GET /api/v1/reports/?format=api&ordering=id&page=2120
HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 133409,
    "next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=2121",
    "previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=id&page=2119",
    "results": [
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':1,'seconds':90,'status':'no-sat','temperature':26.9375,'voltage':4.203125}",
            "created_at": "2025-03-27T16:11:12.475017Z",
            "received_by_notehub": "2025-03-27T16:11:12.145000Z",
            "when_captured_by_device": "2025-03-27T16:10:40Z",
            "best_location_when": "2025-03-27T16:11:11Z",
            "best_location_type": "tower",
            "latitude": "19.466808",
            "longitude": "-71.355538",
            "temperature": "26.94",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176027/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.203125",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176027
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':41.625,'pressure':99788.68,'status':'heartbeat','temperature':14.0703125,'time':1743021657,'voltage':4.3046875}",
            "created_at": "2025-03-27T16:12:49.001199Z",
            "received_by_notehub": "2025-03-27T16:12:48.809000Z",
            "when_captured_by_device": "2025-03-27T15:42:02Z",
            "best_location_when": "2025-03-27T14:06:38Z",
            "best_location_type": "gps",
            "latitude": "39.8798275",
            "longitude": "-86.08217578",
            "temperature": "14.07",
            "humidity": "41.62",
            "pressure": "99788.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176028/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176028
        },
        {
            "arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':18.3125,'time':1741806197,'usb':true,'voltage':5.21875}",
            "created_at": "2025-03-27T16:16:03.531526Z",
            "received_by_notehub": "2025-03-27T16:16:03.312000Z",
            "when_captured_by_device": "2025-03-27T16:15:47Z",
            "best_location_when": "2025-03-15T11:11:48Z",
            "best_location_type": "gps",
            "latitude": "45.4980275",
            "longitude": "-73.69328516",
            "temperature": "18.31",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176029/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.21875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176029
        },
        {
            "arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
            "which_file": "",
            "uptime": "uptime: 1689209329 623.655days 2023-07-13T00:48:49Z 17C 62F, 48%RH, now: 2025-03-27T16:32:23Z, USB Status:True, Offset: -1C, 8%RH",
            "created_at": "2025-03-27T16:33:00.584530Z",
            "received_by_notehub": null,
            "when_captured_by_device": null,
            "best_location_when": null,
            "best_location_type": "",
            "latitude": "39.88020706",
            "longitude": "-86.08297729",
            "temperature": "16.78",
            "humidity": "48.27",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176030/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
            "voltage": "",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176030
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1743093541,'motion':5,'seconds':90,'status':'no-sat','temperature':27.375,'voltage':4.203125}",
            "created_at": "2025-03-27T16:41:12.130540Z",
            "received_by_notehub": "2025-03-27T16:41:11.943000Z",
            "when_captured_by_device": "2025-03-27T16:40:40Z",
            "best_location_when": "2025-03-27T16:11:11Z",
            "best_location_type": "tower",
            "latitude": "19.466808",
            "longitude": "-71.355538",
            "temperature": "27.38",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176031/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.203125",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176031
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:P 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':49.125,'pressure':101806.8,'status':'heartbeat','temperature':6.6289062,'time':1742922966,'voltage':3.8320312}",
            "created_at": "2025-03-27T16:50:45.310510Z",
            "received_by_notehub": "2025-03-27T16:50:44.985000Z",
            "when_captured_by_device": "2025-03-27T16:50:08Z",
            "best_location_when": "2025-03-27T16:47:16Z",
            "best_location_type": "gps",
            "latitude": "45.4978725",
            "longitude": "-73.69324609",
            "temperature": "6.63",
            "humidity": "49.12",
            "pressure": "101806.8",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176032/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8320312",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176032
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':1.2998047,'humidity':43.5,'motion':2,'pressure':99751.9,'seconds':19,'temperature':15.828125,'time':1743093257,'voltage':3.7949219}",
            "created_at": "2025-03-27T17:11:25.537218Z",
            "received_by_notehub": "2025-03-27T17:11:25.345000Z",
            "when_captured_by_device": "2025-03-27T16:34:18Z",
            "best_location_when": "2025-03-27T16:34:17Z",
            "best_location_type": "gps",
            "latitude": "39.8797275",
            "longitude": "-86.08290234",
            "temperature": "15.83",
            "humidity": "43.5",
            "pressure": "99751.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176033/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.7949219",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176033
