HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 155746,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=671",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=669",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T13:07:33.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.3C/50.6%RH, voltage: 4.2",
"created_at": "2024-07-27T13:57:33.868072Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.28",
"humidity": "50.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136296/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136296
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T13:52:33.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23C/50.2%RH, voltage: 4.21",
"created_at": "2024-07-27T13:57:34.080483Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.98",
"humidity": "50.15",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136297/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136297
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T13:58:02.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 23.2C/55.2%RH, voltage: 5.41",
"created_at": "2024-07-27T13:58:25.122890Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "23.25",
"humidity": "55.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136298/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136298
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T13:59:39.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 30.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T14:00:16.947159Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "30.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136299/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136299
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T14:15:44.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.3C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T14:16:08.952145Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136300/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136300
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T14:40:35.000Z, file: _track.qo, location(gps): 45.4978625,-73.69298828, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T14:40:58.422028Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978625",
"longitude": "-73.69298828",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136301/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136301
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.586days 2023-07-13T00:48:49Z 24C 75F, 56%RH, now: 2024-07-27T14:52:05Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T14:52:41.109548Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "23.65",
"humidity": "55.54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136302/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136302
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.048days 2023-07-12T13:44:32Z 27C 81F, 46%RH, now: 2024-07-27T14:53:54Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T14:54:50.546012Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.46",
"humidity": "45.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136303/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136303
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T14:37:29.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/49.6%RH, voltage: 4.2",
"created_at": "2024-07-27T14:57:34.507298Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.12",
"humidity": "49.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136304/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136304
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T14:58:10.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 23.3C/55.4%RH, voltage: 5.42",
"created_at": "2024-07-27T14:58:32.380307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "23.3",
"humidity": "55.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136305/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136305
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T14:59:39.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 24.9C/0%RH, voltage: 4.24",
"created_at": "2024-07-27T15:00:08.201187Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136306/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136306
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T15:15:48.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.8C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T15:16:11.358457Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136307/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136307
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T15:28:54.000Z, file: _track.qo, location(gps): 45.4981225,-73.69314453, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T15:29:17.010526Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981225",
"longitude": "-73.69314453",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136308/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136308
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.627days 2023-07-13T00:48:49Z 24C 75F, 55%RH, now: 2024-07-27T15:52:05Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T15:52:41.565904Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "23.80",
"humidity": "55.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136309/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136309
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.090days 2023-07-12T13:44:32Z 27C 80F, 50%RH, now: 2024-07-27T15:54:00Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T15:54:51.045446Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.77",
"humidity": "50.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136310/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136310
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T15:22:29.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.2C/49.3%RH, voltage: 4.2",
"created_at": "2024-07-27T15:57:34.539565Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.16",
"humidity": "49.32",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136311/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136311
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T15:58:18.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 23.4C/55.1%RH, voltage: 5.42",
"created_at": "2024-07-27T15:58:39.732537Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "23.39",
"humidity": "55.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136312/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136312
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T15:59:39.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 24.9C/0%RH, voltage: 4.24",
"created_at": "2024-07-27T16:00:05.785107Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136313/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136313
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T16:15:48.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.4C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T16:16:10.987217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136314/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136314
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T16:17:28.000Z, file: _track.qo, location(gps): 45.4979675,-73.69320703, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T16:17:52.723618Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69320703",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136315/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136315
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T16:31:31.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 25.1C/0%RH, voltage: 4.19",
"created_at": "2024-07-27T16:32:03.722499Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136316/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136316
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.669days 2023-07-13T00:48:49Z 24C 75F, 55%RH, now: 2024-07-27T16:52:06Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T16:52:41.006187Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "23.95",
"humidity": "54.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136317/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136317
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.132days 2023-07-12T13:44:32Z 27C 80F, 53%RH, now: 2024-07-27T16:54:05Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T16:54:55.779204Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.57",
"humidity": "52.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136318/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136318
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T16:07:29.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/49.2%RH, voltage: 4.18",
"created_at": "2024-07-27T16:57:35.686263Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.14",
"humidity": "49.2",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136319/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136319
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T16:52:29.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.3C/49.4%RH, voltage: 4.2",
"created_at": "2024-07-27T16:57:35.878590Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.27",
"humidity": "49.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136320/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136320
