HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 141979,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=544",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=542",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T23:43:47.000Z, file: _temp.qo, where_when: , location(tower): 45.4941625,-73.68964062, 23.1C/50.8%RH, voltage: 4.25",
"created_at": "2024-05-22T23:58:25.705980Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941625",
"longitude": "-73.68964062",
"temperature": "23.1",
"humidity": "50.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123595/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123595
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T23:53:35.000Z, file: _track.qo, where_when: , location(tower): 45.4941625,-73.68964062, 23.1C/50.8%RH, voltage: 5.35",
"created_at": "2024-05-22T23:58:26.976172Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941625",
"longitude": "-73.68964062",
"temperature": "23.09",
"humidity": "50.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123596/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123596
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T23:53:40.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4982075,-73.69328516, voltage: 5.11",
"created_at": "2024-05-22T23:58:30.608177Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982075",
"longitude": "-73.69328516",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123597/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123597
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T23:53:42.000Z, file: _track.qo, location(gps): 45.4982075,-73.69328516, 24.8C/0%RH, voltage: 5.17",
"created_at": "2024-05-22T23:58:31.213078Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982075",
"longitude": "-73.69328516",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123598/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123598
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T23:59:44.000Z, file: _track.qo, location(gps): 45.4980325,-73.69331641, 32.3C/0%RH, voltage: 5.15",
"created_at": "2024-05-23T00:00:10.210466Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69331641",
"temperature": "32.28",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123599/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123599
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T00:16:23.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 26.4C/0%RH, voltage: 5.21",
"created_at": "2024-05-23T00:16:48.049182Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "26.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123600/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123600
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T00:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.8C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T00:34:12.716376Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123601/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123601
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.454days 2023-07-12T13:44:32Z 21C 70F, 65%RH, now: 2024-05-23T00:37:54Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T00:38:46.852051Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "20.85",
"humidity": "64.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123602/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123602
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T00:39:29.000Z, file: _track.qo, where_when: 2024-05-22T23:39:21.000Z, location(gps): 39.8799925,-86.08255859, 25.1C/53%RH, voltage: 5.43",
"created_at": "2024-05-23T00:39:49.628085Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "25.08",
"humidity": "53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123603/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123603
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.995days 2023-07-13T00:48:49Z 25C 78F, 53%RH, now: 2024-05-23T00:41:04Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T00:41:40.452453Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08254242",
"temperature": "25.37",
"humidity": "52.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123604/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123604
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T00:46:18.000Z, file: _track.qo, location(tower): 45.5054375,-73.67992188, 26C/0%RH, voltage: 5.21",
"created_at": "2024-05-23T00:46:44.317396Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5054375",
"longitude": "-73.67992188",
"temperature": "26",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123605/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123605
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T00:28:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4941625,-73.68964062, 23.7C/50%RH, voltage: 5.39",
"created_at": "2024-05-23T00:57:18.674225Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941625",
"longitude": "-73.68964062",
"temperature": "23.69",
"humidity": "50.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123606/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123606
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T00:59:51.000Z, file: _track.qo, location(gps): 45.4980325,-73.69331641, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-23T01:00:11.518120Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69331641",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123607/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123607
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T01:01:42.000Z, file: _track.qo, location(gps): 45.4982725,-73.69335547, 30C/0%RH, voltage: 5.18",
"created_at": "2024-05-23T01:02:08.128181Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982725",
"longitude": "-73.69335547",
"temperature": "30",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123608/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123608
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T01:09:09.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 24.9C/54.1%RH, voltage: 5.42",
"created_at": "2024-05-23T01:09:30.371004Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.91",
"humidity": "54.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123609/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123609
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T01:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.6C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T01:34:11.361739Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123610/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123610
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.495days 2023-07-12T13:44:32Z 22C 72F, 62%RH, now: 2024-05-23T01:38:00Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T01:38:54.625141Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "22.19",
"humidity": "61.86",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123611/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123611
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T01:39:12.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 25.1C/56.4%RH, voltage: 5.42",
"created_at": "2024-05-23T01:39:32.848714Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "25.11",
"humidity": "56.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123612/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123612
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.036days 2023-07-13T00:48:49Z 25C 78F, 56%RH, now: 2024-05-23T01:41:04Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T01:41:40.547022Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "25.33",
"humidity": "56.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123613/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123613
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T01:46:25.000Z, file: _track.qo, location(tower): 45.4941875,-73.67526562, 26.3C/0%RH, voltage: 5.21",
"created_at": "2024-05-23T01:46:47.389253Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941875",
"longitude": "-73.67526562",
"temperature": "26.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123614/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123614
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T01:13:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/49.5%RH, voltage: 5.39",
"created_at": "2024-05-23T01:57:17.236144Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.82",
"humidity": "49.52",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123615/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123615
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T02:01:51.000Z, file: _track.qo, location(gps): 45.4982725,-73.69335547, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-23T02:02:11.055337Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982725",
"longitude": "-73.69335547",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123616/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123616
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T02:03:40.000Z, file: _track.qo, location(gps): 45.4979175,-73.69312891, 30C/0%RH, voltage: 5.18",
"created_at": "2024-05-23T02:04:05.829278Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69312891",
"temperature": "30",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123617/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123617
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T02:06:01.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979175,-73.69312891, voltage: 4.21",
