HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 141972,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=543",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=541",
"results": [
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.453days 2023-07-13T00:48:49Z 25C 77F, 57%RH, now: 2024-05-22T11:41:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T11:41:33.113558Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88043594",
"longitude": "-86.08245850",
"temperature": "24.89",
"humidity": "57.15",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123495/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123495
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T11:45:57.000Z, file: _track.qo, where_when: 2024-05-22T10:45:49.000Z, location(gps): 39.8801025,-86.08209766, 24.6C/59.6%RH, voltage: 5.42",
"created_at": "2024-05-22T11:46:19.433514Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8801025",
"longitude": "-86.08209766",
"temperature": "24.56",
"humidity": "59.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123496/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123496
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T11:55:42.000Z, file: _track.qo, location(gps): 45.4979825,-73.69323047, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T11:56:03.840545Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69323047",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123497/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123497
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T10:58:30.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24C/54.1%RH, voltage: 4.26",
"created_at": "2024-05-22T11:57:20.682033Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24",
"humidity": "54.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123498/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123498
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T11:43:30.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/53.4%RH, voltage: 4.25",
"created_at": "2024-05-22T11:57:21.064149Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.17",
"humidity": "53.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123499/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123499
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T12:16:29.000Z, file: _track.qo, location(gps): 45.4980175,-73.69323047, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T12:17:09.521121Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980175",
"longitude": "-73.69323047",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123500/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123500
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T12:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.1C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T12:34:13.313756Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123501/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123501
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 314.953days 2023-07-12T13:44:32Z 22C 72F, 63%RH, now: 2024-05-22T12:36:51Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T12:37:44.382958Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "22.29",
"humidity": "63.11",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123502/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123502
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T12:37:45.000Z, file: _track.qo, where_when: 2024-05-22T11:45:57.000Z, location(gps): 39.8801025,-86.08209766, 24.5C/59.4%RH, voltage: 5.42",
"created_at": "2024-05-22T12:38:07.227098Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8801025",
"longitude": "-86.08209766",
"temperature": "24.55",
"humidity": "59.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123503/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123503
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T12:39:21.000Z, file: _track.qo, where_when: 2024-05-22T12:39:21.000Z, location(gps): 39.8799975,-86.08239453, 24.5C/59.4%RH, voltage: 5.36",
"created_at": "2024-05-22T12:39:56.950743Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08239453",
"temperature": "24.55",
"humidity": "59.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123504/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123504
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.495days 2023-07-13T00:48:49Z 25C 77F, 57%RH, now: 2024-05-22T12:41:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T12:41:34.651891Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.93",
"humidity": "57.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123505/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123505
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T12:44:06.000Z, file: _track.qo, location(gps): 45.4979525,-73.69329297, 25.1C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T12:44:29.189931Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69329297",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123506/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123506
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T12:28:30.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/52.8%RH, voltage: 4.26",
"created_at": "2024-05-22T12:57:19.298463Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.93",
"humidity": "52.8",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123507/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123507
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T13:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T13:17:08.258752Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123508/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123508
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T13:32:35.000Z, file: _track.qo, location(gps): 45.4979975,-73.69338672, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T13:32:57.155393Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69338672",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123509/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123509
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T13:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.1C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T13:34:12.494811Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123510/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123510
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 314.995days 2023-07-12T13:44:32Z 22C 71F, 65%RH, now: 2024-05-22T13:36:56Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T13:37:49.621500Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.90",
"humidity": "65.33",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123511/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123511
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T13:39:29.000Z, file: _track.qo, where_when: 2024-05-22T12:39:21.000Z, location(gps): 39.8799975,-86.08239453, 24.4C/58.5%RH, voltage: 5.42",
"created_at": "2024-05-22T13:39:51.960300Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08239453",
"temperature": "24.41",
"humidity": "58.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123512/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123512
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.536days 2023-07-13T00:48:49Z 25C 77F, 57%RH, now: 2024-05-22T13:41:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T13:41:35.433343Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.79",
"humidity": "57.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123513/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123513
