HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 142029,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=554",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=552",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T00:21:55.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-05-28T00:22:22.502240Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124596/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124596
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T00:21:56.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/53%RH, voltage: 5.34",
"created_at": "2024-05-28T00:22:22.591920Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.88",
"humidity": "53.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124597/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124597
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T00:22:02.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980625,-73.69341797, voltage: 5.11",
"created_at": "2024-05-28T00:22:22.604477Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69341797",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124598/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124598
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T00:22:04.000Z, file: _track.qo, location(gps): 45.4980625,-73.69341797, 25.8C/0%RH, voltage: 5.16",
"created_at": "2024-05-28T00:22:22.964587Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69341797",
"temperature": "25.8",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124599/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124599
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T00:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20C/0%RH, voltage: 4.12",
"created_at": "2024-05-28T00:34:06.165417Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124600/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124600
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 319.995days 2023-07-13T00:48:49Z 23C 74F, 61%RH, now: 2024-05-28T00:41:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T00:42:29.798740Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "23.37",
"humidity": "60.74",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124601/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124601
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T00:47:05.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 27C/0%RH, voltage: 5.12",
"created_at": "2024-05-28T00:47:32.498104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124602/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124602
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.461days 2023-07-12T13:44:32Z 24C 75F, 50%RH, now: 2024-05-28T00:48:33Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T00:49:09.203033Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "23.88",
"humidity": "50.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124603/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124603
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T00:29:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.3C/53.3%RH, voltage: 5.38",
"created_at": "2024-05-28T00:57:16.569909Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.27",
"humidity": "53.32",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124604/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124604
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T01:13:55.000Z, file: _track.qo, location(gps): 45.4980625,-73.69341797, 27.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-28T01:14:11.736255Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69341797",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124605/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124605
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T01:15:12.000Z, file: _track.qo, location(gps): 45.4980425,-73.69330078, 30.3C/0%RH, voltage: 5.18",
"created_at": "2024-05-28T01:16:07.955178Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980425",
"longitude": "-73.69330078",
"temperature": "30.33",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124606/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124606
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T01:21:33.000Z, file: _track.qo, where_when: 2024-05-28T00:21:25.000Z, location(gps): 39.8798075,-86.08223828, 22.8C/61.5%RH, voltage: 5.41",
"created_at": "2024-05-28T01:21:39.038141Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "22.8",
"humidity": "61.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124607/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124607
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T01:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.8C/0%RH, voltage: 4.12",
"created_at": "2024-05-28T01:34:04.354154Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124608/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124608
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.037days 2023-07-13T00:48:49Z 23C 74F, 60%RH, now: 2024-05-28T01:41:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T01:42:32.028339Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "23.27",
"humidity": "60.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124609/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124609
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T01:47:13.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 27.1C/0%RH, voltage: 5.2",
"created_at": "2024-05-28T01:47:34.663912Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "27.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124610/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124610
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.503days 2023-07-12T13:44:32Z 24C 75F, 49%RH, now: 2024-05-28T01:48:38Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T01:49:16.112123Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.04",
"humidity": "48.80",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124611/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124611
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T01:14:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.9C/52%RH, voltage: 5.39",
"created_at": "2024-05-28T01:57:18.666365Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.91",
"humidity": "51.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124612/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124612
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T02:15:19.000Z, file: _track.qo, location(gps): 45.4980425,-73.69330078, 27.1C/0%RH, voltage: 5.26",
"created_at": "2024-05-28T02:15:43.202975Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980425",
"longitude": "-73.69330078",
"temperature": "27.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124613/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124613
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T02:17:08.000Z, file: _track.qo, location(gps): 45.4980475,-73.69351953, 31C/0%RH, voltage: 5.18",
"created_at": "2024-05-28T02:17:33.812181Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69351953",
"temperature": "30.98",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124614/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124614
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T02:21:41.000Z, file: _track.qo, where_when: 2024-05-28T01:21:33.000Z, location(gps): 39.8798075,-86.08223828, 22.8C/62.2%RH, voltage: 5.42",
"created_at": "2024-05-28T02:21:46.572854Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "22.75",
"humidity": "62.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124615/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124615
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T02:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.8C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T02:34:04.950237Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124616/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124616
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.078days 2023-07-13T00:48:49Z 23C 74F, 60%RH, now: 2024-05-28T02:41:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T02:42:41.334108Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "23.10",
"humidity": "60.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124617/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124617
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T02:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 27.2C/0%RH, voltage: 5.21",
"created_at": "2024-05-28T02:47:42.333546Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "27.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124618/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124618
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.545days 2023-07-12T13:44:32Z 24C 75F, 57%RH, now: 2024-05-28T02:48:44Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T02:49:21.779436Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.04",
"humidity": "56.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124619/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124619
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T01:59:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 25C/52.1%RH, voltage: 5.38",
