",
"received_by_notehub": "2024-08-25T22:30:29.362000Z",
"when_captured_by_device": "2024-08-25T22:30:09Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142050/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142050
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: boo, voltage: 5",
"created_at": "2024-08-25T22:30:29.758767Z",
"received_by_notehub": "2024-08-25T22:30:29.671000Z",
"when_captured_by_device": "2024-08-25T22:30:10Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142051/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142051
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-25T22:39:50.983705Z",
"received_by_notehub": "2024-08-25T22:39:50.759000Z",
"when_captured_by_device": "2024-08-25T22:38:46Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142052/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142052
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.18",
"created_at": "2024-08-25T22:39:51.135135Z",
"received_by_notehub": "2024-08-25T22:39:50.780000Z",
"when_captured_by_device": "2024-08-25T22:38:48Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142053/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142053
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: usb, usb: false, voltage: 4.18",
"created_at": "2024-08-25T22:39:51.219997Z",
"received_by_notehub": "2024-08-25T22:39:51.145000Z",
"when_captured_by_device": "2024-08-25T22:38:49Z",
"best_location_when": "2024-08-25T22:02:31Z",
"best_location_type": "gps",
"latitude": "39.8800125",
"longitude": "-86.08289453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142054/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142054
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.382days 2023-07-12T13:44:32Z 29C 84F, 49%RH, now: 2024-08-25T22:54:52Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-25T22:55:36.755451Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "29.00",
"humidity": "48.50",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142055/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142055
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 409.922days 2023-07-13T00:48:49Z 27C 81F, 59%RH, now: 2024-08-25T22:56:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-25T22:57:37.803648Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "27.26",
"humidity": "58.60",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142056/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142056
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: unknown, usb: false, voltage: 4.22",
"created_at": "2024-08-25T23:02:52.671858Z",
"received_by_notehub": "2024-08-25T23:02:52.462000Z",
"when_captured_by_device": "2024-08-25T23:01:44Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142057/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142057
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-25T23:15:54.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 23.2C/0%RH, voltage: 5.22",
"created_at": "2024-08-25T23:16:05.065933Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "23.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142058/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142058
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-25T23:16:20.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 31.5C/0%RH, voltage: 4.09",
"created_at": "2024-08-25T23:18:20.585218Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "31.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142059/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142059
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.98",
"created_at": "2024-08-25T23:23:19.487740Z",
"received_by_notehub": "2024-08-25T23:23:18.897000Z",
"when_captured_by_device": "2024-08-25T23:22:51Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142060/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142060
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.97",
"created_at": "2024-08-25T23:23:20.047566Z",
"received_by_notehub": "2024-08-25T23:23:19.217000Z",
"when_captured_by_device": "2024-08-25T23:22:53Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142061/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142061
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: usb, usb: true, voltage: 4.99",
"created_at": "2024-08-25T23:23:20.516635Z",
"received_by_notehub": "2024-08-25T23:23:20.322000Z",
"when_captured_by_device": "2024-08-25T23:22:54Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "29.19",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142062/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142062
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-25T23:28:27.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 24.4C/0%RH, voltage: 5.23",
"created_at": "2024-08-25T23:28:39.181682Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142063/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142063
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: no-sat, usb: true, voltage: 5.08",
"created_at": "2024-08-25T23:48:24.445835Z",
"received_by_notehub": "2024-08-25T23:48:24.266000Z",
"when_captured_by_device": "2024-08-25T23:48:02Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "30",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142064/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142064
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.424days 2023-07-12T13:44:32Z 29C 83F, 45%RH, now: 2024-08-25T23:54:57Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-25T23:55:45.645376Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.53",
"humidity": "44.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142065/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142065
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 409.964days 2023-07-13T00:48:49Z 28C 82F, 59%RH, now: 2024-08-25T23:56:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-25T23:57:40.085631Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "27.50",
"humidity": "59.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142066/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142066
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-26T00:06:04.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 31.7C/0%RH, voltage: 4.08",
"created_at": "2024-08-26T00:06:32.607557Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "31.72",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142067/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142067
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-26T00:08:20.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 34.8C/0%RH, voltage: 4.06",
"created_at": "2024-08-26T00:08:51.694594Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "34.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142068/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142068
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-26T00:16:02.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 23C/0%RH, voltage: 5.22",
"created_at": "2024-08-26T00:16:12.991724Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142069/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142069
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-26T00:28:35.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 24.4C/0%RH, voltage: 5.23",
"created_at": "2024-08-26T00:29:07.396816Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142070/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142070
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: heartbeat, usb: true, voltage: 5.08",
"created_at": "2024-08-26T00:48:29.867182Z",
"received_by_notehub": "2024-08-26T00:48:29.665000Z",
"when_captured_by_device": "2024-08-26T00:48:09Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "29.75",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142071/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142071
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.466days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-08-26T00:55:03Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-26T00:55:47.495415Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.45",
"humidity": "44.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142072/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142072
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 410.006days 2023-07-13T00:48:49Z 28C 82F, 58%RH, now: 2024-08-26T00:56:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-26T00:57:38.452751Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "27.58",
"humidity": "58.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142073/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142073
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-26T00:57:44.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 31.5C/0%RH, voltage: 4.08",
