HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 142154,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=580",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=578",
"results": [
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T01:56:15.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 25C/0%RH, voltage: 5.12",
"created_at": "2024-06-10T01:56:36.039148Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127196/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127196
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T01:55:57.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4938875,-73.69292188, voltage: 5.3",
"created_at": "2024-06-10T01:56:45.092299Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127197/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127197
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T01:55:59.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4938875,-73.69292188, voltage: 5.33",
"created_at": "2024-06-10T01:56:45.404329Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127198/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127198
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T01:15:32.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 24C/51.9%RH, voltage: 4.23",
"created_at": "2024-06-10T01:56:45.896515Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "23.96",
"humidity": "51.86",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127199/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127199
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T01:56:00.000Z, file: _track.qo, where_when: , location(tower): 45.4938875,-73.69292188, 23.9C/51.9%RH, voltage: 5.34",
"created_at": "2024-06-10T01:56:46.580672Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "23.91",
"humidity": "51.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127200/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127200
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T01:58:02.000Z, file: _track.qo, location(gps): 45.4978175,-73.69341797, 30.9C/0%RH, voltage: 5.11",
"created_at": "2024-06-10T01:58:24.640310Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978175",
"longitude": "-73.69341797",
"temperature": "30.86",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127201/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127201
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T02:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 22.1C/0%RH, voltage: 4.04",
"created_at": "2024-06-10T02:05:05.343229Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "22.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127202/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127202
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T02:13:34.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.2C/46.7%RH, voltage: 5.42",
"created_at": "2024-06-10T02:13:42.576408Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.17",
"humidity": "46.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127203/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127203
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.521days 2023-07-12T13:44:32Z 25C 77F, 47%RH, now: 2024-06-10T02:15:25Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T02:16:12.665239Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.84",
"humidity": "47.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127204/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127204
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T02:16:20.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 28.2C/0%RH, voltage: 5.19",
"created_at": "2024-06-10T02:16:43.578809Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "28.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127205/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127205
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.080days 2023-07-13T00:48:49Z 24C 74F, 47%RH, now: 2024-06-10T02:43:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T02:44:41.782848Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "23.57",
"humidity": "47.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127206/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127206
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T02:00:26.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.1C/52.5%RH, voltage: 5.36",
"created_at": "2024-06-10T02:57:32.055630Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.15",
"humidity": "52.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127207/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127207
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T02:45:26.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.8C/50.9%RH, voltage: 5.39",
"created_at": "2024-06-10T02:57:32.260635Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.82",
"humidity": "50.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127208/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127208
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T02:58:09.000Z, file: _track.qo, location(gps): 45.4978175,-73.69341797, 27.4C/0%RH, voltage: 5.26",
"created_at": "2024-06-10T02:58:25.467743Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978175",
"longitude": "-73.69341797",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127209/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127209
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T02:59:26.000Z, file: _track.qo, location(gps): 45.4979475,-73.69330859, 30.1C/0%RH, voltage: 5.17",
"created_at": "2024-06-10T02:59:48.849550Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69330859",
"temperature": "30.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127210/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127210
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T03:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 22.2C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T03:05:05.748020Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "22.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127211/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127211
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T03:13:42.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 22.9C/48.1%RH, voltage: 5.41",
"created_at": "2024-06-10T03:13:50.208168Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "22.89",
"humidity": "48.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127212/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127212
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.563days 2023-07-12T13:44:32Z 25C 76F, 48%RH, now: 2024-06-10T03:15:30Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T03:16:17.861216Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.58",
"humidity": "48.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127213/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127213
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T03:16:27.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 27.2C/0%RH, voltage: 5.2",
"created_at": "2024-06-10T03:16:48.896192Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "27.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127214/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127214
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T03:43:39.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979475,-73.69330859, voltage: 4.21",
"created_at": "2024-06-10T03:43:56.325227Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69330859",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127215/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127215
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T03:43:41.000Z, file: _track.qo, location(gps): 45.4979475,-73.69330859, 27C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T03:43:56.588213Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69330859",
"temperature": "26.97",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127216/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127216
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T03:43:35.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979525,-73.69334766, voltage: 4.19",
"created_at": "2024-06-10T03:44:01.180675Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127217/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127217
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T03:43:37.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 27C/0%RH, voltage: 4.2",
"created_at": "2024-06-10T03:44:01.540923Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127218/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127218
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T03:43:20.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4947625,-73.69164062, voltage: 4.26",
"created_at": "2024-06-10T03:44:20.145543Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127219/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127219
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T03:43:22.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4947625,-73.69164062, voltage: 4.26",
"created_at": "2024-06-10T03:44:20.339358Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127220/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127220