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T13:13:30.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/51.6%RH, voltage: 4.26",
"created_at": "2024-05-22T13:57:20.414293Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.55",
"humidity": "51.6",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123514/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123514
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T14:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T14:17:08.237350Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123515/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123515
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T14:21:00.000Z, file: _track.qo, location(gps): 45.4980925,-73.69324609, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T14:21:21.979690Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980925",
"longitude": "-73.69324609",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123516/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123516
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T14:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.3C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T14:34:13.478962Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123517/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123517
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.036days 2023-07-12T13:44:32Z 22C 71F, 66%RH, now: 2024-05-22T14:37:01Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T14:37:54.906254Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.89",
"humidity": "66.40",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123518/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123518
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T14:39:37.000Z, file: _track.qo, where_when: 2024-05-22T13:39:29.000Z, location(gps): 39.8799975,-86.08239453, 24.5C/59.4%RH, voltage: 5.42",
"created_at": "2024-05-22T14:39:59.054951Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08239453",
"temperature": "24.5",
"humidity": "59.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123519/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123519
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.578days 2023-07-13T00:48:49Z 25C 77F, 57%RH, now: 2024-05-22T14:41:01Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T14:41:37.500972Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.90",
"humidity": "57.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123520/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123520
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T13:58:29.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/51.5%RH, voltage: 4.25",
"created_at": "2024-05-22T14:57:31.004088Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.48",
"humidity": "51.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123521/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123521
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T14:43:29.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.3C/51.3%RH, voltage: 4.25",
"created_at": "2024-05-22T14:57:31.183319Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.34",
"humidity": "51.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123522/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123522
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T15:09:14.000Z, file: _track.qo, location(gps): 45.4980025,-73.69324609, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T15:09:35.841082Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69324609",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123523/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123523
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T15:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T15:17:08.008815Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123524/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123524
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T15:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.2C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T15:34:13.159611Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123525/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123525
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T15:36:40.000Z, file: _track.qo, where_when: 2024-05-22T15:36:39.000Z, location(gps): 39.8800075,-86.08212891, 24.5C/58.3%RH, voltage: 5.36",
"created_at": "2024-05-22T15:37:16.011568Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800075",
"longitude": "-86.08212891",
"temperature": "24.55",
"humidity": "58.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123526/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123526
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.078days 2023-07-12T13:44:32Z 22C 71F, 66%RH, now: 2024-05-22T15:37:07Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T15:37:59.881116Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.76",
"humidity": "65.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123527/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123527
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T15:38:15.000Z, file: _track.qo, where_when: 2024-05-22T15:38:15.000Z, location(gps): 39.8799925,-86.08255859, 24.5C/58.3%RH, voltage: 5.36",
"created_at": "2024-05-22T15:38:50.053405Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.55",
"humidity": "58.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123528/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123528
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.620days 2023-07-13T00:48:49Z 25C 77F, 57%RH, now: 2024-05-22T15:41:01Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T15:41:39.619006Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.96",
"humidity": "56.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123529/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123529
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T15:28:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.3C/51.7%RH, voltage: 4.25",
"created_at": "2024-05-22T15:57:13.812068Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.3",
"humidity": "51.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123530/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123530
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T15:57:36.000Z, file: _track.qo, location(gps): 45.4979275,-73.69327734, 24.8C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T15:57:59.514244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979275",
"longitude": "-73.69327734",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123531/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123531
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T16:16:29.000Z, file: _track.qo, location(tower): 45.4947625,-73.69164062, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T16:17:07.814451Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123532/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123532
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T16:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.4C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T16:34:17.740488Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123533/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123533
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.120days 2023-07-12T13:44:32Z 22C 71F, 63%RH, now: 2024-05-22T16:37:12Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T16:38:05.413928Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.58",
