GET /api/v1/reports/?format=api&ordering=id&page=2339
HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 117089,
    "next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=2340",
    "previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=2338",
    "results": [
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':82.5625,'pressure':98765.055,'status':'heartbeat','temperature':16.28125,'time':1748618174,'voltage':3.8886719}",
            "created_at": "2025-05-31T16:39:59.339182Z",
            "received_by_notehub": "2025-05-31T16:39:59.129000Z",
            "when_captured_by_device": "2025-05-31T16:19:52Z",
            "best_location_when": "2025-05-30T20:22:54Z",
            "best_location_type": "gps",
            "latitude": "45.4978925",
            "longitude": "-73.69340234",
            "temperature": "16.28",
            "humidity": "82.56",
            "pressure": "98765.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186296/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8886719"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':1,'seconds':90,'status':'no-sat','temperature':31.4375,'usb':true,'voltage':5.265625}",
            "created_at": "2025-05-31T16:41:00.113007Z",
            "received_by_notehub": "2025-05-31T16:40:59.815000Z",
            "when_captured_by_device": "2025-05-31T16:40:33Z",
            "best_location_when": "2025-05-31T16:40:59Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.44",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186297/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':44.28125,'pressure':101300.7,'status':'heartbeat','temperature':30.921875,'time':1748400546,'voltage':3.765625}",
            "created_at": "2025-05-31T16:56:38.630055Z",
            "received_by_notehub": "2025-05-31T16:56:38.393000Z",
            "when_captured_by_device": "2025-05-31T16:56:18Z",
            "best_location_when": "2025-05-31T16:52:54Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "30.92",
            "humidity": "44.28",
            "pressure": "101300.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186298/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.765625"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':2,'seconds':90,'status':'no-sat','temperature':31.8125,'usb':true,'voltage':5.1875}",
            "created_at": "2025-05-31T17:11:09.897868Z",
            "received_by_notehub": "2025-05-31T17:11:09.704000Z",
            "when_captured_by_device": "2025-05-31T17:10:38Z",
            "best_location_when": "2025-05-31T17:11:09Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.81",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186299/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.1875"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':33.25,'pressure':98362.09,'status':'heartbeat','temperature':26.28125,'time':1748612246,'voltage':4.3046875}",
            "created_at": "2025-05-31T17:25:09.327871Z",
            "received_by_notehub": "2025-05-31T17:25:09.136000Z",
            "when_captured_by_device": "2025-05-31T17:19:22Z",
            "best_location_when": "2025-05-31T17:14:50Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "26.28",
            "humidity": "33.25",
            "pressure": "98362.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186300/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.875,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T17:27:32.802625Z",
            "received_by_notehub": "2025-05-31T17:27:32.575000Z",
            "when_captured_by_device": "2025-05-31T17:27:12Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.88",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186301/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':81.9375,'pressure':98720.69,'status':'heartbeat','temperature':15.9765625,'time':1748618174,'voltage':3.8769531}",
            "created_at": "2025-05-31T17:40:33.160690Z",
            "received_by_notehub": "2025-05-31T17:40:32.925000Z",
            "when_captured_by_device": "2025-05-31T17:20:36Z",
            "best_location_when": "2025-05-30T20:22:54Z",
            "best_location_type": "gps",
            "latitude": "45.4978925",
            "longitude": "-73.69340234",
            "temperature": "15.98",
            "humidity": "81.94",
            "pressure": "98720.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186302/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8769531"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':50.875,'pressure':101342.6,'status':'heartbeat','temperature':28.59375,'time':1748400546,'voltage':3.7617188}",
            "created_at": "2025-05-31T17:57:34.363172Z",
            "received_by_notehub": "2025-05-31T17:57:34.173000Z",
            "when_captured_by_device": "2025-05-31T17:57:14Z",
            "best_location_when": "2025-05-31T17:53:50Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "28.59",
            "humidity": "50.88",