"created_at": "2024-05-28T02:57:17.940513Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "25.05",
"humidity": "52.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124620/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124620
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T02:44:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 25.2C/51.9%RH, voltage: 5.39",
"created_at": "2024-05-28T02:57:18.158073Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "25.19",
"humidity": "51.9",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124621/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124621
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T03:06:44.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4980475,-73.69351953, voltage: 4.21",
"created_at": "2024-05-28T03:07:05.783560Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69351953",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124622/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124622
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T03:06:46.000Z, file: _track.qo, location(gps): 45.4980475,-73.69351953, 27.4C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T03:07:06.084261Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69351953",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124623/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124623
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T03:06:37.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979675,-73.69330859, voltage: 4.19",
"created_at": "2024-05-28T03:07:29.381318Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124624/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124624
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T03:06:39.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 27.6C/0%RH, voltage: 4.2",
"created_at": "2024-05-28T03:07:29.582837Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "27.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124625/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124625
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T03:06:36.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.26",
"created_at": "2024-05-28T03:07:30.850938Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124626/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124626
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T03:06:38.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.25",
"created_at": "2024-05-28T03:07:31.323665Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124627/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124627
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T03:06:39.000Z, file: _track.qo, where_when: , location(tower): 45.4938875,-73.69292188, 25.3C/51.8%RH, voltage: 4.25",
"created_at": "2024-05-28T03:07:31.677631Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "25.3",
"humidity": "51.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124628/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124628
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T03:08:43.000Z, file: _track.qo, location(gps): 45.4981075,-73.69333984, 29.2C/0%RH, voltage: 4.17",
"created_at": "2024-05-28T03:09:06.871327Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981075",
"longitude": "-73.69333984",
"temperature": "29.16",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124629/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124629
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T03:21:49.000Z, file: _track.qo, where_when: 2024-05-28T02:21:41.000Z, location(gps): 39.8798075,-86.08223828, 22.5C/62.3%RH, voltage: 5.41",
"created_at": "2024-05-28T03:21:56.564430Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "22.53",
"humidity": "62.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124630/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124630
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T03:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.5C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T03:34:04.618912Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124631/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124631
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.120days 2023-07-13T00:48:49Z 23C 73F, 62%RH, now: 2024-05-28T03:41:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T03:42:35.156045Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "22.81",
"humidity": "61.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124632/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124632
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T03:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T03:47:56.500700Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124633/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124633
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.586days 2023-07-12T13:44:32Z 24C 76F, 49%RH, now: 2024-05-28T03:48:49Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T03:49:24.625100Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.21",
"humidity": "49.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124634/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124634
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T03:56:54.000Z, file: _track.qo, location(gps): 45.4978575,-73.69311328, 26C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T03:57:20.716253Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978575",
"longitude": "-73.69311328",
"temperature": "25.98",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124635/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124635
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T03:29:28.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.9C/52.3%RH, voltage: 4.27",
"created_at": "2024-05-28T03:57:21.299072Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.86",
"humidity": "52.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124636/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124636
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T04:21:57.000Z, file: _track.qo, where_when: 2024-05-28T03:21:49.000Z, location(gps): 39.8798075,-86.08223828, 22.3C/61.9%RH, voltage: 5.42",
"created_at": "2024-05-28T04:22:03.944066Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "22.31",
"humidity": "61.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124637/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124637
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T04:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.1C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T04:34:04.838933Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124638/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124638
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.162days 2023-07-13T00:48:49Z 22C 72F, 61%RH, now: 2024-05-28T04:41:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T04:42:32.489510Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "22.40",
"humidity": "60.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124639/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124639
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T04:45:29.000Z, file: _track.qo, location(gps): 45.4979775,-73.69326172, 25.7C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T04:45:55.884105Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979775",
"longitude": "-73.69326172",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124640/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124640
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T04:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T04:47:55.476658Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124641/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124641
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.628days 2023-07-12T13:44:32Z 25C 77F, 52%RH, now: 2024-05-28T04:48:54Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T04:49:30.132766Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.85",
"humidity": "51.80",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124642/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124642
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T04:14:27.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.5C/52.7%RH, voltage: 4.27",
"created_at": "2024-05-28T04:57:20.005520Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.45",
"humidity": "52.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124643/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124643
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T05:22:05.000Z, file: _track.qo, where_when: 2024-05-28T04:21:57.000Z, location(gps): 39.8798075,-86.08223828, 22C/61.1%RH, voltage: 5.42",
"created_at": "2024-05-28T05:22:10.667005Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "22",
"humidity": "61.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124644/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124644
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T05:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.4C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T05:34:05.349674Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124645/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124645