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':2.4003906,'humidity':35.65625,'motion':1,'pressure':99749.2,'seconds':25,'temperature':15.9375,'time':1743093439,'voltage':4.2539062}",
            "created_at": "2025-03-27T17:13:10.958713Z",
            "received_by_notehub": "2025-03-27T17:13:10.743000Z",
            "when_captured_by_device": "2025-03-27T16:37:19Z",
            "best_location_when": "2025-03-27T16:37:19Z",
            "best_location_type": "gps",
            "latitude": "39.8796875",
            "longitude": "-86.08237109",
            "temperature": "15.94",
            "humidity": "35.66",
            "pressure": "99749.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176034/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2539062",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176034
        },
        {
            "arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':18.4375,'time':1741806197,'usb':true,'voltage':5.21875}",
            "created_at": "2025-03-27T17:16:11.330514Z",
            "received_by_notehub": "2025-03-27T17:16:11.105000Z",
            "when_captured_by_device": "2025-03-27T17:15:55Z",
            "best_location_when": "2025-03-15T11:11:48Z",
            "best_location_type": "gps",
            "latitude": "45.4980275",
            "longitude": "-73.69328516",
            "temperature": "18.44",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176035/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.21875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176035
        },
        {
            "arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
            "which_file": "",
            "uptime": "uptime: 1689209329 623.697days 2023-07-13T00:48:49Z 17C 62F, 47%RH, now: 2025-03-27T17:32:23Z, USB Status:True, Offset: -1C, 8%RH",
            "created_at": "2025-03-27T17:33:01.181146Z",
            "received_by_notehub": null,
            "when_captured_by_device": null,
            "best_location_when": null,
            "best_location_type": "",
            "latitude": "39.88020706",
            "longitude": "-86.08297729",
            "temperature": "16.76",
            "humidity": "47.10",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176036/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
            "voltage": "",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176036
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':28.4375,'voltage':4.2265625}",
            "created_at": "2025-03-27T17:41:04.763547Z",
            "received_by_notehub": "2025-03-27T17:41:04.583000Z",
            "when_captured_by_device": "2025-03-27T17:40:42Z",
            "best_location_when": "2025-03-27T16:11:11Z",
            "best_location_type": "tower",
            "latitude": "19.466808",
            "longitude": "-71.355538",
            "temperature": "28.44",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176037/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.2265625",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176037
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:P 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':56.09375,'pressure':101738.016,'status':'heartbeat','temperature':8.578125,'time':1742922966,'voltage':3.8359375}",
            "created_at": "2025-03-27T17:53:06.441606Z",
            "received_by_notehub": "2025-03-27T17:53:06.228000Z",
            "when_captured_by_device": "2025-03-27T17:52:28Z",
            "best_location_when": "2025-03-27T17:47:08Z",
            "best_location_type": "gps",
            "latitude": "45.4978725",
            "longitude": "-73.69324609",
            "temperature": "8.58",
            "humidity": "56.09",
            "pressure": "101738",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176038/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8359375",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176038
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':2,'humidity':43.71875,'jcount':1,'journey':1743096735,'motion':1,'pressure':99738.34,'seconds':18,'temperature':16.75,'time':1743096856,'voltage':3.796875}",
            "created_at": "2025-03-27T18:11:47.919741Z",
            "received_by_notehub": "2025-03-27T18:11:47.693000Z",
            "when_captured_by_device": "2025-03-27T17:34:17Z",
            "best_location_when": "2025-03-27T17:34:16Z",
            "best_location_type": "gps",
            "latitude": "39.8797425",
            "longitude": "-86.08244922",
            "temperature": "16.75",
            "humidity": "43.72",
            "pressure": "99738.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176039/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.796875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176039
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':39.46875,'pressure':99733.66,'status':'heartbeat','temperature':16.890625,'time':1743093439,'voltage':4.2460938}",
            "created_at": "2025-03-27T18:13:32.704246Z",
            "received_by_notehub": "2025-03-27T18:13:32.496000Z",
            "when_captured_by_device": "2025-03-27T17:37:22Z",
            "best_location_when": "2025-03-27T17:11:18Z",
            "best_location_type": "gps",
            "latitude": "39.8796875",
            "longitude": "-86.08237109",
            "temperature": "16.89",
            "humidity": "39.47",
            "pressure": "99733.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176040/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2460938",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176040
