HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 141793,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=498",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=496",
"results": [
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.700days 2023-07-13T00:48:49Z 21C 71F, 55%RH, now: 2024-04-30T17:37:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T17:37:55.526013Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "21.46",
"humidity": "54.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118804/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118804
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T17:39:19.000Z, file: _track.qo, where_when: 2024-04-30T03:55:27.000Z, location(gps): 39.8795375,-86.08266016, 21C/57.6%RH, voltage: 5.41",
"created_at": "2024-04-30T17:39:43.864639Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8795375",
"longitude": "-86.08266016",
"temperature": "20.97",
"humidity": "57.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118805/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118805
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.172days 2023-07-12T13:44:32Z 20C 69F, 60%RH, now: 2024-04-30T17:51:43Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T17:52:37.579812Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.43",
"humidity": "60.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118806/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118806
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T17:40:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.5C/48.8%RH, voltage: 4.25",
"created_at": "2024-04-30T17:57:21.788618Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.46",
"humidity": "48.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118808/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118808
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T18:04:41.000Z, file: _track.qo, location(gps): 45.4978625,-73.69326172, 20.3C/0%RH, voltage: 4.17",
"created_at": "2024-04-30T18:05:04.614442Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978625",
"longitude": "-73.69326172",
"temperature": "20.28",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118809/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118809
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-30T18:12:27.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.2C/0%RH, voltage: 5.23",
"created_at": "2024-04-30T18:12:57.909107Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118810/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118810
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T18:15:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 19.3C/0%RH, voltage: 4.23",
"created_at": "2024-04-30T18:16:02.756986Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "19.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118811/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118811
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.742days 2023-07-13T00:48:49Z 22C 71F, 54%RH, now: 2024-04-30T18:37:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T18:37:57.291295Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88002014",
"longitude": "-86.08252716",
"temperature": "21.77",
"humidity": "53.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118812/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118812
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T18:39:27.000Z, file: _track.qo, where_when: 2024-04-30T03:55:27.000Z, location(gps): 39.8795375,-86.08266016, 21.3C/56.8%RH, voltage: 5.42",
"created_at": "2024-04-30T18:39:48.894462Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8795375",
"longitude": "-86.08266016",
"temperature": "21.27",
"humidity": "56.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118813/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118813
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.213days 2023-07-12T13:44:32Z 20C 69F, 60%RH, now: 2024-04-30T18:51:48Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T18:52:42.786493Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.41",
"humidity": "59.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118814/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118814
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T18:53:09.000Z, file: _track.qo, location(gps): 45.4978225,-73.69335547, 20C/0%RH, voltage: 4.17",
"created_at": "2024-04-30T18:53:31.454461Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978225",
"longitude": "-73.69335547",
"temperature": "19.95",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118815/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118815
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T18:25:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.4C/48.6%RH, voltage: 4.24",
"created_at": "2024-04-30T18:57:22.313572Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.44",
"humidity": "48.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118817/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118817
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T19:09:10.000Z, file: _track.qo, where_when: 2024-04-30T03:55:27.000Z, location(gps): 39.8795375,-86.08266016, 21.5C/55.7%RH, voltage: 5.41",
"created_at": "2024-04-30T19:09:31.483954Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8795375",
"longitude": "-86.08266016",
"temperature": "21.5",
"humidity": "55.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118818/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118818
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-30T19:12:35.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.2C/0%RH, voltage: 5.23",
"created_at": "2024-04-30T19:12:55.393860Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118819/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118819
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T19:15:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 19C/0%RH, voltage: 4.23",
"created_at": "2024-04-30T19:16:04.152867Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118820/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118820
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.784days 2023-07-13T00:48:49Z 22C 72F, 53%RH, now: 2024-04-30T19:37:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T19:37:57.263019Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08258057",
"temperature": "22.18",
"humidity": "52.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118821/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118821
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T19:39:38.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 21.7C/55.3%RH, voltage: 5.35",
"created_at": "2024-04-30T19:40:13.925162Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "21.72",
"humidity": "55.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118822/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118822
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T19:41:34.000Z, file: _track.qo, location(gps): 45.4979125,-73.69328516, 20C/0%RH, voltage: 4.18",
"created_at": "2024-04-30T19:41:56.416480Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979125",
"longitude": "-73.69328516",
"temperature": "19.95",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118823/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118823
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.255days 2023-07-12T13:44:32Z 20C 69F, 60%RH, now: 2024-04-30T19:51:54Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T19:52:47.771253Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.46",