            "pressure": "101342.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186303/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7617188"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.4375,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-05-31T18:11:06.319990Z",
            "received_by_notehub": "2025-05-31T18:11:06.055000Z",
            "when_captured_by_device": "2025-05-31T18:10:38Z",
            "best_location_when": "2025-05-31T18:11:04Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.44",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186304/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':34.09375,'pressure':98322.41,'status':'heartbeat','temperature':27.09375,'time':1748612246,'voltage':4.3007812}",
            "created_at": "2025-05-31T18:25:31.330357Z",
            "received_by_notehub": "2025-05-31T18:25:31.145000Z",
            "when_captured_by_device": "2025-05-31T18:21:42Z",
            "best_location_when": "2025-05-31T18:08:06Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "27.09",
            "humidity": "34.09",
            "pressure": "98322.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186305/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3007812"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.4375,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T18:27:37.173641Z",
            "received_by_notehub": "2025-05-31T18:27:36.910000Z",
            "when_captured_by_device": "2025-05-31T18:27:20Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.44",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186306/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':84.5625,'pressure':98732.11,'status':'heartbeat','temperature':14.53125,'time':1748618174,'voltage':3.8867188}",
            "created_at": "2025-05-31T18:41:06.454613Z",
            "received_by_notehub": "2025-05-31T18:41:06.216000Z",
            "when_captured_by_device": "2025-05-31T18:21:20Z",
            "best_location_when": "2025-05-30T20:22:54Z",
            "best_location_type": "gps",
            "latitude": "45.4978925",
            "longitude": "-73.69340234",
            "temperature": "14.53",
            "humidity": "84.56",
            "pressure": "98732.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186307/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8867188"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':53.875,'pressure':101347.5,'status':'heartbeat','temperature':26.09375,'time':1748400546,'voltage':3.7597656}",
            "created_at": "2025-05-31T18:58:35.314616Z",
            "received_by_notehub": "2025-05-31T18:58:35.009000Z",
            "when_captured_by_device": "2025-05-31T18:58:14Z",
            "best_location_when": "2025-05-31T18:54:46Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "26.09",
            "humidity": "53.88",
            "pressure": "101347.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186308/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7597656"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.5625,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-05-31T19:11:04.523736Z",
            "received_by_notehub": "2025-05-31T19:11:04.268000Z",
            "when_captured_by_device": "2025-05-31T19:10:38Z",
            "best_location_when": "2025-05-31T19:11:03Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.56",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186309/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':32.03125,'pressure':98290.484,'status':'heartbeat','temperature':28.34375,'time':1748612246,'voltage':4.3007812}",
            "created_at": "2025-05-31T19:25:53.198306Z",
            "received_by_notehub": "2025-05-31T19:25:53.013000Z",
            "when_captured_by_device": "2025-05-31T19:24:02Z",
            "best_location_when": "2025-05-31T19:10:06Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "28.34",
            "humidity": "32.03",
            "pressure": "98290.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186310/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3007812"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.9375,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T19:27:45.540084Z",
            "received_by_notehub": "2025-05-31T19:27:45.333000Z",
            "when_captured_by_device": "2025-05-31T19:27:28Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.94",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186311/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':89.25,'jcount':1,'journey':1748718936,'motion':1,'pressure':98764.664,'seconds':91,'status':'no-sat','temperature':13.2890625,'time':1748618174,'voltage':3.8632812}",
            "created_at": "2025-05-31T19:41:41.611705Z",
            "received_by_notehub": "2025-05-31T19:41:41.410000Z",
            "when_captured_by_device": "2025-05-31T19:18:12Z",
            "best_location_when": "2025-05-30T20:22:54Z",
            "best_location_type": "gps",
            "latitude": "45.4978925",
            "longitude": "-73.69340234",