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T16:58:26.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 23.5C/54.9%RH, voltage: 5.42",
"created_at": "2024-07-27T16:58:48.302200Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "23.53",
"humidity": "54.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136321/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136321
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T17:05:46.000Z, file: _track.qo, location(gps): 45.4979675,-73.69326172, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T17:06:07.931928Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69326172",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136322/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136322
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T17:07:13.000Z, file: _track.qo, location(gps): 45.4980475,-73.69326953, 26.8C/0%RH, voltage: 4.08",
"created_at": "2024-07-27T17:07:35.532086Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69326953",
"temperature": "26.77",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136323/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136323
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T17:15:48.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.3C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T17:16:11.154244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136324/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136324
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T17:31:31.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 24.9C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T17:32:07.642930Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136325/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136325
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.711days 2023-07-13T00:48:49Z 24C 75F, 55%RH, now: 2024-07-27T17:52:06Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T17:52:43.487075Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.14",
"humidity": "54.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136326/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136326
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.173days 2023-07-12T13:44:32Z 27C 80F, 52%RH, now: 2024-07-27T17:54:10Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T17:55:02.675079Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.61",
"humidity": "52.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136327/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136327
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T17:55:40.000Z, file: _track.qo, location(gps): 45.4980425,-73.69316797, 24.7C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T17:56:06.441277Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980425",
"longitude": "-73.69316797",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136328/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136328
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T17:37:25.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/49.8%RH, voltage: 4.21",
"created_at": "2024-07-27T17:57:37.005392Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.08",
"humidity": "49.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136329/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136329
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T17:58:34.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 23.7C/54.7%RH, voltage: 5.41",
"created_at": "2024-07-27T17:59:02.064749Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "23.69",
"humidity": "54.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136330/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136330
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T18:15:48.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.4C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T18:16:13.623118Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136331/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136331
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T18:31:31.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 25.1C/0%RH, voltage: 4.24",
"created_at": "2024-07-27T18:32:09.440065Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136332/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136332
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T18:44:03.000Z, file: _track.qo, location(gps): 45.4980975,-73.69326172, 24.4C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T18:44:29.890203Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980975",
"longitude": "-73.69326172",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136333/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136333
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.752days 2023-07-13T00:48:49Z 24C 76F, 54%RH, now: 2024-07-27T18:52:06Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T18:52:48.953537Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.42",
"humidity": "54.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136334/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136334
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.215days 2023-07-12T13:44:32Z 27C 80F, 52%RH, now: 2024-07-27T18:54:15Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T18:55:09.807306Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.62",
"humidity": "52.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136335/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136335
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T18:22:25.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23C/49.7%RH, voltage: 4.21",
"created_at": "2024-07-27T18:57:37.184499Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.01",
"humidity": "49.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136336/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136336
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T18:58:42.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 23.9C/54.4%RH, voltage: 5.42",
"created_at": "2024-07-27T18:59:03.576787Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "23.94",
"humidity": "54.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136337/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136337
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T19:15:52.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T19:16:24.430985Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136338/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136338
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T19:31:31.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 25.1C/0%RH, voltage: 4.24",
"created_at": "2024-07-27T19:32:04.853332Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136339/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136339
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T19:32:19.000Z, file: _track.qo, location(gps): 45.4980675,-73.69339453, 24.4C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T19:32:46.135983Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69339453",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136340/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136340
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.794days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-07-27T19:52:07Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T19:52:47.767377Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.75",
"humidity": "53.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136341/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136341
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.257days 2023-07-12T13:44:32Z 27C 80F, 48%RH, now: 2024-07-27T19:54:21Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T19:55:11.455439Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.68",
"humidity": "47.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136342/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136342
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T19:07:25.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23C/49.6%RH, voltage: 4.18",
"created_at": "2024-07-27T19:57:39.888068Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.99",
"humidity": "49.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136343/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136343
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T19:52:25.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23C/49.5%RH, voltage: 4.21",
"created_at": "2024-07-27T19:57:40.647009Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.95",
"humidity": "49.51",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136344/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136344
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T19:58:50.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.2C/54.2%RH, voltage: 5.42",
"created_at": "2024-07-27T19:59:11.526416Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.17",
"humidity": "54.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136345/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136345
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T20:15:52.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.2C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T20:16:14.701535Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136346/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136346