"created_at": "2024-05-23T02:06:23.279774Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69312891",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123618/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123618
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T02:06:03.000Z, file: _track.qo, location(gps): 45.4979175,-73.69312891, 27.3C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T02:06:23.662305Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69312891",
"temperature": "27.3",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123619/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123619
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T02:05:57.000Z, why: USB power OFF {usb-disabled}, location(tower): 45.4923375,-73.68004688, voltage: 4.19",
"created_at": "2024-05-23T02:06:34.996344Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123620/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123620
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T02:05:59.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 25.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-23T02:06:35.394789Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "25.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123621/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123621
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T02:05:55.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4984625,-73.70301562, voltage: 4.26",
"created_at": "2024-05-23T02:06:42.392584Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123622/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123622
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T02:05:57.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4984625,-73.70301562, voltage: 4.26",
"created_at": "2024-05-23T02:06:42.608334Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123623/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123623
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T01:58:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.8C/49.4%RH, voltage: 5.39",
"created_at": "2024-05-23T02:06:42.702726Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.77",
"humidity": "49.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123624/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123624
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T02:05:58.000Z, file: _track.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.7C/49.6%RH, voltage: 4.26",
"created_at": "2024-05-23T02:06:43.494311Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.72",
"humidity": "49.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123625/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123625
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T02:07:59.000Z, file: _track.qo, location(gps): 45.4979775,-73.69336328, 29.2C/0%RH, voltage: 4.17",
"created_at": "2024-05-23T02:08:27.433551Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979775",
"longitude": "-73.69336328",
"temperature": "29.16",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123626/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123626
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T02:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.7C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T02:34:11.530282Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123627/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123627
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.537days 2023-07-12T13:44:32Z 22C 72F, 65%RH, now: 2024-05-23T02:38:05Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T02:38:58.020458Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.96",
"humidity": "64.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123628/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123628
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T02:39:21.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 25C/56.5%RH, voltage: 5.42",
"created_at": "2024-05-23T02:39:41.191318Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "25",
"humidity": "56.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123629/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123629
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.078days 2023-07-13T00:48:49Z 25C 77F, 56%RH, now: 2024-05-23T02:41:05Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T02:41:41.467806Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "25.19",
"humidity": "55.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123630/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123630
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T02:46:25.000Z, file: _track.qo, location(tower): 45.4941875,-73.67526562, 24.7C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T02:47:07.216450Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941875",
"longitude": "-73.67526562",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123631/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123631
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T02:56:41.000Z, file: _track.qo, location(gps): 45.4979975,-73.69333203, 25C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T02:57:06.142658Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69333203",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123632/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123632
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T02:43:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.4C/51%RH, voltage: 4.26",
"created_at": "2024-05-23T02:57:20.477524Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.43",
"humidity": "51.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123633/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123633
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T03:09:12.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 24.8C/55.5%RH, voltage: 5.42",
"created_at": "2024-05-23T03:09:31.678404Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.77",
"humidity": "55.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123634/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123634
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T03:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.3C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T03:34:11.964514Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123636/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123636
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.579days 2023-07-12T13:44:32Z 22C 71F, 65%RH, now: 2024-05-23T03:38:10Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T03:39:02.156675Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.78",
"humidity": "65.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123637/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123637
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.120days 2023-07-13T00:48:49Z 25C 77F, 55%RH, now: 2024-05-23T03:41:05Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T03:41:41.679624Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "24.96",
"humidity": "54.76",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123638/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123638
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T03:45:34.000Z, file: _track.qo, location(gps): 45.4979775,-73.69323047, 25.3C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T03:46:02.067081Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979775",
"longitude": "-73.69323047",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123639/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123639
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T03:46:25.000Z, file: _track.qo, location(tower): 45.4868875,-73.65351562, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T03:47:42.369150Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4868875",
"longitude": "-73.65351562",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123640/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123640
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T03:28:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.6C/52.1%RH, voltage: 4.26",
"created_at": "2024-05-23T03:57:19.202078Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.63",
"humidity": "52.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123641/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123641
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T04:09:21.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 24.4C/55.5%RH, voltage: 5.42",
"created_at": "2024-05-23T04:09:41.334758Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.42",
"humidity": "55.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123642/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123642
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T04:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.2C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T04:34:11.874346Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123643/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123643
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T04:34:11.000Z, file: _track.qo, location(gps): 45.4979675,-73.69313672, 25.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T04:34:35.893414Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69313672",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123644/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123644
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.621days 2023-07-12T13:44:32Z 22C 71F, 66%RH, now: 2024-05-23T04:38:16Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T04:39:07.636348Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.80",