            "temperature": "13.29",
            "humidity": "89.25",
            "pressure": "98764.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186312/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8632812"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':55,'pressure':101411.11,'status':'heartbeat','temperature':23.265625,'time':1748400546,'voltage':3.75}",
            "created_at": "2025-05-31T19:59:37.809696Z",
            "received_by_notehub": "2025-05-31T19:59:37.611000Z",
            "when_captured_by_device": "2025-05-31T19:59:18Z",
            "best_location_when": "2025-05-31T19:55:42Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "23.27",
            "humidity": "55",
            "pressure": "101411.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186313/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.75"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.25,'usb':true,'voltage':5.2695312}",
            "created_at": "2025-05-31T20:11:05.293495Z",
            "received_by_notehub": "2025-05-31T20:11:05.099000Z",
            "when_captured_by_device": "2025-05-31T20:10:38Z",
            "best_location_when": "2025-05-31T20:11:04Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186314/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2695312"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':29.578125,'pressure':98290.53,'status':'heartbeat','temperature':26.78125,'time':1748612246,'voltage':4.2929688}",
            "created_at": "2025-05-31T20:26:57.346053Z",
            "received_by_notehub": "2025-05-31T20:26:57.140000Z",
            "when_captured_by_device": "2025-05-31T20:26:38Z",
            "best_location_when": "2025-05-31T20:11:54Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "26.78",
            "humidity": "29.58",
            "pressure": "98290.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186315/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2929688"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.875,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T20:27:53.512790Z",
            "received_by_notehub": "2025-05-31T20:27:53.192000Z",
            "when_captured_by_device": "2025-05-31T20:27:36Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.88",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186316/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':1.5996094,'humidity':93,'jcount':1,'journey':1748720692,'motion':1,'pressure':98775.95,'seconds':23,'temperature':12.65625,'time':1748720763,'voltage':3.8398438}",
            "created_at": "2025-05-31T20:42:15.203879Z",
            "received_by_notehub": "2025-05-31T20:42:14.989000Z",
            "when_captured_by_device": "2025-05-31T19:46:04Z",
            "best_location_when": "2025-05-31T19:46:03Z",
            "best_location_type": "gps",
            "latitude": "45.4978825",
            "longitude": "-73.69342578",
            "temperature": "12.66",
            "humidity": "93",
            "pressure": "98776",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186317/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8398438"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':1.7998047,'humidity':95.3125,'jcount':1,'journey':1748722362,'motion':1,'pressure':98789.234,'seconds':21,'temperature':12.28125,'time':1748722562,'voltage':3.8339844}",
            "created_at": "2025-05-31T20:42:15.360840Z",
            "received_by_notehub": "2025-05-31T20:42:14.991000Z",
            "when_captured_by_device": "2025-05-31T20:16:03Z",
            "best_location_when": "2025-05-31T20:16:02Z",
            "best_location_type": "gps",
            "latitude": "45.4979275",
            "longitude": "-73.69345703",
            "temperature": "12.28",
            "humidity": "95.31",
            "pressure": "98789.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186318/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8339844"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':59.625,'pressure':101477.125,'status':'heartbeat','temperature':20.796875,'time':1748400546,'voltage':3.7421875}",
            "created_at": "2025-05-31T21:00:50.363608Z",
            "received_by_notehub": "2025-05-31T21:00:50.183000Z",
            "when_captured_by_device": "2025-05-31T21:00:30Z",
            "best_location_when": "2025-05-31T20:56:46Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "20.8",
            "humidity": "59.62",
            "pressure": "101477.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186319/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7421875"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.375,'usb':true,'voltage':5.265625}",
            "created_at": "2025-05-31T21:11:06.071677Z",
            "received_by_notehub": "2025-05-31T21:11:05.839000Z",
            "when_captured_by_device": "2025-05-31T21:10:39Z",
            "best_location_when": "2025-05-31T21:11:05Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.38",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186320/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.5625,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T21:28:01.249052Z",