        },
        {
            "arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':18.3125,'time':1741806197,'usb':true,'voltage':5.21875}",
            "created_at": "2025-03-27T18:16:21.775851Z",
            "received_by_notehub": "2025-03-27T18:16:21.481000Z",
            "when_captured_by_device": "2025-03-27T18:16:03Z",
            "best_location_when": "2025-03-15T11:11:48Z",
            "best_location_type": "gps",
            "latitude": "45.4980275",
            "longitude": "-73.69328516",
            "temperature": "18.31",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176041/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.21875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176041
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':4.2070312}",
            "created_at": "2025-03-27T18:22:37.272147Z",
            "received_by_notehub": "2025-03-27T18:22:37.086000Z",
            "when_captured_by_device": "2025-03-27T18:21:52Z",
            "best_location_when": "2025-01-08T17:28:12Z",
            "best_location_type": "gps",
            "latitude": "50.6313175",
            "longitude": "3.08501953",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176042/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.2070312",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176042
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1743099709,'motion':6,'status':'usb','temperature':21.25,'time':1735640844,'voltage':4.1835938}",
            "created_at": "2025-03-27T18:22:37.657975Z",
            "received_by_notehub": "2025-03-27T18:22:37.612000Z",
            "when_captured_by_device": "2025-03-27T18:21:54Z",
            "best_location_when": "2025-01-08T17:28:12Z",
            "best_location_type": "gps",
            "latitude": "50.6313175",
            "longitude": "3.08501953",
            "temperature": "21.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176043/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.1835938",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176043
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.9296875}",
            "created_at": "2025-03-27T18:24:03.381825Z",
            "received_by_notehub": "2025-03-27T18:24:03.150000Z",
            "when_captured_by_device": "2025-03-27T18:23:47Z",
            "best_location_when": "2025-01-08T17:28:12Z",
            "best_location_type": "gps",
            "latitude": "50.6313175",
            "longitude": "3.08501953",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176044/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.9296875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176044
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':2,'journey':1743099709,'motion':4,'status':'usb','temperature':21.25,'time':1735640844,'usb':true,'voltage':4.953125}",
            "created_at": "2025-03-27T18:24:03.749152Z",
            "received_by_notehub": "2025-03-27T18:24:03.690000Z",
            "when_captured_by_device": "2025-03-27T18:23:49Z",
            "best_location_when": "2025-01-08T17:28:12Z",
            "best_location_type": "gps",
            "latitude": "50.6313175",
            "longitude": "3.08501953",
            "temperature": "21.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176045/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.953125",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176045
        },
        {
            "arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
            "which_file": "",
            "uptime": "uptime: 1689209329 623.739days 2023-07-13T00:48:49Z 17C 62F, 46%RH, now: 2025-03-27T18:32:24Z, USB Status:True, Offset: -1C, 8%RH",
            "created_at": "2025-03-27T18:33:01.221015Z",
            "received_by_notehub": null,
            "when_captured_by_device": null,
            "best_location_when": null,
            "best_location_type": "",
            "latitude": "39.88020706",
            "longitude": "-86.08297729",
            "temperature": "16.75",
            "humidity": "45.98",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176046/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
            "voltage": "",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176046
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':4.1367188}",
            "created_at": "2025-03-27T18:35:08.181758Z",
            "received_by_notehub": "2025-03-27T18:35:07.928000Z",
            "when_captured_by_device": "2025-03-27T18:34:13Z",
            "best_location_when": "2025-01-08T17:28:12Z",
            "best_location_type": "gps",
            "latitude": "50.6313175",
            "longitude": "3.08501953",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176047/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.1367188",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176047
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1743100453,'motion':1,'status':'usb','temperature':23.875,'time':1735640844,'voltage':4.171875}",
            "created_at": "2025-03-27T18:35:08.579398Z",
            "received_by_notehub": "2025-03-27T18:35:08.527000Z",
            "when_captured_by_device": "2025-03-27T18:34:15Z",
            "best_location_when": "2025-01-08T17:28:12Z",
            "best_location_type": "gps",
            "latitude": "50.6313175",
            "longitude": "3.08501953",
            "temperature": "23.88",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176048/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.171875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176048