"humidity": "65.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123645/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123645
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.161days 2023-07-13T00:48:49Z 25C 76F, 55%RH, now: 2024-05-23T04:41:05Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T04:41:44.084201Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "24.64",
"humidity": "55.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123646/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123646
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T04:46:25.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 25.5C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T04:47:06.741468Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "25.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123647/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123647
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T04:13:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/52.6%RH, voltage: 4.27",
"created_at": "2024-05-23T04:57:19.722334Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.77",
"humidity": "52.61",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123648/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123648
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T05:09:29.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 24.1C/55.9%RH, voltage: 5.42",
"created_at": "2024-05-23T05:09:49.153757Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.08",
"humidity": "55.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123649/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123649
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T05:23:06.000Z, file: _track.qo, location(gps): 45.4980675,-73.69333984, 25.7C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T05:23:33.636138Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69333984",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123650/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123650
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T05:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.9C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T05:34:12.150217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123651/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123651
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.662days 2023-07-12T13:44:32Z 22C 71F, 65%RH, now: 2024-05-23T05:38:21Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T05:39:12.659098Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.85",
"humidity": "65.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123652/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123652
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.203days 2023-07-13T00:48:49Z 24C 76F, 55%RH, now: 2024-05-23T05:41:06Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T05:41:43.110583Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "24.28",
"humidity": "55.37",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123653/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123653
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T05:46:25.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 25.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T05:47:07.014252Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "25.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123654/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123654
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T04:58:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/53.1%RH, voltage: 4.26",
"created_at": "2024-05-23T05:57:21.123433Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.91",
"humidity": "53.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123655/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123655
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T05:43:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24C/53.3%RH, voltage: 4.26",
"created_at": "2024-05-23T05:57:21.319786Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.03",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123656/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123656
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T06:09:37.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 23.8C/56.8%RH, voltage: 5.42",
"created_at": "2024-05-23T06:09:59.342244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "23.78",
"humidity": "56.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123657/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123657
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T06:11:21.000Z, file: _track.qo, location(gps): 45.4979775,-73.69348047, 25.7C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T06:11:48.742762Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979775",
"longitude": "-73.69348047",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123658/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123658
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T06:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.1C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T06:34:12.179861Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123659/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123659
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.704days 2023-07-12T13:44:32Z 22C 71F, 65%RH, now: 2024-05-23T06:38:26Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T06:39:17.690924Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.87",
"humidity": "65.00",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123660/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123660
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.245days 2023-07-13T00:48:49Z 24C 75F, 56%RH, now: 2024-05-23T06:41:06Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T06:41:41.734344Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "23.98",
"humidity": "56.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123661/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123661
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T06:46:25.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 25.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T06:47:05.792216Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "25.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123662/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123662
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T06:28:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.1C/53.5%RH, voltage: 4.26",
"created_at": "2024-05-23T06:57:21.054998Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.13",
"humidity": "53.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123663/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123663
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T06:59:42.000Z, file: _track.qo, location(gps): 45.4978425,-73.69323047, 25.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T07:00:09.619460Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978425",
"longitude": "-73.69323047",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123664/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123664
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T07:09:45.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 23.5C/58.2%RH, voltage: 5.42",
"created_at": "2024-05-23T07:10:07.611832Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "23.5",
"humidity": "58.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123665/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123665
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T07:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.8C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T07:34:11.896539Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123666/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123666
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.746days 2023-07-12T13:44:32Z 22C 71F, 65%RH, now: 2024-05-23T07:38:32Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T07:39:22.999433Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.89",
"humidity": "64.71",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123667/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123667
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.286days 2023-07-13T00:48:49Z 24C 75F, 57%RH, now: 2024-05-23T07:41:06Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T07:41:45.416781Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "23.68",
"humidity": "57.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123668/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123668
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T07:46:25.000Z, file: _track.qo, location(tower): 45.4941875,-73.67526562, 25.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T07:47:05.409919Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941875",
"longitude": "-73.67526562",
"temperature": "25.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123669/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123669
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T07:48:05.000Z, file: _track.qo, location(gps): 45.4980625,-73.69330859, 25.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-23T07:48:30.355160Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69330859",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123670/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123670
