HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 142050,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=559",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=557",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T10:59:46.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 22.9C/47%RH, voltage: 4.26",
"created_at": "2024-05-30T11:57:25.246259Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "22.86",
"humidity": "46.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125096/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125096
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T11:44:46.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.2C/46.6%RH, voltage: 4.26",
"created_at": "2024-05-30T11:57:25.502856Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.22",
"humidity": "46.63",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125097/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125097
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T12:05:24.000Z, file: _track.qo, location(gps): 45.4979825,-73.69332422, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T12:05:51.385055Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69332422",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125098/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125098
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T12:05:39.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20C/61.5%RH, voltage: 5.41",
"created_at": "2024-05-30T12:05:59.343253Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.05",
"humidity": "61.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125099/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125099
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T12:06:41.000Z, file: _track.qo, location(gps): 45.4980375,-73.69329297, 27.2C/0%RH, voltage: 4.18",
"created_at": "2024-05-30T12:07:08.104419Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69329297",
"temperature": "27.22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125100/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125100
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T12:16:19.000Z, file: _track.qo, location(gps): 45.4979925,-73.69334766, 24.3C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T12:16:48.875037Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69334766",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125101/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125101
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T12:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.9C/0%RH, voltage: 4.1",
"created_at": "2024-05-30T12:34:15.075584Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125102/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125102
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.495days 2023-07-13T00:48:49Z 20C 68F, 59%RH, now: 2024-05-30T12:42:19Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T12:42:56.186389Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87981796",
"longitude": "-86.08248138",
"temperature": "20.25",
"humidity": "59.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125103/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125103
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 322.965days 2023-07-12T13:44:32Z 22C 72F, 50%RH, now: 2024-05-30T12:53:29Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T12:54:20.193530Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.33",
"humidity": "49.71",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125104/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125104
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T12:55:04.000Z, file: _track.qo, location(gps): 45.4980225,-73.69382422, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T12:55:31.047268Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980225",
"longitude": "-73.69382422",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125105/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125105
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T12:29:46.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/46.3%RH, voltage: 4.25",
"created_at": "2024-05-30T12:57:24.198994Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.54",
"humidity": "46.32",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125106/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125106
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T13:01:32.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T13:02:13.120549Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125107/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125107
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T13:05:47.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20C/60.7%RH, voltage: 5.41",
"created_at": "2024-05-30T13:06:06.951899Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20",
"humidity": "60.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125108/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125108
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T13:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.9C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T13:34:15.316925Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125109/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125109
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.537days 2023-07-13T00:48:49Z 20C 69F, 59%RH, now: 2024-05-30T13:42:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T13:42:56.179681Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88024902",
"longitude": "-86.08329010",
"temperature": "20.29",
"humidity": "58.51",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125110/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125110
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T13:43:32.000Z, file: _track.qo, location(gps): 45.4979475,-73.69328516, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T13:43:58.336568Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69328516",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125111/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125111
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.006days 2023-07-12T13:44:32Z 22C 72F, 48%RH, now: 2024-05-30T13:53:35Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T13:54:27.465503Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.46",
"humidity": "48.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125112/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125112
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T13:14:45.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.8C/46.1%RH, voltage: 4.26",
"created_at": "2024-05-30T13:57:24.555987Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.77",
"humidity": "46.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125113/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125113
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T14:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.9C/0%RH, voltage: 4.22",
"created_at": "2024-05-30T14:02:05.233811Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125114/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125114
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T14:05:55.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20C/59.9%RH, voltage: 5.41",
"created_at": "2024-05-30T14:06:14.938227Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "19.97",
"humidity": "59.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125115/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125115
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T14:31:48.000Z, file: _track.qo, location(gps): 45.4980375,-73.69316797, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T14:32:15.352930Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69316797",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125116/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125116
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T14:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.9C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T14:34:17.829927Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125117/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125117
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.579days 2023-07-13T00:48:49Z 20C 69F, 58%RH, now: 2024-05-30T14:42:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T14:42:55.955672Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88024902",
"longitude": "-86.08329010",
"temperature": "20.34",
"humidity": "57.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125118/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125118
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.048days 2023-07-12T13:44:32Z 23C 73F, 48%RH, now: 2024-05-30T14:53:40Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T14:54:30.856888Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.73",
"humidity": "47.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125119/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125119
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T13:59:45.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/45.3%RH, voltage: 4.26",
