HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 155862,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=682",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=680",
"results": [
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T05:35:48.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 23.6C/0%RH, voltage: 5.22",
"created_at": "2024-08-01T05:36:01.423787Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "23.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137396/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137396
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.211days 2023-07-13T00:48:49Z 26C 79F, 54%RH, now: 2024-08-01T05:52:43Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T05:53:28.373163Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "26.02",
"humidity": "54.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137397/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137397
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T05:39:26.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.9C/54.4%RH, voltage: 4.23",
"created_at": "2024-08-01T05:57:29.459716Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.9",
"humidity": "54.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137398/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137398
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.680days 2023-07-12T13:44:32Z 27C 80F, 52%RH, now: 2024-08-01T06:03:47Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T06:04:24.501545Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.80",
"humidity": "52.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137399/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137399
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T06:08:55.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 28.4C/0%RH, voltage: 5.24",
"created_at": "2024-08-01T06:09:01.153039Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "28.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137400/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137400
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T06:15:38.000Z, file: _track.qo, location(gps): 19.4740225,-71.34473828, 32.8C/0%RH, voltage: 4.13",
"created_at": "2024-08-01T06:16:12.446083Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4740225",
"longitude": "-71.34473828",
"temperature": "32.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137401/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137401
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T06:17:47.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 38.7C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T06:18:16.394804Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "38.66",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137402/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137402
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T06:21:18.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.5C/54.4%RH, voltage: 5.43",
"created_at": "2024-08-01T06:21:26.763617Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.55",
"humidity": "54.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137403/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137403
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T06:35:56.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 23.9C/0%RH, voltage: 5.22",
"created_at": "2024-08-01T06:36:08.937441Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "23.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137404/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137404
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.253days 2023-07-13T00:48:49Z 26C 79F, 55%RH, now: 2024-08-01T06:52:43Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T06:53:27.449782Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "25.93",
"humidity": "55.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137405/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137405
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T06:24:26.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.9C/55%RH, voltage: 4.23",
"created_at": "2024-08-01T06:57:30.663944Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.94",
"humidity": "54.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137406/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137406
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.722days 2023-07-12T13:44:32Z 27C 81F, 48%RH, now: 2024-08-01T07:03:52Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T07:04:31.615401Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.00",
"humidity": "47.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137407/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137407
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T07:09:03.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 28.3C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T07:09:08.781331Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "28.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137408/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137408
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T06:25:31.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 33.3C/0%RH, voltage: 4.14",
"created_at": "2024-08-01T07:15:40.339524Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "33.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137409/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137409
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T07:15:07.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 33.3C/0%RH, voltage: 4.13",
"created_at": "2024-08-01T07:15:40.537722Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "33.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137410/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137410
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T07:20:42.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 33.1C/0%RH, voltage: 4.12",
"created_at": "2024-08-01T07:21:07.708218Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "33.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137411/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137411
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T07:21:26.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.5C/54.8%RH, voltage: 5.42",
"created_at": "2024-08-01T07:21:34.708504Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.47",
"humidity": "54.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137412/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137412
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T07:36:04.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 23.7C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T07:36:17.070729Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "23.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137413/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137413
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T07:52:18.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 27.4C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T07:52:23.625736Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "27.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137414/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137414
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.294days 2023-07-13T00:48:49Z 26C 78F, 55%RH, now: 2024-08-01T07:52:43Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T07:53:28.823902Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "25.83",
"humidity": "55.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137415/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137415
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T07:09:26.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 32C/55.4%RH, voltage: 4.21",
"created_at": "2024-08-01T07:57:30.984527Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.96",
"humidity": "55.37",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137416/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137416
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T07:54:30.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.9C/55.8%RH, voltage: 4.23",
"created_at": "2024-08-01T07:57:31.170689Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.88",
"humidity": "55.8",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137417/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137417
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.763days 2023-07-12T13:44:32Z 27C 81F, 46%RH, now: 2024-08-01T08:03:57Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T08:04:31.771097Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.47",
"humidity": "45.80",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137418/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137418
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T07:17:28.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 36.2C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T08:07:38.264533Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "36.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137419/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137419
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T08:07:03.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 33.3C/0%RH, voltage: 4.13",
"created_at": "2024-08-01T08:07:38.471351Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "33.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137420/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137420