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T05:33:51.000Z, file: _track.qo, location(gps): 45.4978875,-73.69328516, 25.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T05:34:14.190654Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978875",
"longitude": "-73.69328516",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124646/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124646
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.203days 2023-07-13T00:48:49Z 22C 72F, 59%RH, now: 2024-05-28T05:41:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T05:42:32.737810Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "22.30",
"humidity": "58.90",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124647/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124647
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T05:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T05:47:55.941950Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124648/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124648
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.670days 2023-07-12T13:44:32Z 24C 75F, 50%RH, now: 2024-05-28T05:48:59Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T05:49:36.306114Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.10",
"humidity": "49.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124649/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124649
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T04:59:27.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.3C/52.9%RH, voltage: 4.26",
"created_at": "2024-05-28T05:57:20.639560Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.27",
"humidity": "52.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124650/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124650
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T05:44:27.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.1C/53%RH, voltage: 4.26",
"created_at": "2024-05-28T05:57:20.818224Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.14",
"humidity": "52.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124651/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124651
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T06:22:13.000Z, file: _track.qo, where_when: 2024-05-28T05:22:05.000Z, location(gps): 39.8798075,-86.08223828, 21.8C/60.7%RH, voltage: 5.42",
"created_at": "2024-05-28T06:22:18.384461Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "21.81",
"humidity": "60.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124652/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124652
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T06:22:28.000Z, file: _track.qo, location(gps): 45.4981025,-73.69326172, 25.7C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T06:22:52.604202Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981025",
"longitude": "-73.69326172",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124653/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124653
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T06:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.4C/0%RH, voltage: 4.12",
"created_at": "2024-05-28T06:34:04.206515Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124654/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124654
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.245days 2023-07-13T00:48:49Z 22C 72F, 60%RH, now: 2024-05-28T06:41:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T06:42:33.485143Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "21.99",
"humidity": "59.87",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124655/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124655
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T06:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T06:47:55.619904Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124656/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124656
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.711days 2023-07-12T13:44:32Z 24C 76F, 56%RH, now: 2024-05-28T06:49:05Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T06:49:40.122282Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.42",
"humidity": "55.70",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124657/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124657
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T06:29:27.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.1C/53.1%RH, voltage: 4.26",
"created_at": "2024-05-28T06:57:21.374685Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.07",
"humidity": "53.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124658/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124658
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T07:10:43.000Z, file: _track.qo, location(gps): 45.4978825,-73.69327734, 25.5C/0%RH, voltage: 4.2",
"created_at": "2024-05-28T07:11:09.416694Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978825",
"longitude": "-73.69327734",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124659/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124659
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T07:22:21.000Z, file: _track.qo, where_when: 2024-05-28T06:22:13.000Z, location(gps): 39.8798075,-86.08223828, 21.5C/61.5%RH, voltage: 5.41",
"created_at": "2024-05-28T07:22:26.082648Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "21.55",
"humidity": "61.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124660/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124660
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T07:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.2C/0%RH, voltage: 4.12",
"created_at": "2024-05-28T07:34:04.545246Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124661/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124661
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.287days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-28T07:41:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T07:42:32.988071Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "21.76",
"humidity": "60.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124662/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124662
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T07:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T07:47:55.050251Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124663/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124663
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.753days 2023-07-12T13:44:32Z 24C 76F, 49%RH, now: 2024-05-28T07:49:10Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T07:49:45.481931Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.27",
"humidity": "49.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124664/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124664
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T07:14:27.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24C/53.2%RH, voltage: 4.27",
"created_at": "2024-05-28T07:57:21.610672Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.99",
"humidity": "53.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124665/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124665
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T07:59:18.000Z, file: _track.qo, location(gps): 45.4976625,-73.69318359, 25.3C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T07:59:44.832261Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4976625",
"longitude": "-73.69318359",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124666/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124666
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T08:22:29.000Z, file: _track.qo, where_when: 2024-05-28T07:22:21.000Z, location(gps): 39.8798075,-86.08223828, 21.4C/61.6%RH, voltage: 5.42",
"created_at": "2024-05-28T08:22:34.243538Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "21.36",
"humidity": "61.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124667/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124667
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T08:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19C/0%RH, voltage: 4.12",
"created_at": "2024-05-28T08:34:07.484889Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124668/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124668
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.328days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-28T08:41:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T08:42:34.434983Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "21.59",
"humidity": "60.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124669/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124669
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T08:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T08:47:59.256569Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124670/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124670
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T08:47:45.000Z, file: _track.qo, location(gps): 45.4980975,-73.69326172, 25.3C/0%RH, voltage: 4.21",
"created_at": "2024-05-28T08:48:11.582747Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980975",