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':28.4375,'voltage':4.2539062}",
            "created_at": "2025-03-27T18:41:14.091096Z",
            "received_by_notehub": "2025-03-27T18:41:13.819000Z",
            "when_captured_by_device": "2025-03-27T18:40:42Z",
            "best_location_when": "2025-03-24T19:41:11Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "28.44",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176049/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.2539062",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176049
        },
        {
            "arduino_name": "NCA_WBGLW:x17148:P 10x10SolarLIC BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':53.59375,'pressure':101652.055,'status':'heartbeat','temperature':9.5859375,'time':1742922966,'voltage':3.8359375}",
            "created_at": "2025-03-27T18:55:22.619119Z",
            "received_by_notehub": "2025-03-27T18:55:22.366000Z",
            "when_captured_by_device": "2025-03-27T18:54:44Z",
            "best_location_when": "2025-03-27T18:49:32Z",
            "best_location_type": "gps",
            "latitude": "45.4978725",
            "longitude": "-73.69324609",
            "temperature": "9.59",
            "humidity": "53.59",
            "pressure": "101652.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176050/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/33/?format=api",
            "voltage": "3.8359375",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176050
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':50.65625,'pressure':99715.336,'status':'heartbeat','temperature':14.203125,'time':1743096856,'voltage':3.84375}",
            "created_at": "2025-03-27T19:12:10.808601Z",
            "received_by_notehub": "2025-03-27T19:12:10.488000Z",
            "when_captured_by_device": "2025-03-27T18:36:47Z",
            "best_location_when": "2025-03-27T18:34:07Z",
            "best_location_type": "gps",
            "latitude": "39.8797425",
            "longitude": "-86.08244922",
            "temperature": "14.2",
            "humidity": "50.66",
            "pressure": "99715.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176051/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.84375",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176051
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'boot (brown-out \\u0026 hard reset [16026])','voltage':5.03125}",
            "created_at": "2025-03-27T19:12:20.988628Z",
            "received_by_notehub": "2025-03-27T19:12:20.708000Z",
            "when_captured_by_device": "2025-03-27T19:12:02Z",
            "best_location_when": "2025-03-25T19:48:28Z",
            "best_location_type": "tower",
            "latitude": "50.632133",
            "longitude": "3.087167",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176052/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "5.03125",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176052
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':43.25,'pressure':99703.08,'status':'heartbeat','temperature':14.5,'time':1743093439,'voltage':4.2890625}",
            "created_at": "2025-03-27T19:13:54.971707Z",
            "received_by_notehub": "2025-03-27T19:13:54.780000Z",
            "when_captured_by_device": "2025-03-27T18:38:54Z",
            "best_location_when": "2025-03-27T17:11:18Z",
            "best_location_type": "gps",
            "latitude": "39.8796875",
            "longitude": "-86.08237109",
            "temperature": "14.5",
            "humidity": "43.25",
            "pressure": "99703.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176053/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2890625",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176053
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1743102722,'seconds':90,'status':'no-sat','temperature':24.25,'usb':true,'voltage':4.9609375}",
            "created_at": "2025-03-27T19:14:46.200478Z",
            "received_by_notehub": "2025-03-27T19:14:45.992000Z",
            "when_captured_by_device": "2025-03-27T19:14:12Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "24.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176054/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.9609375",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176054
        },
        {
            "arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':18.375,'time':1741806197,'usb':true,'voltage':5.21875}",
            "created_at": "2025-03-27T19:16:29.813377Z",
            "received_by_notehub": "2025-03-27T19:16:29.605000Z",
            "when_captured_by_device": "2025-03-27T19:16:11Z",
            "best_location_when": "2025-03-15T11:11:48Z",
            "best_location_type": "gps",
            "latitude": "45.4980275",
            "longitude": "-73.69328516",
            "temperature": "18.38",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176055/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
            "voltage": "5.21875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176055
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'boot (brown-out \\u0026 hard reset [16026])','voltage':4.9648438}",
            "created_at": "2025-03-27T19:28:24.340301Z",
            "received_by_notehub": "2025-03-27T19:28:24.143000Z",
            "when_captured_by_device": "2025-03-27T19:28:06Z",
            "best_location_when": "2025-03-25T19:48:28Z",
            "best_location_type": "tower",
            "latitude": "50.632133",