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T07:13:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/53.7%RH, voltage: 4.27",
"created_at": "2024-05-23T07:57:21.349251Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.24",
"humidity": "53.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123671/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123671
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T08:09:53.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 23.1C/58.3%RH, voltage: 5.42",
"created_at": "2024-05-23T08:10:12.906854Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "23.09",
"humidity": "58.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123672/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123672
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T08:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.9C/0%RH, voltage: 4.15",
"created_at": "2024-05-23T08:34:15.391899Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123673/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123673
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T08:36:37.000Z, file: _track.qo, location(gps): 45.4979575,-73.69329297, 25.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-23T08:37:07.697445Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69329297",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123674/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123674
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T08:37:57.000Z, file: _track.qo, location(gps): 45.4978225,-73.69327734, 28.7C/0%RH, voltage: 4.19",
"created_at": "2024-05-23T08:38:23.422436Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978225",
"longitude": "-73.69327734",
"temperature": "28.7",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123675/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123675
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.788days 2023-07-12T13:44:32Z 23C 73F, 62%RH, now: 2024-05-23T08:38:37Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T08:39:28.046339Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "22.80",
"humidity": "61.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123676/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123676
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.328days 2023-07-13T00:48:49Z 23C 74F, 57%RH, now: 2024-05-23T08:41:07Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T08:41:43.608821Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "23.23",
"humidity": "57.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123677/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123677
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T08:46:25.000Z, file: _track.qo, location(tower): 45.4941875,-73.67526562, 25.5C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T08:47:11.062885Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941875",
"longitude": "-73.67526562",
"temperature": "25.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123678/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123678
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T07:58:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.3C/53.9%RH, voltage: 4.26",
"created_at": "2024-05-23T08:57:24.127895Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.27",
"humidity": "53.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123679/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123679
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T08:43:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.3C/54.1%RH, voltage: 4.26",
"created_at": "2024-05-23T08:57:24.320606Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.29",
"humidity": "54.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123680/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123680
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T09:10:01.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 22.9C/58.4%RH, voltage: 5.42",
"created_at": "2024-05-23T09:10:21.311428Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "22.86",
"humidity": "58.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123681/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123681
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T09:26:31.000Z, file: _track.qo, location(gps): 45.4980275,-73.69328516, 26C/0%RH, voltage: 4.2",
"created_at": "2024-05-23T09:26:58.658446Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980275",
"longitude": "-73.69328516",
"temperature": "25.98",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123682/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123682
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T09:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.9C/0%RH, voltage: 4.14",
"created_at": "2024-05-23T09:34:12.496274Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123683/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123683
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.829days 2023-07-12T13:44:32Z 22C 72F, 63%RH, now: 2024-05-23T09:38:42Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T09:39:33.368074Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "22.19",
"humidity": "63.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123684/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123684
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.370days 2023-07-13T00:48:49Z 23C 73F, 58%RH, now: 2024-05-23T09:41:07Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T09:41:44.333592Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "23.01",
"humidity": "57.71",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123685/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123685
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T09:46:25.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 25.5C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T09:47:06.743675Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "25.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123686/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123686
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T09:28:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.3C/54.2%RH, voltage: 4.26",
"created_at": "2024-05-23T09:57:23.917468Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.32",
"humidity": "54.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123687/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123687
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-23T10:10:09.000Z, file: _track.qo, where_when: 2024-05-23T00:39:29.000Z, location(gps): 39.8799925,-86.08255859, 22.6C/58.5%RH, voltage: 5.41",
"created_at": "2024-05-23T10:10:28.718362Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "22.61",
"humidity": "58.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123688/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123688
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T10:15:06.000Z, file: _track.qo, location(gps): 45.4979575,-73.69328516, 25.5C/0%RH, voltage: 4.2",
"created_at": "2024-05-23T10:15:31.247412Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69328516",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123689/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123689
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-23T10:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.9C/0%RH, voltage: 4.14",
"created_at": "2024-05-23T10:34:11.220302Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123690/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123690
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.871days 2023-07-12T13:44:32Z 22C 71F, 64%RH, now: 2024-05-23T10:38:48Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-23T10:39:38.492686Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.91",
"humidity": "63.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123691/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123691
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 315.411days 2023-07-13T00:48:49Z 23C 73F, 57%RH, now: 2024-05-23T10:41:07Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-23T10:41:43.310262Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08250427",
"temperature": "22.77",
"humidity": "57.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123692/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123692
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-23T10:46:25.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 24.7C/0%RH, voltage: 4.25",
"created_at": "2024-05-23T10:47:04.289164Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123693/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123693
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-23T10:13:36.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.9C/53.7%RH, voltage: 4.27",
"created_at": "2024-05-23T10:57:22.363617Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.85",
"humidity": "53.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123694/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123694
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-23T11:03:32.000Z, file: _track.qo, location(gps): 45.4980275,-73.69329297, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-23T11:04:00.107408Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980275",
"longitude": "-73.69329297",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123695/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123695
}
]
}