"longitude": "-73.69326172",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124671/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124671
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.795days 2023-07-12T13:44:32Z 24C 75F, 49%RH, now: 2024-05-28T08:49:15Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T08:49:50.547464Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.10",
"humidity": "48.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124672/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124672
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T07:59:27.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.9C/53.5%RH, voltage: 4.26",
"created_at": "2024-05-28T08:57:22.378861Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.93",
"humidity": "53.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124673/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124673
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T08:44:27.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.9C/53.4%RH, voltage: 4.26",
"created_at": "2024-05-28T08:57:22.577891Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.89",
"humidity": "53.4",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124674/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124674
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T09:22:37.000Z, file: _track.qo, where_when: 2024-05-28T08:22:29.000Z, location(gps): 39.8798075,-86.08223828, 21.2C/62.2%RH, voltage: 5.42",
"created_at": "2024-05-28T09:22:42.914217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "21.16",
"humidity": "62.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124675/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124675
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T09:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.9C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T09:34:05.427270Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124676/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124676
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T09:36:41.000Z, file: _track.qo, location(gps): 45.4979975,-73.69294922, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-28T09:37:07.834405Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69294922",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124677/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124677
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T09:38:02.000Z, file: _track.qo, location(gps): 45.4981025,-73.69329297, 28.4C/0%RH, voltage: 4.18",
"created_at": "2024-05-28T09:38:25.207039Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981025",
"longitude": "-73.69329297",
"temperature": "28.39",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124678/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124678
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.370days 2023-07-13T00:48:49Z 21C 70F, 61%RH, now: 2024-05-28T09:41:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T09:42:33.889662Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "21.35",
"humidity": "60.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124679/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124679
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T09:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T09:47:57.084235Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124680/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124680
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.837days 2023-07-12T13:44:32Z 24C 76F, 54%RH, now: 2024-05-28T09:49:21Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T09:49:55.713377Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.32",
"humidity": "54.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124681/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124681
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T09:29:26.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/53.5%RH, voltage: 4.26",
"created_at": "2024-05-28T09:57:22.860225Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.82",
"humidity": "53.54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124682/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124682
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T10:22:45.000Z, file: _track.qo, where_when: 2024-05-28T09:22:37.000Z, location(gps): 39.8798075,-86.08223828, 20.9C/62.3%RH, voltage: 5.41",
"created_at": "2024-05-28T10:22:49.678831Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "20.89",
"humidity": "62.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124683/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124683
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T10:26:44.000Z, file: _track.qo, location(gps): 45.4980275,-73.69323047, 25.5C/0%RH, voltage: 4.2",
"created_at": "2024-05-28T10:27:07.546869Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980275",
"longitude": "-73.69323047",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124684/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124684
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T10:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.9C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T10:34:04.159450Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124685/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124685
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.412days 2023-07-13T00:48:49Z 21C 70F, 62%RH, now: 2024-05-28T10:41:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T10:42:34.355329Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "21.10",
"humidity": "61.70",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124686/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124686
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T10:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.1C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T10:47:54.913118Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124687/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124687
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.878days 2023-07-12T13:44:32Z 24C 75F, 49%RH, now: 2024-05-28T10:49:26Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T10:50:00.881265Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.05",
"humidity": "49.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124688/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124688
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-28T10:14:27.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24C/53.2%RH, voltage: 4.27",
"created_at": "2024-05-28T10:57:23.201054Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.02",
"humidity": "53.23",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124689/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124689
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-28T11:15:07.000Z, file: _track.qo, location(gps): 45.4980675,-73.69320703, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-28T11:15:30.925607Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69320703",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124690/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124690
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-28T11:22:53.000Z, file: _track.qo, where_when: 2024-05-28T10:22:45.000Z, location(gps): 39.8798075,-86.08223828, 20.7C/63.8%RH, voltage: 5.41",
"created_at": "2024-05-28T11:22:57.787235Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08223828",
"temperature": "20.69",
"humidity": "63.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124691/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124691
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-28T11:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 18.8C/0%RH, voltage: 4.11",
"created_at": "2024-05-28T11:34:04.141861Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "18.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124692/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124692
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 320.453days 2023-07-13T00:48:49Z 21C 70F, 63%RH, now: 2024-05-28T11:41:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-28T11:42:35.651262Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000870",
"longitude": "-86.08250427",
"temperature": "20.98",
"humidity": "63.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124693/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124693
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-28T11:47:21.000Z, file: _track.qo, location(gps): 45.4979675,-73.69330859, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-28T11:47:54.578763Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69330859",
"temperature": "25.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124694/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124694
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 320.920days 2023-07-12T13:44:32Z 24C 76F, 48%RH, now: 2024-05-28T11:49:31Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-28T11:50:06.120999Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "24.33",
"humidity": "47.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/124695/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 124695
}
]
}