"humidity": "59.58",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118824/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118824
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T19:10:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.5C/48.2%RH, voltage: 4.24",
"created_at": "2024-04-30T19:57:21.801416Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.53",
"humidity": "48.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118826/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118826
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T19:55:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.6C/47.8%RH, voltage: 4.25",
"created_at": "2024-04-30T19:57:22.006318Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.63",
"humidity": "47.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118827/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118827
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T20:09:10.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22C/55.1%RH, voltage: 5.41",
"created_at": "2024-04-30T20:09:33.939960Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22",
"humidity": "55.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118828/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118828
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-30T20:12:43.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.8C/0%RH, voltage: 5.23",
"created_at": "2024-04-30T20:13:03.547802Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118829/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118829
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T20:15:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 18.9C/0%RH, voltage: 4.23",
"created_at": "2024-04-30T20:16:02.996952Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118830/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118830
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T20:29:59.000Z, file: _track.qo, location(gps): 45.4979725,-73.69315234, 20C/0%RH, voltage: 4.17",
"created_at": "2024-04-30T20:30:21.555533Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979725",
"longitude": "-73.69315234",
"temperature": "19.95",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118831/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118831
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.825days 2023-07-13T00:48:49Z 23C 73F, 52%RH, now: 2024-04-30T20:37:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T20:37:59.550824Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87991333",
"longitude": "-86.08217621",
"temperature": "22.52",
"humidity": "52.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118832/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118832
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T20:47:03.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22.1C/54.4%RH, voltage: 5.41",
"created_at": "2024-04-30T20:47:27.211454Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.08",
"humidity": "54.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118833/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118833
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.297days 2023-07-12T13:44:32Z 21C 70F, 58%RH, now: 2024-04-30T20:51:59Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T20:52:52.827036Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.28",
"humidity": "57.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118834/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118834
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T20:40:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.7C/47.6%RH, voltage: 4.25",
"created_at": "2024-04-30T20:57:22.730833Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.7",
"humidity": "47.6",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118836/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118836
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T21:09:10.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22.3C/54%RH, voltage: 5.41",
"created_at": "2024-04-30T21:09:33.018591Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.31",
"humidity": "54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118837/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118837
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-30T21:12:51.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.4C/0%RH, voltage: 5.23",
"created_at": "2024-04-30T21:13:21.764330Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118838/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118838
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T21:15:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 19.1C/0%RH, voltage: 4.23",
"created_at": "2024-04-30T21:16:02.883227Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "19.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118839/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118839
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T21:18:29.000Z, file: _track.qo, location(gps): 45.4980375,-73.69326953, 20.2C/0%RH, voltage: 4.17",
"created_at": "2024-04-30T21:18:50.539893Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69326953",
"temperature": "20.16",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118840/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118840
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.867days 2023-07-13T00:48:49Z 23C 73F, 51%RH, now: 2024-04-30T21:37:23Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T21:38:07.130728Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08233643",
"temperature": "22.98",
"humidity": "51.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118841/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118841
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.339days 2023-07-12T13:44:32Z 21C 70F, 58%RH, now: 2024-04-30T21:52:04Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T21:52:57.481976Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.97",
"humidity": "58.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118842/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118842
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T21:25:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.8C/47.4%RH, voltage: 4.24",
"created_at": "2024-04-30T21:57:24.039364Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.76",
"humidity": "47.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118844/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118844
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T22:06:49.000Z, file: _track.qo, location(gps): 45.4980225,-73.69337109, 20.1C/0%RH, voltage: 4.17",
"created_at": "2024-04-30T22:07:20.989534Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980225",
"longitude": "-73.69337109",
"temperature": "20.08",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118845/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118845
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T22:09:19.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22.7C/53.3%RH, voltage: 5.41",
"created_at": "2024-04-30T22:09:40.719502Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.69",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118846/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118846
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-30T22:12:59.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.1C/0%RH, voltage: 5.23",