"created_at": "2024-05-30T14:57:35.762071Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.88",
"humidity": "45.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125120/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125120
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T14:44:45.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/44.2%RH, voltage: 4.25",
"created_at": "2024-05-30T14:57:35.952194Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.84",
"humidity": "44.21",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125121/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125121
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T15:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T15:02:05.044563Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125122/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125122
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T15:06:03.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20.1C/58.9%RH, voltage: 5.41",
"created_at": "2024-05-30T15:06:22.784877Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.14",
"humidity": "58.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125123/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125123
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T15:19:54.000Z, file: _track.qo, location(gps): 45.4979425,-73.69319922, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T15:20:21.105752Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979425",
"longitude": "-73.69319922",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125124/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125124
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T15:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.8C/0%RH, voltage: 4.1",
"created_at": "2024-05-30T15:34:14.009161Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125125/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125125
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.621days 2023-07-13T00:48:49Z 21C 69F, 56%RH, now: 2024-05-30T15:42:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T15:42:57.350005Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88024902",
"longitude": "-86.08329010",
"temperature": "20.65",
"humidity": "56.21",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125126/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125126
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T15:46:59.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20.4C/57.6%RH, voltage: 5.41",
"created_at": "2024-05-30T15:47:18.088613Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.36",
"humidity": "57.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125127/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125127
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.090days 2023-07-12T13:44:32Z 22C 72F, 49%RH, now: 2024-05-30T15:53:45Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T15:54:35.794918Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.24",
"humidity": "48.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125128/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125128
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T15:29:59.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/43.8%RH, voltage: 4.25",
"created_at": "2024-05-30T15:57:11.585363Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.81",
"humidity": "43.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125129/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125129
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T16:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T16:02:05.752784Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125130/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125130
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T16:08:27.000Z, file: _track.qo, location(gps): 45.4982175,-73.69335547, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T16:08:53.968176Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982175",
"longitude": "-73.69335547",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125131/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125131
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T16:27:44.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20.4C/56.6%RH, voltage: 5.41",
"created_at": "2024-05-30T16:28:04.080012Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.44",
"humidity": "56.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125132/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125132
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T16:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T16:34:16.442891Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125133/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125133
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.662days 2023-07-13T00:48:49Z 21C 69F, 55%RH, now: 2024-05-30T16:42:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T16:42:56.503662Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08244324",
"temperature": "20.82",
"humidity": "55.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125134/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125134
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.131days 2023-07-12T13:44:32Z 22C 72F, 48%RH, now: 2024-05-30T16:53:51Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T16:54:40.953536Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.32",
"humidity": "48.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125135/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125135
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T16:14:58.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/44.3%RH, voltage: 4.26",
"created_at": "2024-05-30T16:57:16.223456Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.81",
"humidity": "44.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125136/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125136
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T16:57:14.000Z, file: _track.qo, location(gps): 45.4979675,-73.69337109, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T16:57:41.488130Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69337109",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125137/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125137
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T17:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 25.1C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T17:02:07.352132Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "25.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125138/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125138
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T17:27:55.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20.5C/54.8%RH, voltage: 5.41",
"created_at": "2024-05-30T17:28:14.706193Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.47",
"humidity": "54.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125139/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125139
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T17:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.1C/0%RH, voltage: 4.1",
"created_at": "2024-05-30T17:34:15.015359Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125140/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125140
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.704days 2023-07-13T00:48:49Z 21C 70F, 54%RH, now: 2024-05-30T17:42:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T17:42:58.386411Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08244324",
"temperature": "20.94",
"humidity": "54.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125141/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125141
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T17:45:37.000Z, file: _track.qo, location(gps): 45.4979825,-73.69316016, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T17:46:10.233889Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69316016",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125142/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125142
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.173days 2023-07-12T13:44:32Z 22C 72F, 54%RH, now: 2024-05-30T17:53:56Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T17:54:46.239918Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.36",
"humidity": "54.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125143/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125143
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T16:59:59.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/44.6%RH, voltage: 4.26",
"created_at": "2024-05-30T17:57:14.013471Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.84",
"humidity": "44.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125144/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125144
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T17:44:58.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/44.6%RH, voltage: 4.25",
"created_at": "2024-05-30T17:57:14.210499Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.86",