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T03:30:26.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.6C/51%RH, voltage: 5.39",
"created_at": "2024-06-10T03:44:20.436163Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.64",
"humidity": "51.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127221/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127221
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T03:43:23.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.7C/51%RH, voltage: 4.26",
"created_at": "2024-06-10T03:44:21.012166Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.66",
"humidity": "50.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127222/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127222
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.122days 2023-07-13T00:48:49Z 23C 74F, 50%RH, now: 2024-06-10T03:43:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T03:44:44.256295Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "23.33",
"humidity": "49.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127223/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127223
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T03:45:13.000Z, file: _track.qo, location(gps): 45.4979575,-73.69322266, 28.7C/0%RH, voltage: 4.17",
"created_at": "2024-06-10T03:45:36.903015Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69322266",
"temperature": "28.7",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127224/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127224
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T04:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 21.9C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T04:05:11.634982Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "21.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127225/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127225
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T04:13:50.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 22.8C/49.3%RH, voltage: 5.42",
"created_at": "2024-06-10T04:13:58.225992Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "22.78",
"humidity": "49.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127226/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127226
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.605days 2023-07-12T13:44:32Z 25C 76F, 49%RH, now: 2024-06-10T04:15:36Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T04:16:22.984489Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.50",
"humidity": "48.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127227/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127227
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T04:16:27.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 25.3C/0%RH, voltage: 4.23",
"created_at": "2024-06-10T04:16:51.352662Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "25.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127228/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127228
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T04:34:02.000Z, file: _track.qo, location(gps): 45.4980075,-73.69336328, 25.7C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T04:34:25.681523Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69336328",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127229/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127229
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.163days 2023-07-13T00:48:49Z 23C 74F, 50%RH, now: 2024-06-10T04:43:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T04:44:42.387532Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "23.14",
"humidity": "49.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127230/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127230
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T04:15:26.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/51.4%RH, voltage: 4.27",
"created_at": "2024-06-10T04:52:03.813297Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.16",
"humidity": "51.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127231/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127231
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T05:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 21.8C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T05:05:09.719450Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "21.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127232/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127232
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T05:13:58.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 22.6C/49.8%RH, voltage: 5.41",
"created_at": "2024-06-10T05:14:06.478399Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "22.64",
"humidity": "49.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127233/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127233
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.647days 2023-07-12T13:44:32Z 24C 76F, 49%RH, now: 2024-06-10T05:15:41Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T05:16:28.170888Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.45",
"humidity": "49.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127234/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127234
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T05:16:27.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T05:16:50.656612Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127235/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127235
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T05:22:22.000Z, file: _track.qo, location(gps): 45.4980675,-73.69328516, 25.7C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T05:22:45.263012Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69328516",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127236/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127236
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T05:00:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/51.7%RH, voltage: 4.25",
"created_at": "2024-06-10T05:36:56.710975Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.81",
"humidity": "51.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127237/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127237
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.205days 2023-07-13T00:48:49Z 23C 73F, 50%RH, now: 2024-06-10T05:43:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T05:44:43.290366Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "23.02",
"humidity": "50.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127238/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127238
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T05:45:26.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 23.7C/51.8%RH, voltage: 4.25",
"created_at": "2024-06-10T05:57:34.509944Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "23.66",
"humidity": "51.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127239/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127239
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T06:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 21.1C/0%RH, voltage: 4.04",
"created_at": "2024-06-10T06:05:18.150675Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "21.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127240/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127240
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T06:10:28.000Z, file: _track.qo, location(gps): 45.4979725,-73.69321484, 25.3C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T06:10:51.636035Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979725",
"longitude": "-73.69321484",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127241/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127241
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T06:14:06.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 22.5C/50.4%RH, voltage: 5.41",
"created_at": "2024-06-10T06:14:13.697906Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "22.52",
"humidity": "50.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127242/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127242
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.688days 2023-07-12T13:44:32Z 24C 76F, 49%RH, now: 2024-06-10T06:15:46Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T06:16:33.553828Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.40",
"humidity": "49.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127243/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127243
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T06:16:31.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T06:16:54.313495Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127244/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127244
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.247days 2023-07-13T00:48:49Z 23C 73F, 50%RH, now: 2024-06-10T06:43:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T06:44:43.211848Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "22.83",
"humidity": "50.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127245/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127245
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T06:30:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/51.9%RH, voltage: 4.26",