"created_at": "2024-04-30T22:13:26.526553Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118847/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118847
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T22:15:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 19C/0%RH, voltage: 4.23",
"created_at": "2024-04-30T22:16:05.252252Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118848/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118848
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.909days 2023-07-13T00:48:49Z 23C 74F, 52%RH, now: 2024-04-30T22:37:23Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T22:37:57.964944Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87988663",
"longitude": "-86.08234406",
"temperature": "23.16",
"humidity": "51.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118849/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118849
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.380days 2023-07-12T13:44:32Z 21C 69F, 59%RH, now: 2024-04-30T22:52:10Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T22:53:02.782299Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.72",
"humidity": "59.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118850/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118850
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T22:55:30.000Z, file: _track.qo, location(gps): 45.4977975,-73.69341016, 20.2C/0%RH, voltage: 4.17",
"created_at": "2024-04-30T22:55:52.354569Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977975",
"longitude": "-73.69341016",
"temperature": "20.16",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118851/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118851
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T22:10:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.8C/47.5%RH, voltage: 4.24",
"created_at": "2024-04-30T22:57:23.838478Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.77",
"humidity": "47.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118852/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118852
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T22:55:44.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.7C/47.8%RH, voltage: 4.24",
"created_at": "2024-04-30T22:57:24.067880Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.75",
"humidity": "47.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118853/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118853
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-30T23:09:27.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22.5C/53.6%RH, voltage: 5.42",
"created_at": "2024-04-30T23:09:48.459822Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.55",
"humidity": "53.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118854/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118854
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-30T23:13:07.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.2C/0%RH, voltage: 5.23",
"created_at": "2024-04-30T23:13:27.305672Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118855/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118855
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T23:15:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 19C/0%RH, voltage: 4.23",
"created_at": "2024-04-30T23:16:04.556457Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118856/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118856
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T23:30:16.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979825,-73.69328516, voltage: 5.13",
"created_at": "2024-04-30T23:30:35.843491Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118857/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118857
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-30T23:30:18.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 19C/0%RH, voltage: 5.13",
"created_at": "2024-04-30T23:30:36.073429Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118858/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118858
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T23:30:22.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4977975,-73.69341016, voltage: 5.09",
"created_at": "2024-04-30T23:30:37.727558Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977975",
"longitude": "-73.69341016",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118859/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118859
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T23:30:24.000Z, file: _track.qo, location(gps): 45.4977975,-73.69341016, 20.3C/0%RH, voltage: 5.13",
"created_at": "2024-04-30T23:30:37.941124Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977975",
"longitude": "-73.69341016",
"temperature": "20.28",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118860/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118860
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T23:30:14.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-04-30T23:30:43.832850Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118861/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118861
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T23:30:16.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.33",
"created_at": "2024-04-30T23:30:44.081165Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118862/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118862
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T23:30:17.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 18.8C/48%RH, voltage: 5.34",
"created_at": "2024-04-30T23:30:44.187915Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "18.78",
"humidity": "48.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118863/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118863
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-30T23:31:57.000Z, file: _track.qo, location(gps): 45.4981275,-73.69316797, 24.6C/0%RH, voltage: 5.12",
"created_at": "2024-04-30T23:32:17.949399Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981275",
"longitude": "-73.69316797",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118864/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118864
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.950days 2023-07-13T00:48:49Z 23C 73F, 52%RH, now: 2024-04-30T23:37:23Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-30T23:37:57.491332Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08245850",
"temperature": "22.94",
"humidity": "52.05",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118865/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118865
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.422days 2023-07-12T13:44:32Z 21C 69F, 59%RH, now: 2024-04-30T23:52:15Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-30T23:53:08.649163Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.69",
"humidity": "59.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118866/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118866
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-30T23:40:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.1C/48.7%RH, voltage: 5.37",
"created_at": "2024-04-30T23:57:17.255058Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.09",
"humidity": "48.71",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118868/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118868
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-01T00:09:35.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22.4C/53.8%RH, voltage: 5.42",