            "received_by_notehub": "2025-05-31T21:28:00.973000Z",
            "when_captured_by_device": "2025-05-31T21:27:44Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.56",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186321/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':28.96875,'pressure':98288.22,'status':'heartbeat','temperature':24.46875,'time':1748612246,'voltage':4.2890625}",
            "created_at": "2025-05-31T21:29:17.288001Z",
            "received_by_notehub": "2025-05-31T21:29:17.095000Z",
            "when_captured_by_device": "2025-05-31T21:28:58Z",
            "best_location_when": "2025-05-31T21:14:14Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "24.47",
            "humidity": "28.97",
            "pressure": "98288.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186322/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2890625"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':93.875,'pressure':98802.25,'status':'heartbeat','temperature':12.484375,'time':1748722562,'voltage':3.8789062}",
            "created_at": "2025-05-31T21:42:48.213882Z",
            "received_by_notehub": "2025-05-31T21:42:47.961000Z",
            "when_captured_by_device": "2025-05-31T21:16:48Z",
            "best_location_when": "2025-05-31T21:15:40Z",
            "best_location_type": "gps",
            "latitude": "45.4979275",
            "longitude": "-73.69345703",
            "temperature": "12.48",
            "humidity": "93.88",
            "pressure": "98802.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186323/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8789062"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1748728505,'motion':1,'seconds':90,'status':'no-sat','temperature':32,'usb':true,'voltage':5.265625}",
            "created_at": "2025-05-31T21:57:02.165720Z",
            "received_by_notehub": "2025-05-31T21:57:01.897000Z",
            "when_captured_by_device": "2025-05-31T21:56:35Z",
            "best_location_when": "2025-05-31T21:57:01Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186324/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':64.6875,'pressure':101476.19,'status':'heartbeat','temperature':19.546875,'time':1748400546,'voltage':3.7285156}",
            "created_at": "2025-05-31T22:02:04.747289Z",
            "received_by_notehub": "2025-05-31T22:02:04.425000Z",
            "when_captured_by_device": "2025-05-31T22:01:42Z",
            "best_location_when": "2025-05-31T21:48:10Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "19.55",
            "humidity": "64.69",
            "pressure": "101476.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186325/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7285156"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.25,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T22:28:08.762067Z",
            "received_by_notehub": "2025-05-31T22:28:08.587000Z",
            "when_captured_by_device": "2025-05-31T22:27:52Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186326/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':30.640625,'pressure':98273.06,'status':'heartbeat','temperature':22.515625,'time':1748612246,'voltage':4.3046875}",
            "created_at": "2025-05-31T22:31:41.079001Z",
            "received_by_notehub": "2025-05-31T22:31:40.884000Z",
            "when_captured_by_device": "2025-05-31T22:31:22Z",
            "best_location_when": "2025-05-31T22:16:34Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "22.52",
            "humidity": "30.64",
            "pressure": "98273.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186327/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':94.625,'pressure':98814.46,'status':'heartbeat','temperature':11.3515625,'time':1748722562,'voltage':3.8789062}",
            "created_at": "2025-05-31T22:43:22.453319Z",
            "received_by_notehub": "2025-05-31T22:43:22.232000Z",
            "when_captured_by_device": "2025-05-31T22:17:32Z",
            "best_location_when": "2025-05-31T22:16:24Z",
            "best_location_type": "gps",
            "latitude": "45.4979275",
            "longitude": "-73.69345703",
            "temperature": "11.35",
            "humidity": "94.62",
            "pressure": "98814.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186328/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8789062"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':31.625,'usb':true,'voltage':5.265625}",
            "created_at": "2025-05-31T22:57:02.877604Z",
            "received_by_notehub": "2025-05-31T22:57:02.625000Z",
            "when_captured_by_device": "2025-05-31T22:56:36Z",
            "best_location_when": "2025-05-31T22:57:02Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.62",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186329/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':68.3125,'pressure':101430.42,'status':'heartbeat','temperature':18.296875,'time':1748400546,'voltage':3.7167969}",