"humidity": "62.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123534/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123534
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T16:38:25.000Z, file: _track.qo, where_when: 2024-05-22T15:38:15.000Z, location(gps): 39.8799925,-86.08255859, 24.6C/57.5%RH, voltage: 5.42",
"created_at": "2024-05-22T16:38:48.881294Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.58",
"humidity": "57.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123535/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123535
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.661days 2023-07-13T00:48:49Z 25C 77F, 56%RH, now: 2024-05-22T16:41:01Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T16:41:35.261971Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "25.02",
"humidity": "56.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123536/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123536
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T16:46:06.000Z, file: _track.qo, location(gps): 45.4978175,-73.69344141, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T16:46:28.273407Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978175",
"longitude": "-73.69344141",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123537/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123537
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T16:13:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/52.3%RH, voltage: 4.26",
"created_at": "2024-05-22T16:57:12.271383Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.42",
"humidity": "52.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123538/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123538
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T17:16:29.000Z, file: _track.qo, location(tower): 45.4947625,-73.69164062, 24.7C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T17:17:08.223763Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123539/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123539
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T17:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.6C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T17:34:11.618084Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123540/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123540
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T17:34:38.000Z, file: _track.qo, location(gps): 45.4980175,-73.69328516, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T17:35:00.303909Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980175",
"longitude": "-73.69328516",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123541/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123541
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.162days 2023-07-12T13:44:32Z 21C 70F, 61%RH, now: 2024-05-22T17:37:17Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T17:38:10.377236Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.20",
"humidity": "60.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123542/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123542
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T17:38:33.000Z, file: _track.qo, where_when: 2024-05-22T16:38:25.000Z, location(gps): 39.8799925,-86.08255859, 24.7C/55.7%RH, voltage: 5.42",
"created_at": "2024-05-22T17:38:55.143384Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.66",
"humidity": "55.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123543/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123543
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.703days 2023-07-13T00:48:49Z 25C 77F, 55%RH, now: 2024-05-22T17:41:02Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T17:41:36.629129Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.94",
"humidity": "54.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123544/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123544
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T16:58:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/52.6%RH, voltage: 4.25",
"created_at": "2024-05-22T17:57:14.813480Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.43",
"humidity": "52.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123545/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123545
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T17:43:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.2C/51.9%RH, voltage: 4.25",
"created_at": "2024-05-22T17:57:15.012474Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.21",
"humidity": "51.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123546/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123546
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T18:16:29.000Z, file: _track.qo, location(tower): 45.4947625,-73.69164062, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T18:17:08.624592Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123547/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123547
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T18:23:05.000Z, file: _track.qo, location(gps): 45.4979275,-73.69329297, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T18:23:26.579979Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979275",
"longitude": "-73.69329297",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123548/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123548
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T18:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.5C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T18:34:13.551994Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123549/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123549
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.203days 2023-07-12T13:44:32Z 22C 71F, 59%RH, now: 2024-05-22T18:37:23Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T18:38:15.740014Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.60",
"humidity": "59.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123550/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123550
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T18:38:41.000Z, file: _track.qo, where_when: 2024-05-22T17:38:33.000Z, location(gps): 39.8799925,-86.08255859, 24.6C/53.9%RH, voltage: 5.42",
"created_at": "2024-05-22T18:39:03.195419Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.62",
"humidity": "53.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123551/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123551
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.745days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-05-22T18:41:02Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T18:41:38.100712Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.92",
"humidity": "54.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123552/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123552
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T18:28:38.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.2C/51.4%RH, voltage: 4.25",
"created_at": "2024-05-22T18:57:15.002589Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.19",
"humidity": "51.4",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123553/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123553
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T19:11:35.000Z, file: _track.qo, location(gps): 45.4978475,-73.69325391, 24.8C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T19:11:56.957711Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978475",