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T08:21:34.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.4C/55.4%RH, voltage: 5.43",
"created_at": "2024-08-01T08:21:41.839094Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.39",
"humidity": "55.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137421/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137421
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T08:29:42.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 33.1C/0%RH, voltage: 4.12",
"created_at": "2024-08-01T08:30:10.722163Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "33.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137422/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137422
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T08:36:12.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.1C/0%RH, voltage: 5.22",
"created_at": "2024-08-01T08:36:25.206640Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137423/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137423
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T08:52:27.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 27.8C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T08:52:32.794706Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "27.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137424/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137424
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.336days 2023-07-13T00:48:49Z 26C 78F, 56%RH, now: 2024-08-01T08:52:44Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T08:53:29.121730Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "25.74",
"humidity": "55.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137425/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137425
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T08:39:26.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.8C/55.8%RH, voltage: 4.23",
"created_at": "2024-08-01T08:57:31.012072Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.79",
"humidity": "55.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137426/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137426
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.805days 2023-07-12T13:44:32Z 28C 82F, 44%RH, now: 2024-08-01T09:04:02Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T09:04:37.892627Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.04",
"humidity": "43.60",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137427/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137427
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T09:09:57.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 33C/0%RH, voltage: 4.13",
"created_at": "2024-08-01T09:10:25.948666Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "33",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137428/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137428
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T09:21:42.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.3C/55.4%RH, voltage: 5.43",
"created_at": "2024-08-01T09:21:50.470103Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.3",
"humidity": "55.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137429/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137429
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T09:29:42.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 33.3C/0%RH, voltage: 4.16",
"created_at": "2024-08-01T09:30:01.814032Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "33.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137430/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137430
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T09:36:20.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 23.8C/0%RH, voltage: 5.22",
"created_at": "2024-08-01T09:36:32.895003Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "23.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137431/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137431
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T09:52:35.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 28.2C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T09:52:40.110724Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "28.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137432/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137432
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.378days 2023-07-13T00:48:49Z 26C 78F, 56%RH, now: 2024-08-01T09:52:44Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T09:53:29.756548Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "25.66",
"humidity": "55.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137433/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137433
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T09:24:26.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.7C/55.9%RH, voltage: 4.23",
"created_at": "2024-08-01T09:57:33.066091Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.69",
"humidity": "55.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137434/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137434
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.847days 2023-07-12T13:44:32Z 28C 83F, 43%RH, now: 2024-08-01T10:04:08Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T10:04:42.510045Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.31",
"humidity": "43.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137435/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137435
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T10:18:56.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 32.8C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T10:19:23.538813Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "32.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137436/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137436
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T10:21:50.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.2C/55.4%RH, voltage: 5.42",
"created_at": "2024-08-01T10:22:00.074337Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.22",
"humidity": "55.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137437/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137437
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T10:36:28.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.2C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T10:36:43.909821Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137438/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137438
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T10:52:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 28.7C/0%RH, voltage: 5.24",
"created_at": "2024-08-01T10:52:50.145291Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "28.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137439/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137439
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.419days 2023-07-13T00:48:49Z 26C 78F, 56%RH, now: 2024-08-01T10:52:44Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T10:53:30.477621Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "25.57",
"humidity": "55.60",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137440/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137440
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T10:09:26.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.5C/55.9%RH, voltage: 4.21",
"created_at": "2024-08-01T10:57:31.961769Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.49",
"humidity": "55.87",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137441/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137441
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T10:54:30.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.3C/55.8%RH, voltage: 4.23",
"created_at": "2024-08-01T10:57:32.163071Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.3",
"humidity": "55.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137442/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137442
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.889days 2023-07-12T13:44:32Z 29C 84F, 42%RH, now: 2024-08-01T11:04:13Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T11:04:48.233852Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.91",
"humidity": "42.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137443/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137443
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T11:08:20.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 32.8C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T11:08:45.684748Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "32.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137444/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137444
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T10:19:01.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 33C/0%RH, voltage: 4.12",
"created_at": "2024-08-01T11:19:34.290516Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "33",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137445/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137445
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T11:19:01.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 32.3C/0%RH, voltage: 4.17",
"created_at": "2024-08-01T11:19:34.826669Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "32.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137446/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137446
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T11:21:58.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.1C/55.4%RH, voltage: 5.43",