"humidity": "44.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125145/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125145
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T18:28:03.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 20.6C/56.7%RH, voltage: 5.41",
"created_at": "2024-05-30T18:28:22.115646Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.64",
"humidity": "56.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125146/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125146
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T18:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.9C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T18:34:14.948178Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125147/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125147
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T18:34:19.000Z, file: _track.qo, location(gps): 45.4980125,-73.69321484, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T18:34:46.669079Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69321484",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125148/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125148
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.746days 2023-07-13T00:48:49Z 21C 70F, 55%RH, now: 2024-05-30T18:42:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T18:43:00.669862Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08244324",
"temperature": "21.09",
"humidity": "55.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125149/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125149
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.215days 2023-07-12T13:44:32Z 22C 72F, 58%RH, now: 2024-05-30T18:54:01Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T18:54:51.289829Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.13",
"humidity": "57.50",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125150/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125150
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T18:29:58.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24C/44.3%RH, voltage: 4.25",
"created_at": "2024-05-30T18:57:13.838513Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.95",
"humidity": "44.3",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125151/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125151
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T18:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T19:02:04.654658Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125152/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125152
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T19:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 25.1C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T19:02:04.856435Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125153/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125153
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T19:22:54.000Z, file: _track.qo, location(gps): 45.4982875,-73.69319141, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T19:23:17.490360Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982875",
"longitude": "-73.69319141",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125154/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125154
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T19:28:11.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 21C/56.8%RH, voltage: 5.41",
"created_at": "2024-05-30T19:28:30.167252Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "20.95",
"humidity": "56.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125155/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125155
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T19:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.3C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T19:34:13.440314Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125156/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125156
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.787days 2023-07-13T00:48:49Z 21C 71F, 55%RH, now: 2024-05-30T19:42:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T19:42:57.882347Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08244324",
"temperature": "21.40",
"humidity": "55.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125157/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125157
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.257days 2023-07-12T13:44:32Z 22C 72F, 56%RH, now: 2024-05-30T19:54:07Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T19:54:56.589810Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.25",
"humidity": "56.00",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125158/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125158
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T19:15:00.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.1C/44%RH, voltage: 4.26",
"created_at": "2024-05-30T19:57:14.818853Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.07",
"humidity": "44.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125159/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125159
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T20:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T20:02:08.230557Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125160/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125160
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T20:11:12.000Z, file: _track.qo, location(gps): 45.4979275,-73.69316797, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T20:11:39.687001Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979275",
"longitude": "-73.69316797",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125161/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125161
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T20:28:19.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 21.2C/56.5%RH, voltage: 5.41",
"created_at": "2024-05-30T20:28:40.110815Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "21.2",
"humidity": "56.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125162/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125162
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T20:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.1C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T20:34:12.917715Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125163/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125163
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.829days 2023-07-13T00:48:49Z 22C 71F, 55%RH, now: 2024-05-30T20:42:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T20:42:58.574578Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08244324",
"temperature": "21.62",
"humidity": "55.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125164/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125164
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.298days 2023-07-12T13:44:32Z 22C 72F, 58%RH, now: 2024-05-30T20:54:12Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T20:55:01.845073Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.12",
"humidity": "58.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125165/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125165
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T19:59:59.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/44.5%RH, voltage: 4.26",
"created_at": "2024-05-30T20:57:15.661125Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.75",
"humidity": "44.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125166/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125166
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T20:44:58.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/44.3%RH, voltage: 4.25",
"created_at": "2024-05-30T20:57:15.848189Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.42",
"humidity": "44.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125167/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125167
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T20:59:50.000Z, file: _track.qo, location(gps): 45.4979875,-73.69327734, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-30T21:00:16.732027Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69327734",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125168/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125168
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T21:01:35.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-30T21:02:06.082976Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125169/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125169
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T21:04:53.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979875,-73.69327734, voltage: 5.12",
"created_at": "2024-05-30T21:05:10.709977Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69327734",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125170/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125170
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T21:04:53.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4978975,-73.69319922, voltage: 5.09",