"longitude": "-73.69325391",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123554/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123554
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T19:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.7C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T19:17:10.679099Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123555/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123555
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T19:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.4C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T19:34:14.646501Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123556/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123556
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.245days 2023-07-12T13:44:32Z 21C 70F, 60%RH, now: 2024-05-22T19:37:28Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T19:38:20.833397Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "21.09",
"humidity": "60.20",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123557/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123557
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T19:38:49.000Z, file: _track.qo, where_when: 2024-05-22T18:38:41.000Z, location(gps): 39.8799925,-86.08255859, 24.6C/53.5%RH, voltage: 5.42",
"created_at": "2024-05-22T19:39:12.554883Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.62",
"humidity": "53.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123558/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123558
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.786days 2023-07-13T00:48:49Z 25C 77F, 53%RH, now: 2024-05-22T19:41:02Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T19:41:37.756198Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "24.90",
"humidity": "53.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123559/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123559
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T19:13:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/51%RH, voltage: 4.25",
"created_at": "2024-05-22T19:57:20.716993Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.14",
"humidity": "50.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123560/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123560
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T20:00:10.000Z, file: _track.qo, location(gps): 45.4977425,-73.69326953, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T20:00:33.051542Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977425",
"longitude": "-73.69326953",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123561/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123561
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T20:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.8C/0%RH, voltage: 4.24",
"created_at": "2024-05-22T20:17:08.752547Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123562/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123562
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T20:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.1C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T20:34:12.484223Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123563/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123563
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.287days 2023-07-12T13:44:32Z 21C 69F, 58%RH, now: 2024-05-22T20:37:33Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T20:38:34.969732Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "20.57",
"humidity": "58.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123564/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123564
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T20:38:57.000Z, file: _track.qo, where_when: 2024-05-22T19:38:49.000Z, location(gps): 39.8799925,-86.08255859, 24.9C/50.7%RH, voltage: 5.42",
"created_at": "2024-05-22T20:39:18.731171Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "24.88",
"humidity": "50.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123565/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123565
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.828days 2023-07-13T00:48:49Z 25C 77F, 51%RH, now: 2024-05-22T20:41:03Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T20:41:37.880738Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "25.10",
"humidity": "50.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123566/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123566
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T20:48:21.000Z, file: _track.qo, location(gps): 45.4977875,-73.69330078, 24.8C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T20:48:43.413630Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977875",
"longitude": "-73.69330078",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123567/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123567
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T19:58:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/50.7%RH, voltage: 4.25",
"created_at": "2024-05-22T20:57:21.337591Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.08",
"humidity": "50.7",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123568/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123568
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T20:43:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/50.3%RH, voltage: 4.25",
"created_at": "2024-05-22T20:57:21.540190Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.07",
"humidity": "50.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123569/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123569
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T21:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T21:17:07.417158Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123570/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123570
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T21:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.6C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T21:34:11.567354Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123571/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123571
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T21:36:55.000Z, file: _track.qo, location(gps): 45.4979475,-73.69327734, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-22T21:37:16.578927Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69327734",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123572/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123572
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.329days 2023-07-12T13:44:32Z 21C 69F, 61%RH, now: 2024-05-22T21:37:38Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T21:38:31.231572Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "20.66",
"humidity": "60.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123573/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123573
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T21:39:05.000Z, file: _track.qo, where_when: 2024-05-22T20:38:57.000Z, location(gps): 39.8799925,-86.08255859, 25.1C/52.9%RH, voltage: 5.42",
"created_at": "2024-05-22T21:39:26.399277Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "25.06",
"humidity": "52.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123574/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123574
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.870days 2023-07-13T00:48:49Z 25C 78F, 53%RH, now: 2024-05-22T21:41:03Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T21:41:38.340129Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "25.28",