"created_at": "2024-08-01T11:22:05.612958Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.11",
"humidity": "55.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137447/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137447
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T11:36:36.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.3C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T11:36:49.983706Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137448/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137448
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T11:52:51.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 29.1C/0%RH, voltage: 5.24",
"created_at": "2024-08-01T11:52:56.307676Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "29.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137449/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137449
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.461days 2023-07-13T00:48:49Z 26C 78F, 58%RH, now: 2024-08-01T11:52:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T11:53:31.628357Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88016891",
"longitude": "-86.08198547",
"temperature": "25.55",
"humidity": "58.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137450/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137450
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T11:56:12.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.3C/59.3%RH, voltage: 5.42",
"created_at": "2024-08-01T11:56:22.677470Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.33",
"humidity": "59.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137451/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137451
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T11:39:30.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 31.1C/55.8%RH, voltage: 4.23",
"created_at": "2024-08-01T11:57:35.081033Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "31.13",
"humidity": "55.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137452/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137452
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.930days 2023-07-12T13:44:32Z 29C 84F, 43%RH, now: 2024-08-01T12:04:18Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T12:04:53.478716Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.68",
"humidity": "43.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137453/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137453
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T12:09:08.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.6C/58.9%RH, voltage: 5.43",
"created_at": "2024-08-01T12:09:16.199048Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.64",
"humidity": "58.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137454/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137454
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T12:11:06.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 32.5C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T12:11:35.223973Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "32.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137455/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137455
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T12:21:49.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 32.1C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T12:22:23.966392Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "32.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137456/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137456
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T12:36:44.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.2C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T12:36:58.657366Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137457/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137457
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T12:41:53.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.8C/58.3%RH, voltage: 5.42",
"created_at": "2024-08-01T12:42:01.612633Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.83",
"humidity": "58.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137458/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137458
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T12:52:59.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 29.1C/0%RH, voltage: 5.24",
"created_at": "2024-08-01T12:53:08.811831Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "29.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137459/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137459
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.503days 2023-07-13T00:48:49Z 26C 78F, 59%RH, now: 2024-08-01T12:52:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T12:53:29.406849Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87984085",
"longitude": "-86.08241272",
"temperature": "25.83",
"humidity": "58.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137460/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137460
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T12:24:30.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 30.8C/56.1%RH, voltage: 4.23",
"created_at": "2024-08-01T12:57:34.324977Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "30.84",
"humidity": "56.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137461/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137461
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 385.972days 2023-07-12T13:44:32Z 29C 84F, 43%RH, now: 2024-08-01T13:04:24Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T13:04:58.822666Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.71",
"humidity": "43.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137462/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137462
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T13:11:32.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 32.5C/0%RH, voltage: 4.1",
"created_at": "2024-08-01T13:12:02.289604Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "32.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137463/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137463
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T13:33:17.000Z, file: _track.qo, location(gps): 19.4742475,-71.34428516, 31.7C/0%RH, voltage: 4.16",
"created_at": "2024-08-01T13:34:56.579824Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742475",
"longitude": "-71.34428516",
"temperature": "31.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137464/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137464
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T13:36:52.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.7C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T13:37:04.846177Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137465/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137465
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T13:42:02.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.8C/57.2%RH, voltage: 5.41",
"created_at": "2024-08-01T13:42:09.551741Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.84",
"humidity": "57.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137466/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137466
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T13:53:07.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 29.1C/0%RH, voltage: 5.24",
"created_at": "2024-08-01T13:53:16.665752Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "29.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137467/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137467
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.544days 2023-07-13T00:48:49Z 26C 79F, 58%RH, now: 2024-08-01T13:52:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T13:53:31.541848Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87984085",
"longitude": "-86.08241272",
"temperature": "26.03",
"humidity": "57.60",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137468/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137468
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T13:09:30.000Z, file: _temp.qo, where_when: , location(tower): 19.469007,-71.350571, 30.8C/56.1%RH, voltage: 4.2",
"created_at": "2024-08-01T13:57:33.907112Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.469007",
"longitude": "-71.350571",
"temperature": "30.76",
"humidity": "56.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137469/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137469
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T13:54:26.000Z, file: _temp.qo, where_when: , location(tower): 19.469007,-71.350571, 30.7C/56.1%RH, voltage: 4.23",
"created_at": "2024-08-01T13:57:34.195973Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.469007",
"longitude": "-71.350571",
"temperature": "30.69",
"humidity": "56.11",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137470/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137470
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T14:00:52.000Z, file: _track.qo, location(gps): 19.4739075,-71.34455078, 32C/0%RH, voltage: 4.1",
"created_at": "2024-08-01T14:01:17.626865Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4739075",
"longitude": "-71.34455078",
"temperature": "31.95",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137471/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137471