"created_at": "2024-06-10T06:57:33.925255Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.49",
"humidity": "51.87",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127246/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127246
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T06:59:00.000Z, file: _track.qo, location(gps): 45.4979575,-73.69308203, 25C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T06:59:24.078413Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69308203",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127247/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127247
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T07:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 21.1C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T07:05:05.990246Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "21.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127248/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127248
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T07:14:14.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 22.2C/49.8%RH, voltage: 5.41",
"created_at": "2024-06-10T07:14:23.367700Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "22.25",
"humidity": "49.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127249/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127249
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.730days 2023-07-12T13:44:32Z 24C 76F, 50%RH, now: 2024-06-10T07:15:52Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T07:16:38.541936Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.35",
"humidity": "50.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127250/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127250
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T07:16:31.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T07:16:54.167925Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "24.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127251/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127251
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.288days 2023-07-13T00:48:49Z 23C 73F, 50%RH, now: 2024-06-10T07:43:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T07:44:44.643898Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "22.56",
"humidity": "50.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127252/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127252
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T07:47:57.000Z, file: _track.qo, location(gps): 45.4980475,-73.69344922, 25C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T07:48:20.216613Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69344922",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127253/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127253
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T07:15:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/51.9%RH, voltage: 4.27",
"created_at": "2024-06-10T07:57:35.640104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.39",
"humidity": "51.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127254/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127254
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T08:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 21C/0%RH, voltage: 4.04",
"created_at": "2024-06-10T08:05:14.772752Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "21",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127255/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127255
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T08:14:22.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 22C/50.1%RH, voltage: 5.42",
"created_at": "2024-06-10T08:14:29.777391Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "22.02",
"humidity": "50.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127256/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127256
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.772days 2023-07-12T13:44:32Z 24C 76F, 50%RH, now: 2024-06-10T08:15:57Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T08:16:48.767241Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.29",
"humidity": "49.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127257/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127257
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T08:16:31.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T08:16:55.030430Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127258/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127258
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T08:36:15.000Z, file: _track.qo, location(gps): 45.4979175,-73.69312109, 24.7C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T08:36:38.906326Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69312109",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127259/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127259
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T08:37:26.000Z, file: _track.qo, location(gps): 45.4978975,-73.69335547, 26.8C/0%RH, voltage: 4.18",
"created_at": "2024-06-10T08:37:49.664487Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69335547",
"temperature": "26.77",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127260/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127260
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.330days 2023-07-13T00:48:49Z 22C 72F, 50%RH, now: 2024-06-10T08:43:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T08:44:45.954587Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "22.26",
"humidity": "50.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127261/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127261
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T08:00:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.3C/52%RH, voltage: 4.26",
"created_at": "2024-06-10T08:57:36.315275Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.28",
"humidity": "52.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127262/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127262
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T08:45:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.2C/52%RH, voltage: 4.26",
"created_at": "2024-06-10T08:57:36.508816Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.16",
"humidity": "52.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127263/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127263
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T09:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 20.9C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T09:05:08.789155Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "20.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127264/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127264
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T09:14:30.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 21.7C/50.8%RH, voltage: 5.42",
"created_at": "2024-06-10T09:14:37.738488Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "21.7",
"humidity": "50.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127265/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127265
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.814days 2023-07-12T13:44:32Z 24C 76F, 49%RH, now: 2024-06-10T09:16:02Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T09:16:49.078219Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.47",
"humidity": "48.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127266/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127266
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T09:16:31.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 24.2C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T09:16:55.470428Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127267/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127267
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T09:26:04.000Z, file: _track.qo, location(gps): 45.4979875,-73.69330859, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-06-10T09:26:27.896798Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69330859",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127268/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127268
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.372days 2023-07-13T00:48:49Z 22C 72F, 51%RH, now: 2024-06-10T09:43:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T09:44:44.852357Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "21.98",
"humidity": "51.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127269/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127269
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T09:30:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/52.2%RH, voltage: 4.26",
"created_at": "2024-06-10T09:57:35.406804Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.03",
"humidity": "52.2",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127270/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127270
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T10:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 20.7C/0%RH, voltage: 4.04",
"created_at": "2024-06-10T10:05:06.373503Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127271/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127271