"humidity": "52.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123575/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123575
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T21:28:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/50.4%RH, voltage: 4.25",
"created_at": "2024-05-22T21:57:22.570086Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.1",
"humidity": "50.37",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123576/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123576
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T22:16:29.000Z, file: _track.qo, location(tower): 45.4984625,-73.70301562, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T22:17:10.495927Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123577/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123577
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T22:25:34.000Z, file: _track.qo, location(gps): 45.4980675,-73.69330859, 25C/0%RH, voltage: 4.19",
"created_at": "2024-05-22T22:25:58.350871Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69330859",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123578/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123578
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T22:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.8C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T22:34:18.652624Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123579/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123579
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.370days 2023-07-12T13:44:32Z 21C 69F, 63%RH, now: 2024-05-22T22:37:44Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T22:38:38.727983Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "20.78",
"humidity": "62.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123580/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123580
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T22:39:13.000Z, file: _track.qo, where_when: 2024-05-22T21:39:05.000Z, location(gps): 39.8799925,-86.08255859, 25.1C/52.8%RH, voltage: 5.42",
"created_at": "2024-05-22T22:39:33.737167Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "25.09",
"humidity": "52.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123581/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123581
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.911days 2023-07-13T00:48:49Z 25C 78F, 53%RH, now: 2024-05-22T22:41:03Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T22:41:40.095120Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87990952",
"longitude": "-86.08250427",
"temperature": "25.31",
"humidity": "52.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123582/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123582
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T22:13:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.2C/50.5%RH, voltage: 4.25",
"created_at": "2024-05-22T22:57:22.485953Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.19",
"humidity": "50.54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123583/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123583
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-22T23:13:53.000Z, file: _track.qo, location(gps): 45.4982075,-73.69328516, 25C/0%RH, voltage: 4.19",
"created_at": "2024-05-22T23:14:15.072873Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982075",
"longitude": "-73.69328516",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123584/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123584
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T23:16:29.000Z, file: _track.qo, location(tower): 45.5046875,-73.69148438, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-22T23:17:07.710002Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123585/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123585
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-22T23:33:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.7C/0%RH, voltage: 4.15",
"created_at": "2024-05-22T23:34:12.319941Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123586/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123586
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 315.412days 2023-07-12T13:44:32Z 21C 69F, 64%RH, now: 2024-05-22T23:37:49Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-22T23:38:41.459414Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87989807",
"longitude": "-86.08311462",
"temperature": "20.78",
"humidity": "63.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123587/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123587
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-22T23:39:21.000Z, file: _track.qo, where_when: 2024-05-22T22:39:13.000Z, location(gps): 39.8799925,-86.08255859, 25.1C/53.3%RH, voltage: 5.42",
"created_at": "2024-05-22T23:39:41.921561Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799925",
"longitude": "-86.08255859",
"temperature": "25.11",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123588/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123588
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 314.953days 2023-07-13T00:48:49Z 25C 77F, 53%RH, now: 2024-05-22T23:41:04Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-22T23:41:40.464651Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993622",
"longitude": "-86.08254242",
"temperature": "25.28",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123589/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123589
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T23:53:33.000Z, why: USB power ON {usb-enabled}, location(tower): 45.4923375,-73.68004688, voltage: 5.14",
"created_at": "2024-05-22T23:57:56.553966Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123590/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123590
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-22T23:53:35.000Z, file: _track.qo, location(tower): 45.4923375,-73.68004688, 24.8C/0%RH, voltage: 5.14",
"created_at": "2024-05-22T23:57:56.820738Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4923375",
"longitude": "-73.68004688",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123591/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123591
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T23:53:32.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4941625,-73.68964062, voltage: 5.35",
"created_at": "2024-05-22T23:58:25.239072Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941625",
"longitude": "-73.68964062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123592/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123592
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T23:53:34.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4941625,-73.68964062, voltage: 5.34",
"created_at": "2024-05-22T23:58:25.524802Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941625",
"longitude": "-73.68964062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123593/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123593
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-22T22:58:47.000Z, file: _temp.qo, where_when: , location(tower): 45.4941625,-73.68964062, 23.2C/50.9%RH, voltage: 4.25",
"created_at": "2024-05-22T23:58:25.615928Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4941625",
"longitude": "-73.68964062",
"temperature": "23.19",
"humidity": "50.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/123594/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 123594
}
]
}