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 386.014days 2023-07-12T13:44:32Z 29C 84F, 44%RH, now: 2024-08-01T14:04:29Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T14:05:19.645727Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.82",
"humidity": "44.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137472/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137472
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T14:08:44.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 29.5C/0%RH, voltage: 5.24",
"created_at": "2024-08-01T14:09:00.086220Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "29.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137473/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137473
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T14:37:00.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.6C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T14:37:13.054952Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137474/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137474
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T14:39:46.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.9C/56.4%RH, voltage: 5.43",
"created_at": "2024-08-01T14:39:55.498217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.88",
"humidity": "56.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137475/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137475
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T14:39:12.000Z, file: _track.qo, location(gps): 19.4743875,-71.34479297, 32C/0%RH, voltage: 4.11",
"created_at": "2024-08-01T14:40:59.820821Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4743875",
"longitude": "-71.34479297",
"temperature": "32",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137476/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137476
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T14:51:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 29.2C/0%RH, voltage: 5.16",
"created_at": "2024-08-01T14:52:11.895537Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "29.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137477/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137477
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.586days 2023-07-13T00:48:49Z 26C 79F, 57%RH, now: 2024-08-01T14:52:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T14:53:31.530937Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08259583",
"temperature": "26.07",
"humidity": "57.21",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137478/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137478
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T14:53:55.000Z, file: _track.qo, location(gps): 19.4740625,-71.34444922, 31.2C/0%RH, voltage: 4.1",
"created_at": "2024-08-01T14:54:21.119654Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4740625",
"longitude": "-71.34444922",
"temperature": "31.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137479/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137479
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T14:57:01.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 30.2C/0%RH, voltage: 5.16",
"created_at": "2024-08-01T14:57:12.962702Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "30.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137480/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137480
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T14:39:30.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 30.7C/56.8%RH, voltage: 4.23",
"created_at": "2024-08-01T14:57:43.211307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "30.73",
"humidity": "56.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137481/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137481
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 386.056days 2023-07-12T13:44:32Z 29C 84F, 43%RH, now: 2024-08-01T15:04:34Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T15:05:08.867402Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.96",
"humidity": "43.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137482/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137482
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T15:28:47.000Z, file: _track.qo, location(gps): 19.4743875,-71.34479297, 32C/0%RH, voltage: 4.1",
"created_at": "2024-08-01T15:29:15.996571Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4743875",
"longitude": "-71.34479297",
"temperature": "32",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137483/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137483
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T15:37:08.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.7C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T15:37:20.512517Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137484/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137484
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T15:39:54.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 25.9C/56%RH, voltage: 5.42",
"created_at": "2024-08-01T15:40:01.264473Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "25.92",
"humidity": "55.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137485/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137485
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T15:43:35.000Z, file: _track.qo, location(gps): 19.4741875,-71.34441016, 31.2C/0%RH, voltage: 4.09",
"created_at": "2024-08-01T15:44:01.053706Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4741875",
"longitude": "-71.34441016",
"temperature": "31.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137486/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137486
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.628days 2023-07-13T00:48:49Z 26C 79F, 57%RH, now: 2024-08-01T15:52:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T15:53:32.065619Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08259583",
"temperature": "26.22",
"humidity": "56.80",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137487/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137487
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-08-01T15:24:43.000Z, file: _temp.qo, where_when: , location(tower): 19.475622,-71.344435, 30.6C/57.1%RH, voltage: 4.23",
"created_at": "2024-08-01T15:57:20.885240Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.475622",
"longitude": "-71.344435",
"temperature": "30.62",
"humidity": "57.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137488/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137488
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-08-01T15:57:07.000Z, file: _track.qo, location(gps): 50.6311875,3.08588672, 29.6C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T15:57:23.114377Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08588672",
"temperature": "29.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137489/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137489
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 386.097days 2023-07-12T13:44:32Z 29C 84F, 43%RH, now: 2024-08-01T16:04:40Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-08-01T16:05:18.321403Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.67",
"humidity": "43.32",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137490/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137490
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-08-01T16:09:13.000Z, file: _track.qo, where_when: 2024-07-30T16:05:02.000Z, location(gps): 39.8800375,-86.08200391, 26.1C/57.2%RH, voltage: 5.42",
"created_at": "2024-08-01T16:09:19.896177Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800375",
"longitude": "-86.08200391",
"temperature": "26.09",
"humidity": "57.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137491/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137491
},
{
"arduino_name": "Ayiti_NBGL:x52738:P no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T16:09:52.000Z, file: _track.qo, location(gps): 45.4979525,-73.69333203, 24.4C/0%RH, voltage: 5.23",
"created_at": "2024-08-01T16:10:20.697152Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69333203",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137492/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/22/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137492
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-08-01T16:18:07.000Z, file: _track.qo, location(gps): 19.4742375,-71.34424609, 31.5C/0%RH, voltage: 4.1",
"created_at": "2024-08-01T16:18:33.054386Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4742375",
"longitude": "-71.34424609",
"temperature": "31.48",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137493/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137493
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-08-01T16:32:57.000Z, file: _track.qo, location(gps): 19.4741875,-71.34441016, 31.7C/0%RH, voltage: 4.09",
"created_at": "2024-08-01T16:33:36.578699Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "19.4741875",
"longitude": "-71.34441016",
"temperature": "31.72",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137494/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137494
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 385.669days 2023-07-13T00:48:49Z 26C 80F, 57%RH, now: 2024-08-01T16:52:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-08-01T16:53:31.926104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87981796",
"longitude": "-86.08219147",
"temperature": "26.49",
"humidity": "57.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/137495/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 137495
}
]
}