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T20:20:47.000Z, file: _track.qo, location(gps): 45.4981525,-73.69332422, 24.4C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T20:21:11.822875Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981525",
"longitude": "-73.69332422",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136347/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136347
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T20:31:31.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 25.2C/0%RH, voltage: 4.24",
"created_at": "2024-07-27T20:32:04.441558Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "25.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136348/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136348
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.836days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-07-27T20:52:07Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T20:52:47.533531Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.05",
"humidity": "53.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136349/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136349
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.299days 2023-07-12T13:44:32Z 27C 80F, 49%RH, now: 2024-07-27T20:54:26Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T20:55:16.600145Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.73",
"humidity": "49.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136350/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136350
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T20:37:21.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.9C/49.5%RH, voltage: 4.2",
"created_at": "2024-07-27T20:57:38.125439Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.92",
"humidity": "49.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136351/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136351
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T20:58:58.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.4C/54%RH, voltage: 5.42",
"created_at": "2024-07-27T20:59:19.539124Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.42",
"humidity": "53.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136352/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136352
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T21:09:27.000Z, file: _track.qo, location(gps): 45.4980525,-73.69325391, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T21:09:56.650847Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69325391",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136353/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136353
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T21:15:56.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T21:16:26.272130Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136354/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136354
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T21:31:31.000Z, file: _track.qo, location(gps): 50.6308975,3.08498828, 24.6C/0%RH, voltage: 4.24",
"created_at": "2024-07-27T21:32:04.521729Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6308975",
"longitude": "3.08498828",
"temperature": "24.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136355/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136355
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.877days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-07-27T21:52:07Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T21:52:46.603775Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.27",
"humidity": "53.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136356/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136356
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.340days 2023-07-12T13:44:32Z 28C 82F, 50%RH, now: 2024-07-27T21:54:31Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T21:55:21.767314Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.88",
"humidity": "50.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136357/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136357
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T21:22:21.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.9C/49.4%RH, voltage: 4.21",
"created_at": "2024-07-27T21:57:37.908552Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.94",
"humidity": "49.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136358/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136358
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T21:58:00.000Z, file: _track.qo, location(gps): 45.4977525,-73.69348047, 24.4C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T21:58:23.146854Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977525",
"longitude": "-73.69348047",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136359/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136359
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T21:59:06.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.6C/53.8%RH, voltage: 5.41",
"created_at": "2024-07-27T21:59:26.723531Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.64",
"humidity": "53.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136360/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136360
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T22:15:56.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.2C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T22:16:21.072284Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136361/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136361
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T22:39:31.000Z, file: _track.qo, location(gps): 50.6309975,3.08519922, 31.9C/0%RH, voltage: 4.18",
"created_at": "2024-07-27T22:40:05.499884Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6309975",
"longitude": "3.08519922",
"temperature": "31.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136362/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136362
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T22:46:14.000Z, file: _track.qo, location(gps): 45.4980025,-73.69331641, 24.4C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T22:46:37.569110Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69331641",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136363/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136363
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.919days 2023-07-13T00:48:49Z 25C 78F, 54%RH, now: 2024-07-27T22:52:08Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T22:52:48.242980Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.42",
"humidity": "53.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136364/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136364
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.382days 2023-07-12T13:44:32Z 27C 81F, 48%RH, now: 2024-07-27T22:54:37Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T22:55:27.229389Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.15",
"humidity": "47.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136365/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136365
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T22:56:46.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 26C/0%RH, voltage: 4.18",
"created_at": "2024-07-27T22:57:20.817469Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "26",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136366/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136366
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T22:07:21.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.8C/49.5%RH, voltage: 4.18",
"created_at": "2024-07-27T22:57:38.362845Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.82",
"humidity": "49.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136367/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136367
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T22:52:21.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.7C/49.5%RH, voltage: 4.21",
"created_at": "2024-07-27T22:57:38.558477Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.67",
"humidity": "49.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136368/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136368
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T22:59:14.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.8C/53.9%RH, voltage: 5.42",
"created_at": "2024-07-27T22:59:35.096029Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.75",
"humidity": "53.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136369/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136369
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T23:34:36.000Z, file: _track.qo, location(gps): 45.4978975,-73.69312891, 24.4C/0%RH, voltage: 4.1",
"created_at": "2024-07-27T23:35:00.785065Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69312891",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136370/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136370
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.961days 2023-07-13T00:48:49Z 25C 78F, 54%RH, now: 2024-07-27T23:52:08Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T23:52:46.856370Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.46",