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T10:14:38.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 21.5C/51.8%RH, voltage: 5.41",
"created_at": "2024-06-10T10:14:45.871005Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "21.55",
"humidity": "51.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127272/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127272
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T10:14:43.000Z, file: _track.qo, location(gps): 45.4980625,-73.69326953, 24.8C/0%RH, voltage: 4.21",
"created_at": "2024-06-10T10:15:06.986980Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69326953",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127273/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127273
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T10:16:31.000Z, file: _track.qo, location(gps): 45.4979525,-73.69334766, 24.4C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T10:16:54.213455Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69334766",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127274/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127274
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.855days 2023-07-12T13:44:32Z 24C 76F, 49%RH, now: 2024-06-10T10:16:08Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T10:16:54.239726Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.17",
"humidity": "49.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127275/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127275
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.413days 2023-07-13T00:48:49Z 22C 71F, 52%RH, now: 2024-06-10T10:43:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T10:44:47.642417Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "21.75",
"humidity": "52.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127276/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127276
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T10:46:13.000Z, file: _track.qo, location(gps): 45.4980325,-73.69327734, 24.1C/0%RH, voltage: 4.2",
"created_at": "2024-06-10T10:46:50.547856Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69327734",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127277/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127277
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T10:15:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/52.2%RH, voltage: 4.27",
"created_at": "2024-06-10T10:57:37.288655Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.98",
"humidity": "52.2",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127278/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127278
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T11:03:33.000Z, file: _track.qo, location(gps): 45.4979625,-73.69323047, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-06-10T11:03:56.374291Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979625",
"longitude": "-73.69323047",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127279/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127279
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T11:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 20.5C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T11:05:06.721736Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "20.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127280/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127280
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T11:14:46.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 21.3C/53.8%RH, voltage: 5.41",
"created_at": "2024-06-10T11:14:53.247879Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "21.34",
"humidity": "53.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127281/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127281
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.897days 2023-07-12T13:44:32Z 24C 75F, 50%RH, now: 2024-06-10T11:16:13Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T11:16:59.612738Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.03",
"humidity": "50.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127282/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127282
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.455days 2023-07-13T00:48:49Z 22C 71F, 54%RH, now: 2024-06-10T11:44:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T11:44:48.615543Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08239746",
"temperature": "21.64",
"humidity": "53.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127283/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127283
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T11:46:15.000Z, file: _track.qo, location(gps): 45.4980325,-73.69327734, 24C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T11:46:38.202374Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69327734",
"temperature": "24",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127284/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127284
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T11:51:48.000Z, file: _track.qo, location(gps): 45.4980775,-73.69322266, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-06-10T11:52:13.283811Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980775",
"longitude": "-73.69322266",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127285/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127285
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T11:00:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/52.3%RH, voltage: 4.25",
"created_at": "2024-06-10T11:57:37.876574Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.03",
"humidity": "52.3",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127286/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127286
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T11:45:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/52.2%RH, voltage: 4.26",
"created_at": "2024-06-10T11:57:38.082085Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.02",
"humidity": "52.23",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127287/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127287
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-10T12:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 20.3C/0%RH, voltage: 4.03",
"created_at": "2024-06-10T12:05:05.252352Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127288/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127288
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T12:14:54.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 21.2C/52.9%RH, voltage: 5.41",
"created_at": "2024-06-10T12:15:00.857971Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "21.23",
"humidity": "52.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127289/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127289
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 333.939days 2023-07-12T13:44:32Z 24C 75F, 52%RH, now: 2024-06-10T12:16:18Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-10T12:17:04.609339Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "23.99",
"humidity": "51.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127290/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127290
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-10T12:39:55.000Z, file: _track.qo, location(gps): 45.4980525,-73.69326953, 25C/0%RH, voltage: 4.2",
"created_at": "2024-06-10T12:40:18.595001Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69326953",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127291/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127291
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-10T12:41:00.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 21.2C/52.8%RH, voltage: 5.41",
"created_at": "2024-06-10T12:41:07.104774Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "21.23",
"humidity": "52.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127292/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127292
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 333.497days 2023-07-13T00:48:49Z 22C 71F, 53%RH, now: 2024-06-10T12:44:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-10T12:44:47.372592Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87977600",
"longitude": "-86.08158112",
"temperature": "21.54",
"humidity": "52.51",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127293/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127293
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-10T12:46:19.000Z, file: _track.qo, location(gps): 45.4980325,-73.69327734, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-06-10T12:46:45.056754Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69327734",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127294/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127294
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-10T12:30:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/51.5%RH, voltage: 4.25",
"created_at": "2024-06-10T12:57:39.066037Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.49",
"humidity": "51.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/127295/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 127295
}
]
}