"created_at": "2024-05-01T00:09:56.757846Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.39",
"humidity": "53.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118869/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118869
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-01T00:13:15.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.1C/0%RH, voltage: 5.23",
"created_at": "2024-05-01T00:13:36.300493Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118870/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118870
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T00:15:39.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 20.4C/0%RH, voltage: 5.2",
"created_at": "2024-05-01T00:15:58.422645Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "20.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118871/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118871
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T00:32:04.000Z, file: _track.qo, location(gps): 45.4981275,-73.69316797, 21.6C/0%RH, voltage: 5.25",
"created_at": "2024-05-01T00:32:19.479495Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981275",
"longitude": "-73.69316797",
"temperature": "21.58",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118872/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118872
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T00:33:21.000Z, file: _track.qo, location(gps): 45.4980525,-73.69336328, 24.6C/0%RH, voltage: 5.17",
"created_at": "2024-05-01T00:33:41.589673Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69336328",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118873/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118873
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 292.992days 2023-07-13T00:48:49Z 23C 73F, 52%RH, now: 2024-05-01T00:37:24Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-01T00:37:58.590735Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08245850",
"temperature": "22.73",
"humidity": "52.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118874/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118874
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.464days 2023-07-12T13:44:32Z 21C 69F, 59%RH, now: 2024-05-01T00:52:20Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-01T00:53:13.781598Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.70",
"humidity": "59.23",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118875/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118875
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T00:25:36.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.1C/48.2%RH, voltage: 5.38",
"created_at": "2024-05-01T00:57:16.798674Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.1",
"humidity": "48.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118877/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118877
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-01T01:09:43.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22.2C/54.5%RH, voltage: 5.41",
"created_at": "2024-05-01T01:10:04.764661Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.2",
"humidity": "54.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118878/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118878
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-01T01:13:23.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-01T01:13:44.361808Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118879/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118879
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T01:15:47.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 20.4C/0%RH, voltage: 5.2",
"created_at": "2024-05-01T01:16:06.166546Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "20.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118880/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118880
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T01:33:28.000Z, file: _track.qo, location(gps): 45.4980525,-73.69336328, 21.7C/0%RH, voltage: 5.25",
"created_at": "2024-05-01T01:33:45.594649Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69336328",
"temperature": "21.7",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118881/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118881
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T01:34:40.000Z, file: _track.qo, location(gps): 45.4980775,-73.69290234, 24.5C/0%RH, voltage: 5.18",
"created_at": "2024-05-01T01:34:59.753297Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980775",
"longitude": "-73.69290234",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118882/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118882
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 293.034days 2023-07-13T00:48:49Z 23C 73F, 53%RH, now: 2024-05-01T01:37:24Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-01T01:38:02.327396Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08243561",
"temperature": "22.57",
"humidity": "52.90",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118883/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118883
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T01:46:22.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 20.7C/0%RH, voltage: 5.2",
"created_at": "2024-05-01T01:46:41.113218Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118884/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118884
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.505days 2023-07-12T13:44:32Z 21C 69F, 59%RH, now: 2024-05-01T01:52:26Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-01T01:53:19.340427Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.70",
"humidity": "59.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118885/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118885
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T01:10:36.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.1C/48.1%RH, voltage: 5.38",
"created_at": "2024-05-01T01:57:17.405022Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.05",
"humidity": "48.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118887/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118887
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T01:55:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.3C/47.7%RH, voltage: 5.37",
"created_at": "2024-05-01T01:57:17.606515Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.34",
"humidity": "47.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118888/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118888
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-01T02:09:51.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 22C/54.7%RH, voltage: 5.42",
"created_at": "2024-05-01T02:10:11.889867Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "22.03",
"humidity": "54.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118889/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118889
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T02:34:48.000Z, file: _track.qo, location(gps): 45.4980775,-73.69290234, 22.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-01T02:35:03.364659Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980775",
"longitude": "-73.69290234",
"temperature": "22.16",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118890/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118890