"created_at": "2024-08-26T00:58:24.465785Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "31.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142074/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142074
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.16",
"created_at": "2024-08-26T01:03:39.402834Z",
"received_by_notehub": "2024-08-26T01:03:39.216000Z",
"when_captured_by_device": "2024-08-26T01:01:45Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142075/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142075
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power OFF {usb-disabled}, voltage: 4.14",
"created_at": "2024-08-26T01:03:39.556084Z",
"received_by_notehub": "2024-08-26T01:03:39.228000Z",
"when_captured_by_device": "2024-08-26T01:01:47Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142076/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142076
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: usb, usb: n/a, voltage: 4.16",
"created_at": "2024-08-26T01:03:39.836780Z",
"received_by_notehub": "2024-08-26T01:03:39.788000Z",
"when_captured_by_device": "2024-08-26T01:01:48Z",
"best_location_when": "2024-08-25T23:01:44Z",
"best_location_type": "gps",
"latitude": "39.8800725",
"longitude": "-86.08234766",
"temperature": "30.12",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142077/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142077
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-26T01:16:10.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 23.1C/0%RH, voltage: 5.22",
"created_at": "2024-08-26T01:16:20.834194Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "23.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142078/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142078
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-26T01:28:43.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 23.8C/0%RH, voltage: 5.23",
"created_at": "2024-08-26T01:28:55.415938Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "23.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142079/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142079
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: n/a, usb: n/a, voltage: 4.2",
"created_at": "2024-08-26T01:35:44.557594Z",
"received_by_notehub": "2024-08-26T01:35:44.353000Z",
"when_captured_by_device": "2024-08-26T01:34:34Z",
"best_location_when": "2024-08-26T01:34:34Z",
"best_location_type": "gps",
"latitude": "39.8798675",
"longitude": "-86.08264453",
"temperature": "25.62",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142080/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142080
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.507days 2023-07-12T13:44:32Z 29C 83F, 44%RH, now: 2024-08-26T01:55:08Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-26T01:55:51.135335Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.52",
"humidity": "43.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142081/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142081
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 410.047days 2023-07-13T00:48:49Z 27C 81F, 59%RH, now: 2024-08-26T01:56:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-26T01:57:39.012465Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "27.46",
"humidity": "58.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142082/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142082
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-26T02:16:18.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 23C/0%RH, voltage: 5.22",
"created_at": "2024-08-26T02:16:30.398987Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142083/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142083
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-26T02:28:51.000Z, file: _track.qo, location(gps): 50.6310625,3.08494922, 24.1C/0%RH, voltage: 5.23",
"created_at": "2024-08-26T02:29:02.853287Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310625",
"longitude": "3.08494922",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142084/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142084
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: heartbeat, usb: n/a, voltage: 4.22",
"created_at": "2024-08-26T02:35:33.337647Z",
"received_by_notehub": "2024-08-26T02:35:32.793000Z",
"when_captured_by_device": "2024-08-26T02:34:37Z",
"best_location_when": "2024-08-26T02:32:17Z",
"best_location_type": "gps",
"latitude": "39.8798675",
"longitude": "-86.08264453",
"temperature": "25.06",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142085/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142085
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-26T01:47:08.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 31.2C/0%RH, voltage: 4.08",
"created_at": "2024-08-26T02:37:14.967217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "31.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142086/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142086
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-26T02:36:44.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 31.4C/0%RH, voltage: 4.08",
"created_at": "2024-08-26T02:37:15.167754Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "31.39",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142087/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142087
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-26T02:39:03.000Z, file: _track.qo, location(gps): 19.4742025,-71.34441016, 34.8C/0%RH, voltage: 4.06",
"created_at": "2024-08-26T02:39:39.184616Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742025",
"longitude": "-71.34441016",
"temperature": "34.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142088/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142088
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 410.549days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-08-26T02:55:14Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-26T02:55:58.219084Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.50",
"humidity": "44.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142089/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142089
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 410.089days 2023-07-13T00:48:49Z 27C 81F, 60%RH, now: 2024-08-26T02:56:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-26T02:57:40.173051Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08229828",
"temperature": "27.23",
"humidity": "59.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142090/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142090
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.93",
"created_at": "2024-08-26T03:12:11.574990Z",
"received_by_notehub": "2024-08-26T03:12:11.389000Z",
"when_captured_by_device": "2024-08-26T03:11:36Z",
"best_location_when": "2024-08-26T02:32:17Z",
"best_location_type": "gps",
"latitude": "39.8798675",
"longitude": "-86.08264453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142091/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142091
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_health.qo",
"uptime": "text: USB power ON {usb-enabled}, voltage: 4.88",
"created_at": "2024-08-26T03:12:11.727784Z",
"received_by_notehub": "2024-08-26T03:12:11.400000Z",
"when_captured_by_device": "2024-08-26T03:11:38Z",
"best_location_when": "2024-08-26T02:32:17Z",
"best_location_type": "gps",
"latitude": "39.8798675",
"longitude": "-86.08264453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142092/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142092
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: usb, usb: true, voltage: 4.91",
"created_at": "2024-08-26T03:12:11.813013Z",
"received_by_notehub": "2024-08-26T03:12:11.682000Z",
"when_captured_by_device": "2024-08-26T03:11:39Z",
"best_location_when": "2024-08-26T02:32:17Z",
"best_location_type": "gps",
"latitude": "39.8798675",
"longitude": "-86.08264453",
"temperature": "25.31",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142093/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142093
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "_track.qo",
"uptime": "status: n/a, usb: true, voltage: 4.97",
"created_at": "2024-08-26T03:14:42.897067Z",
"received_by_notehub": "2024-08-26T03:14:42.673000Z",
"when_captured_by_device": "2024-08-26T03:14:08Z",
"best_location_when": "2024-08-26T03:14:08Z",
"best_location_type": "gps",
"latitude": "39.8798975",
"longitude": "-86.08245703",
"temperature": "25.31",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142094/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142094
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-26T03:16:26.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 22.9C/0%RH, voltage: 5.22",
"created_at": "2024-08-26T03:17:19.804795Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "22.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/142095/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 142095
}
]
}