            "longitude": "3.087167",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176056/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.9648438",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176056
        },
        {
            "arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
            "which_file": "",
            "uptime": "uptime: 1689209329 623.780days 2023-07-13T00:48:49Z 17C 62F, 47%RH, now: 2025-03-27T19:32:24Z, USB Status:True, Offset: -1C, 8%RH",
            "created_at": "2025-03-27T19:33:04.048896Z",
            "received_by_notehub": null,
            "when_captured_by_device": null,
            "best_location_when": null,
            "best_location_type": "",
            "latitude": "39.88020706",
            "longitude": "-86.08297729",
            "temperature": "16.73",
            "humidity": "47.36",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176057/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
            "voltage": "",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176057
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':40.40625,'jcount':1,'journey':1743103686,'pressure':101630.35,'seconds':90,'status':'no-sat','temperature':22.265625,'usb':true,'voltage':4.9726562}",
            "created_at": "2025-03-27T19:34:41.329024Z",
            "received_by_notehub": "2025-03-27T19:34:41.138000Z",
            "when_captured_by_device": "2025-03-27T19:30:16Z",
            "best_location_when": "2025-03-25T19:48:28Z",
            "best_location_type": "tower",
            "latitude": "50.632133",
            "longitude": "3.087167",
            "temperature": "22.27",
            "humidity": "40.41",
            "pressure": "101630.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176058/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.9726562",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176058
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':40.40625,'pressure':101630.35,'seconds':90,'status':'no-sat','temperature':22.265625,'usb':true,'voltage':4.9648438}",
            "created_at": "2025-03-27T19:34:41.490752Z",
            "received_by_notehub": "2025-03-27T19:34:41.140000Z",
            "when_captured_by_device": "2025-03-27T19:34:13Z",
            "best_location_when": "2025-03-25T19:48:28Z",
            "best_location_type": "tower",
            "latitude": "50.632133",
            "longitude": "3.087167",
            "temperature": "22.27",
            "humidity": "40.41",
            "pressure": "101630.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176059/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.9648438",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176059
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':28.5,'voltage':4.2539062}",
            "created_at": "2025-03-27T19:41:09.670791Z",
            "received_by_notehub": "2025-03-27T19:41:09.467000Z",
            "when_captured_by_device": "2025-03-27T19:40:42Z",
            "best_location_when": "2025-03-24T19:41:11Z",
            "best_location_type": "tower",
            "latitude": "19.468957",
            "longitude": "-71.366211",
            "temperature": "28.5",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176060/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.2539062",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176060
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'boot (brown-out \\u0026 hard reset [16026])','voltage':3.3652344}",
            "created_at": "2025-03-27T19:50:12.859844Z",
            "received_by_notehub": "2025-03-27T19:50:12.655000Z",
            "when_captured_by_device": "2025-03-27T19:49:53Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176061/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.3652344",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176061
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.6367188}",
            "created_at": "2025-03-27T19:51:09.592662Z",
            "received_by_notehub": "2025-03-27T19:51:09.378000Z",
            "when_captured_by_device": "2025-03-27T19:50:26Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176062/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.6367188",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176062
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':3.7460938}",
            "created_at": "2025-03-27T19:51:09.771850Z",
            "received_by_notehub": "2025-03-27T19:51:09.393000Z",
            "when_captured_by_device": "2025-03-27T19:50:30Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176063/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7460938",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176063
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.4882812}",
            "created_at": "2025-03-27T19:51:09.874955Z",
            "received_by_notehub": "2025-03-27T19:51:09.407000Z",
            "when_captured_by_device": "2025-03-27T19:50:32Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176064/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.4882812",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176064
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':3.4296875}",
            "created_at": "2025-03-27T19:51:09.983817Z",
            "received_by_notehub": "2025-03-27T19:51:09.424000Z",
            "when_captured_by_device": "2025-03-27T19:50:34Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176065/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.4296875",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176065
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.4609375}",
            "created_at": "2025-03-27T19:51:10.095013Z",
            "received_by_notehub": "2025-03-27T19:51:09.437000Z",