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T02:36:09.000Z, file: _track.qo, location(gps): 45.4979475,-73.69319141, 24.9C/0%RH, voltage: 5.17",
"created_at": "2024-05-01T02:36:28.902786Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69319141",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118891/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118891
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T02:37:17.000Z, file: _track.qo, location(gps): 45.4979825,-73.69326172, 25.6C/0%RH, voltage: 5.17",
"created_at": "2024-05-01T02:37:37.818563Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69326172",
"temperature": "25.59",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118892/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118892
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 293.075days 2023-07-13T00:48:49Z 22C 72F, 53%RH, now: 2024-05-01T02:37:24Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-01T02:37:59.867099Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08243561",
"temperature": "22.44",
"humidity": "52.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118893/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118893
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T02:46:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.1C/0%RH, voltage: 5.2",
"created_at": "2024-05-01T02:46:50.452662Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118894/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118894
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 293.547days 2023-07-12T13:44:32Z 21C 69F, 59%RH, now: 2024-05-01T02:52:31Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-01T02:53:24.682690Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.70",
"humidity": "59.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118895/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118895
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T02:40:36.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.2C/47.8%RH, voltage: 5.38",
"created_at": "2024-05-01T02:57:18.565660Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.23",
"humidity": "47.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118897/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118897
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-01T03:09:59.000Z, file: _track.qo, where_when: 2024-04-30T19:39:37.000Z, location(gps): 39.8799075,-86.08248047, 21.8C/55.2%RH, voltage: 5.41",
"created_at": "2024-05-01T03:10:19.770030Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799075",
"longitude": "-86.08248047",
"temperature": "21.84",
"humidity": "55.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118898/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118898
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-01T02:13:31.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.1C/0%RH, voltage: 5.22",
"created_at": "2024-05-01T03:13:59.339281Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118899/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118899
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-01T03:13:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.6C/0%RH, voltage: 5.23",
"created_at": "2024-05-01T03:13:59.574258Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118900/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118900
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T03:37:24.000Z, file: _track.qo, location(gps): 45.4979825,-73.69326172, 22.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-01T03:37:38.967343Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69326172",
"temperature": "22.22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118901/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118901
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 293.117days 2023-07-13T00:48:49Z 22C 72F, 53%RH, now: 2024-05-01T03:37:25Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-01T03:37:59.823348Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08243561",
"temperature": "22.21",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118902/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118902
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T03:39:08.000Z, file: _track.qo, location(gps): 45.4978925,-73.69333984, 25.3C/0%RH, voltage: 5.17",
"created_at": "2024-05-01T03:39:28.787699Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69333984",
"temperature": "25.27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118903/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118903
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T03:45:10.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4978925,-73.69333984, voltage: 4.2",
"created_at": "2024-05-01T03:45:27.289271Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69333984",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118904/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118904
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-01T03:45:12.000Z, file: _track.qo, location(gps): 45.4978925,-73.69333984, 22.4C/0%RH, voltage: 4.21",
"created_at": "2024-05-01T03:45:27.527527Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69333984",
"temperature": "22.42",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118905/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118905
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T03:45:06.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979825,-73.69328516, voltage: 4.19",
"created_at": "2024-05-01T03:45:42.101298Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118906/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118906
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T03:45:08.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-01T03:45:42.467647Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118907/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118907
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T03:45:02.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4947625,-73.69164062, voltage: 4.26",
"created_at": "2024-05-01T03:45:51.330777Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118908/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118908
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T03:45:04.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4947625,-73.69164062, voltage: 4.25",
"created_at": "2024-05-01T03:45:51.555190Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118909/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118909
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T03:25:37.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.4C/47.4%RH, voltage: 5.39",
"created_at": "2024-05-01T03:45:51.647134Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.39",
"humidity": "47.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118910/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118910
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-01T03:45:05.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 19.3C/47.3%RH, voltage: 4.25",
"created_at": "2024-05-01T03:45:51.957580Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "19.33",
"humidity": "47.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118911/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118911
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-01T03:46:31.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-01T03:47:09.879726Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118912/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118912
}
]
}