            "created_at": "2025-05-31T23:03:29.861630Z",
            "received_by_notehub": "2025-05-31T23:03:29.654000Z",
            "when_captured_by_device": "2025-05-31T23:03:10Z",
            "best_location_when": "2025-05-31T22:49:18Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "18.3",
            "humidity": "68.31",
            "pressure": "101430.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186330/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7167969"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.25,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-05-31T23:28:17.302317Z",
            "received_by_notehub": "2025-05-31T23:28:17.071000Z",
            "when_captured_by_device": "2025-05-31T23:28:00Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186331/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':28.5,'pressure':98298.14,'status':'heartbeat','temperature':20.15625,'time':1748612246,'voltage':4.3046875}",
            "created_at": "2025-05-31T23:34:01.719500Z",
            "received_by_notehub": "2025-05-31T23:34:01.537000Z",
            "when_captured_by_device": "2025-05-31T23:33:42Z",
            "best_location_when": "2025-05-31T23:18:54Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "20.16",
            "humidity": "28.5",
            "pressure": "98298.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186332/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':95.375,'pressure':98865.94,'status':'heartbeat','temperature':11.140625,'time':1748722562,'voltage':3.8847656}",
            "created_at": "2025-05-31T23:43:56.444574Z",
            "received_by_notehub": "2025-05-31T23:43:56.223000Z",
            "when_captured_by_device": "2025-05-31T23:18:16Z",
            "best_location_when": "2025-05-31T23:15:48Z",
            "best_location_type": "gps",
            "latitude": "45.4979275",
            "longitude": "-73.69345703",
            "temperature": "11.14",
            "humidity": "95.38",
            "pressure": "98865.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186333/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8847656"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':32.1875,'usb':true,'voltage':5.265625}",
            "created_at": "2025-05-31T23:57:03.151123Z",
            "received_by_notehub": "2025-05-31T23:57:02.907000Z",
            "when_captured_by_device": "2025-05-31T23:56:36Z",
            "best_location_when": "2025-05-31T23:57:02Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "32.19",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186334/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.265625"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':76.0625,'pressure':101410.305,'status':'heartbeat','temperature':17.28125,'time':1748400546,'voltage':3.7070312}",
            "created_at": "2025-06-01T00:05:06.176001Z",
            "received_by_notehub": "2025-06-01T00:05:05.979000Z",
            "when_captured_by_device": "2025-06-01T00:04:46Z",
            "best_location_when": "2025-05-31T23:50:50Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "17.28",
            "humidity": "76.06",
            "pressure": "101410.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186335/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7070312"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1748736542,'motion':1,'seconds':94,'status':'no-sat','temperature':31.3125,'usb':true,'voltage':5.2617188}",
            "created_at": "2025-06-01T00:11:03.829515Z",
            "received_by_notehub": "2025-06-01T00:11:03.623000Z",
            "when_captured_by_device": "2025-06-01T00:10:37Z",
            "best_location_when": "2025-06-01T00:11:03Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.31",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186336/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2617188"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.6875,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-06-01T00:28:32.271518Z",
            "received_by_notehub": "2025-06-01T00:28:32.036000Z",
            "when_captured_by_device": "2025-06-01T00:28:08Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.69",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186337/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':32.34375,'pressure':98334.13,'status':'heartbeat','temperature':17.453125,'time':1748612246,'voltage':4.3007812}",
            "created_at": "2025-06-01T00:34:44.652364Z",
            "received_by_notehub": "2025-06-01T00:34:44.461000Z",
            "when_captured_by_device": "2025-06-01T00:34:26Z",
            "best_location_when": "2025-06-01T00:21:14Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "17.45",
            "humidity": "32.34",