"humidity": "53.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136371/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136371
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.424days 2023-07-12T13:44:32Z 27C 81F, 54%RH, now: 2024-07-27T23:54:42Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T23:55:35.889692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.00",
"humidity": "53.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136372/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136372
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T23:56:47.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 25.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T23:57:13.439884Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "25.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136373/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136373
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T23:37:17.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.5C/49.5%RH, voltage: 4.2",
"created_at": "2024-07-27T23:57:39.943761Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.53",
"humidity": "49.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136374/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136374
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T23:59:22.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.8C/54%RH, voltage: 5.42",
"created_at": "2024-07-27T23:59:45.099667Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.81",
"humidity": "54.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136375/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136375
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T23:15:56.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 23.9C/0%RH, voltage: 4.2",
"created_at": "2024-07-28T00:16:19.211448Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "23.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136376/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136376
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-28T00:15:56.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 23.5C/0%RH, voltage: 4.2",
"created_at": "2024-07-28T00:16:19.397865Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "23.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136377/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136377
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-28T00:23:14.000Z, file: _track.qo, location(gps): 45.4980175,-73.69326172, 24C/0%RH, voltage: 4.1",
"created_at": "2024-07-28T00:23:37.187888Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980175",
"longitude": "-73.69326172",
"temperature": "24.05",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136378/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136378
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-28T00:27:44.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980175,-73.69326172, voltage: 5.05",
"created_at": "2024-07-28T00:28:00.866815Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980175",
"longitude": "-73.69326172",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136379/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136379
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-28T00:27:46.000Z, file: _track.qo, location(gps): 45.4980175,-73.69326172, 24.8C/0%RH, voltage: 5.1",
"created_at": "2024-07-28T00:28:01.065361Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980175",
"longitude": "-73.69326172",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136380/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136380
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-28T00:27:40.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4981375,-73.69339453, voltage: 5.05",
"created_at": "2024-07-28T00:28:01.677037Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136381/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136381
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-28T00:27:42.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 23.7C/0%RH, voltage: 5.11",
"created_at": "2024-07-28T00:28:01.903000Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "23.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136382/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136382
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-28T00:27:24.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.5046875,-73.69148438, voltage: 5.31",
"created_at": "2024-07-28T00:28:08.366936Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136383/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136383
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-28T00:27:26.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.5046875,-73.69148438, voltage: 5.29",
"created_at": "2024-07-28T00:28:08.553349Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136384/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136384
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-28T00:22:17.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.4C/49.5%RH, voltage: 4.2",
"created_at": "2024-07-28T00:28:08.668436Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.37",
"humidity": "49.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136385/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136385
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-28T00:27:27.000Z, file: _track.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.5C/49.4%RH, voltage: 5.29",
"created_at": "2024-07-28T00:28:09.174111Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.47",
"humidity": "49.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136386/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136386
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-28T00:46:22.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 28.6C/0%RH, voltage: 5.18",
"created_at": "2024-07-28T00:46:45.014214Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "28.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136387/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136387
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 381.002days 2023-07-13T00:48:49Z 25C 78F, 54%RH, now: 2024-07-28T00:52:08Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-28T00:52:46.774710Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.49",
"humidity": "54.05",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136388/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136388
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 381.465days 2023-07-12T13:44:32Z 27C 81F, 46%RH, now: 2024-07-28T00:54:47Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-28T00:55:37.452031Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.36",
"humidity": "45.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136389/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136389
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-28T00:56:47.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 25.2C/0%RH, voltage: 4.23",
"created_at": "2024-07-28T00:57:13.132471Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "25.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136390/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136390
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-28T00:59:30.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.9C/54.2%RH, voltage: 5.42",
"created_at": "2024-07-28T00:59:50.878095Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.88",
"humidity": "54.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136391/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136391
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-28T01:16:22.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 27.6C/0%RH, voltage: 5.2",
"created_at": "2024-07-28T01:16:44.443304Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "27.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136392/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136392
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-28T01:23:22.000Z, file: _track.qo, location(gps): 45.4980175,-73.69326172, 28.8C/0%RH, voltage: 5.24",
"created_at": "2024-07-28T01:23:37.013819Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980175",
"longitude": "-73.69326172",
"temperature": "28.83",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136393/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136393
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-28T01:24:35.000Z, file: _track.qo, location(gps): 45.4978475,-73.69334766, 31.3C/0%RH, voltage: 5.17",
"created_at": "2024-07-28T01:24:57.591382Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978475",
"longitude": "-73.69334766",
"temperature": "31.3",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136394/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136394
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-28T01:07:10.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24C/48.5%RH, voltage: 5.38",
"created_at": "2024-07-28T01:50:04.031755Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.04",
"humidity": "48.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136395/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136395
}
]
}