            "when_captured_by_device": "2025-03-27T19:50:36Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176066/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.4609375",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176066
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':3.5507812}",
            "created_at": "2025-03-27T19:51:10.263412Z",
            "received_by_notehub": "2025-03-27T19:51:09.450000Z",
            "when_captured_by_device": "2025-03-27T19:50:38Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176067/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.5507812",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176067
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.5507812}",
            "created_at": "2025-03-27T19:51:10.364802Z",
            "received_by_notehub": "2025-03-27T19:51:09.466000Z",
            "when_captured_by_device": "2025-03-27T19:50:40Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176068/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.5507812",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176068
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':3.3339844}",
            "created_at": "2025-03-27T19:51:10.464489Z",
            "received_by_notehub": "2025-03-27T19:51:09.481000Z",
            "when_captured_by_device": "2025-03-27T19:50:41Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176069/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.3339844",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176069
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.5}",
            "created_at": "2025-03-27T19:51:10.570658Z",
            "received_by_notehub": "2025-03-27T19:51:09.498000Z",
            "when_captured_by_device": "2025-03-27T19:50:42Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176070/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.5",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176070
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.4414062}",
            "created_at": "2025-03-27T19:51:10.668526Z",
            "received_by_notehub": "2025-03-27T19:51:09.511000Z",
            "when_captured_by_device": "2025-03-27T19:50:43Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176071/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.4414062",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176071
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':3.5136719}",
            "created_at": "2025-03-27T19:51:10.767527Z",
            "received_by_notehub": "2025-03-27T19:51:09.524000Z",
            "when_captured_by_device": "2025-03-27T19:50:46Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176072/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.5136719",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176072
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':4.5351562}",
            "created_at": "2025-03-27T19:51:10.865442Z",
            "received_by_notehub": "2025-03-27T19:51:09.538000Z",
            "when_captured_by_device": "2025-03-27T19:50:48Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176073/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.5351562",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176073
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':40.8125,'jcount':1,'journey':1743104993,'motion':21,'pressure':101620.69,'status':'usb','temperature':22.0625,'usb':true,'voltage':4.640625}",
            "created_at": "2025-03-27T19:51:10.965285Z",
            "received_by_notehub": "2025-03-27T19:51:10.196000Z",
            "when_captured_by_device": "2025-03-27T19:50:28Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "22.06",
            "humidity": "40.81",
            "pressure": "101620.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176074/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.640625",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176074
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':40.8125,'jcount':2,'journey':1743104993,'pressure':101620.69,'status':'usb','temperature':22.0625,'voltage':3.3964844}",
            "created_at": "2025-03-27T19:51:11.071066Z",
            "received_by_notehub": "2025-03-27T19:51:10.201000Z",
            "when_captured_by_device": "2025-03-27T19:50:31Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "22.06",
            "humidity": "40.81",
            "pressure": "101620.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176075/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.3964844",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176075
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':40.8125,'jcount':3,'journey':1743104993,'pressure':101620.69,'status':'usb','temperature':22.0625,'usb':true,'voltage':4.0976562}",
            "created_at": "2025-03-27T19:51:11.171311Z",
            "received_by_notehub": "2025-03-27T19:51:10.205000Z",
            "when_captured_by_device": "2025-03-27T19:50:33Z",
            "best_location_when": "2025-03-25T19:44:49Z",
            "best_location_type": "tower",
            "latitude": "50.628164",
            "longitude": "3.081701",
            "temperature": "22.06",
            "humidity": "40.81",
            "pressure": "101620.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/176076/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "4.0976562",
            "t_lat": "",
            "t_lon": "",
            "t_when": null,
            "t_loc": "",
            "t_country": "",
            "t_id": "",
            "t_tz": "",
            "gpsfix_time": null,
            "id": 176076
        }
    ]
}