            "pressure": "98334.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186338/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3007812"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':98.1875,'pressure':98931.61,'status':'heartbeat','temperature':10.8828125,'time':1748722562,'voltage':3.8769531}",
            "created_at": "2025-06-01T00:44:30.260847Z",
            "received_by_notehub": "2025-06-01T00:44:30.030000Z",
            "when_captured_by_device": "2025-06-01T00:19:00Z",
            "best_location_when": "2025-06-01T00:16:32Z",
            "best_location_type": "gps",
            "latitude": "45.4979275",
            "longitude": "-73.69345703",
            "temperature": "10.88",
            "humidity": "98.19",
            "pressure": "98931.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186339/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8769531"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':80.25,'pressure':101377.664,'status':'heartbeat','temperature':16.25,'time':1748400546,'voltage':3.6992188}",
            "created_at": "2025-06-01T01:06:41.530447Z",
            "received_by_notehub": "2025-06-01T01:06:41.331000Z",
            "when_captured_by_device": "2025-06-01T01:06:22Z",
            "best_location_when": "2025-06-01T00:52:22Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "16.25",
            "humidity": "80.25",
            "pressure": "101377.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186340/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6992188"
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':31.5,'usb':true,'voltage':5.2578125}",
            "created_at": "2025-06-01T01:11:10.353678Z",
            "received_by_notehub": "2025-06-01T01:11:10.137000Z",
            "when_captured_by_device": "2025-06-01T01:10:44Z",
            "best_location_when": "2025-06-01T01:11:09Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "31.5",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186341/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.2578125"
        },
        {
            "arduino_name": "Ayiti_Blues_52738:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':21.5,'time':1747824422,'usb':true,'voltage':5.2226562}",
            "created_at": "2025-06-01T01:28:33.037821Z",
            "received_by_notehub": "2025-06-01T01:28:32.769000Z",
            "when_captured_by_device": "2025-06-01T01:28:16Z",
            "best_location_when": "2025-05-22T09:50:04Z",
            "best_location_type": "gps",
            "latitude": "45.4979625",
            "longitude": "-73.69334766",
            "temperature": "21.5",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186342/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.2226562"
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':35.75,'pressure':98393.19,'status':'heartbeat','temperature':14.9296875,'time':1748612246,'voltage':4.296875}",
            "created_at": "2025-06-01T01:36:24.530789Z",
            "received_by_notehub": "2025-06-01T01:36:24.274000Z",
            "when_captured_by_device": "2025-06-01T01:36:06Z",
            "best_location_when": "2025-06-01T01:22:02Z",
            "best_location_type": "gps",
            "latitude": "39.8576525",
            "longitude": "-86.09641797",
            "temperature": "14.93",
            "humidity": "35.75",
            "pressure": "98393.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186343/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.296875"
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:M 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':99.1875,'pressure':98996.086,'status':'heartbeat','temperature':10.515625,'time':1748722562,'voltage':3.8632812}",
            "created_at": "2025-06-01T01:45:04.429308Z",
            "received_by_notehub": "2025-06-01T01:45:04.223000Z",
            "when_captured_by_device": "2025-06-01T01:19:44Z",
            "best_location_when": "2025-06-01T01:17:16Z",
            "best_location_type": "gps",
            "latitude": "45.4979275",
            "longitude": "-73.69345703",
            "temperature": "10.52",
            "humidity": "99.19",
            "pressure": "98996.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186344/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8632812"
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':83.5625,'pressure':101376.54,'status':'heartbeat','temperature':15.59375,'time':1748400546,'voltage':3.6875}",
            "created_at": "2025-06-01T02:08:18.256826Z",
            "received_by_notehub": "2025-06-01T02:08:18.063000Z",
            "when_captured_by_device": "2025-06-01T02:07:58Z",
            "best_location_when": "2025-06-01T01:53:58Z",
            "best_location_type": "gps",
            "latitude": "50.6310225",
            "longitude": "3.08494141",
            "temperature": "15.59",
            "humidity": "83.56",
            "pressure": "101376.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/186345/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6875"
        }
    ]
}