"created_at": "2024-05-30T21:05:10.846499Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125171/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125171
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T21:04:55.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 24.4C/0%RH, voltage: 5.14",
"created_at": "2024-05-30T21:05:11.066984Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125172/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125172
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T21:04:55.000Z, file: _track.qo, location(gps): 45.4979875,-73.69327734, 25.1C/0%RH, voltage: 5.17",
"created_at": "2024-05-30T21:05:11.107902Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69327734",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125173/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125173
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T21:04:51.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.36",
"created_at": "2024-05-30T21:05:18.937633Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125174/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125174
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T21:04:53.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-05-30T21:05:19.204362Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125175/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125175
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T21:04:54.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/44.5%RH, voltage: 5.35",
"created_at": "2024-05-30T21:05:19.295208Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.41",
"humidity": "44.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125176/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125176
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T21:28:27.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 21.6C/55.9%RH, voltage: 5.41",
"created_at": "2024-05-30T21:28:45.545311Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "21.61",
"humidity": "55.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125177/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125177
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T21:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.2C/0%RH, voltage: 4.1",
"created_at": "2024-05-30T21:34:13.598173Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125178/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125178
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.871days 2023-07-13T00:48:49Z 22C 72F, 56%RH, now: 2024-05-30T21:42:23Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T21:42:58.613505Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08244324",
"temperature": "22.25",
"humidity": "56.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125179/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125179
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T21:46:07.000Z, file: _track.qo, location(gps): 45.4978975,-73.69319922, 25.9C/0%RH, voltage: 5.2",
"created_at": "2024-05-30T21:46:25.285380Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69319922",
"temperature": "25.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125180/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125180
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T21:48:28.000Z, file: _track.qo, location(gps): 45.4978325,-73.69332422, 25.9C/0%RH, voltage: 5.12",
"created_at": "2024-05-30T21:48:51.814817Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978325",
"longitude": "-73.69332422",
"temperature": "25.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125181/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125181
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.340days 2023-07-12T13:44:32Z 23C 73F, 49%RH, now: 2024-05-30T21:54:17Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T21:55:06.920766Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.64",
"humidity": "48.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125182/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125182
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T21:29:57.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/44.2%RH, voltage: 5.39",
"created_at": "2024-05-30T21:57:14.827187Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.91",
"humidity": "44.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125183/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125183
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T21:59:57.000Z, file: _track.qo, location(gps): 45.4979875,-73.69327734, 26.4C/0%RH, voltage: 5.25",
"created_at": "2024-05-30T22:00:16.783530Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69327734",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125184/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125184
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T22:01:32.000Z, file: _track.qo, location(gps): 45.4980375,-73.69308984, 29.8C/0%RH, voltage: 5.18",
"created_at": "2024-05-30T22:01:58.878360Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69308984",
"temperature": "29.8",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125185/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125185
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-30T22:20:36.000Z, file: _track.qo, location(gps): 45.4978325,-73.69332422, 25.9C/0%RH, voltage: 5.21",
"created_at": "2024-05-30T22:20:52.829539Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978325",
"longitude": "-73.69332422",
"temperature": "25.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125186/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125186
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T22:28:35.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 22.1C/57.6%RH, voltage: 5.42",
"created_at": "2024-05-30T22:28:54.015097Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "22.11",
"humidity": "57.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125187/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125187
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-30T22:33:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.4C/0%RH, voltage: 4.09",
"created_at": "2024-05-30T22:34:13.312124Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125188/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125188
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T22:39:39.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 22.2C/57.7%RH, voltage: 5.41",
"created_at": "2024-05-30T22:39:59.977751Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "22.22",
"humidity": "57.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125189/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125189
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 322.912days 2023-07-13T00:48:49Z 23C 73F, 57%RH, now: 2024-05-30T22:42:23Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-30T22:42:59.211050Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87953568",
"longitude": "-86.08287811",
"temperature": "22.69",
"humidity": "56.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125190/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125190
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 323.382days 2023-07-12T13:44:32Z 22C 72F, 57%RH, now: 2024-05-30T22:54:23Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-30T22:55:13.620707Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "22.48",
"humidity": "57.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125191/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125191
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-30T22:14:57.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.1C/43.5%RH, voltage: 5.39",
"created_at": "2024-05-30T22:57:15.768541Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.07",
"humidity": "43.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125192/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125192
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T23:01:41.000Z, file: _track.qo, location(gps): 45.4980375,-73.69308984, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-30T23:02:00.357692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69308984",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125193/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125193
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-30T23:02:41.000Z, file: _track.qo, location(gps): 45.4978675,-73.69330078, 28.8C/0%RH, voltage: 5.18",
"created_at": "2024-05-30T23:03:06.904875Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978675",
"longitude": "-73.69330078",
"temperature": "28.83",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125194/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125194
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-30T23:09:10.000Z, file: _track.qo, where_when: 2024-05-28T23:09:17.000Z, location(gps): 39.8798775,-86.08250391, 22.3C/58.2%RH, voltage: 5.42",
"created_at": "2024-05-30T23:09:28.087005Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798775",
"longitude": "-86.08250391",
"temperature": "22.34",
"humidity": "58.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/125195/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 125195
}
]
}