HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 141919,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=529",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=527",
"results": [
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T17:45:33.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 25C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T17:46:04.634547Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122095/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122095
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T17:53:40.000Z, file: _track.qo, location(gps): 45.4980525,-73.69319141, 24.5C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T17:54:06.747082Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69319141",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122096/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122096
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T16:57:31.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/49.3%RH, voltage: 4.22",
"created_at": "2024-05-15T17:57:23.649574Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.38",
"humidity": "49.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122097/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122097
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T17:42:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.3C/49.2%RH, voltage: 4.25",
"created_at": "2024-05-15T17:57:24.138782Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.34",
"humidity": "49.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122098/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122098
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T17:59:43.000Z, file: _track.qo, where_when: 2024-05-15T16:59:35.000Z, location(gps): 39.8798075,-86.08241016, 20.7C/62%RH, voltage: 5.41",
"created_at": "2024-05-15T18:00:07.442281Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08241016",
"temperature": "20.66",
"humidity": "61.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122099/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122099
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T18:00:14.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.1C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T18:00:34.688371Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122100/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122100
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.193days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T18:22:51Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T18:23:44.560898Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08254242",
"temperature": "20.89",
"humidity": "63.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122101/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122101
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.744days 2023-07-13T00:48:49Z 21C 70F, 60%RH, now: 2024-05-15T18:39:53Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T18:40:30.088829Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.10",
"humidity": "59.71",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122102/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122102
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T18:42:02.000Z, file: _track.qo, location(gps): 45.4979675,-73.69333984, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T18:42:25.686814Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69333984",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122103/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122103
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T18:45:33.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.2C/0%RH, voltage: 4.24",
"created_at": "2024-05-15T18:46:03.707180Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122104/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122104
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T18:27:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/49%RH, voltage: 4.25",
"created_at": "2024-05-15T18:57:22.677765Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.41",
"humidity": "49.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122105/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122105
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T18:59:51.000Z, file: _track.qo, where_when: 2024-05-15T17:59:43.000Z, location(gps): 39.8798075,-86.08241016, 20.8C/61.8%RH, voltage: 5.41",
"created_at": "2024-05-15T19:00:12.438305Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08241016",
"temperature": "20.75",
"humidity": "61.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122106/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122106
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T19:00:22.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.5C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T19:00:49.572787Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122107/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122107
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.235days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T19:22:57Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T19:23:50.097264Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08254242",
"temperature": "20.87",
"humidity": "63.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122108/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122108
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T19:30:34.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T19:30:58.069368Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122109/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122109
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.785days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T19:39:54Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T19:40:30.629263Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.24",
"humidity": "59.40",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122110/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122110
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T19:45:33.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.5C/0%RH, voltage: 4.24",
"created_at": "2024-05-15T19:46:03.227470Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122111/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122111
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T19:12:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/49%RH, voltage: 4.25",
"created_at": "2024-05-15T19:57:22.346978Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.38",
"humidity": "49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122112/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122112
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T19:59:59.000Z, file: _track.qo, where_when: 2024-05-15T18:59:51.000Z, location(gps): 39.8798075,-86.08241016, 20.9C/62.7%RH, voltage: 5.41",
"created_at": "2024-05-15T20:00:20.773749Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08241016",
"temperature": "20.86",
"humidity": "62.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122113/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122113
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T20:00:30.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.9C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T20:01:00.700964Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122114/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122114
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T20:19:03.000Z, file: _track.qo, location(gps): 45.4979675,-73.69332422, 24.7C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T20:19:27.470672Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69332422",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122115/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122115
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.277days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-15T20:23:02Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T20:23:55.125364Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08254242",
"temperature": "20.89",
"humidity": "63.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122116/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122116
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T20:38:43.000Z, file: _track.qo, where_when: 2024-05-15T19:59:59.000Z, location(gps): 39.8798075,-86.08241016, 21.1C/65.2%RH, voltage: 5.41",
"created_at": "2024-05-15T20:39:05.385016Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798075",
"longitude": "-86.08241016",
"temperature": "21.14",
"humidity": "65.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122117/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122117
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.827days 2023-07-13T00:48:49Z 22C 71F, 62%RH, now: 2024-05-15T20:39:54Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T20:40:30.688013Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.52",
"humidity": "61.63",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122118/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122118
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T20:40:25.000Z, file: _track.qo, where_when: 2024-05-15T20:40:25.000Z, location(gps): 39.8799125,-86.08235547, 21.1C/65.2%RH, voltage: 5.35",
"created_at": "2024-05-15T20:40:59.447222Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.14",
"humidity": "65.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122119/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122119
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T20:45:33.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.5C/0%RH, voltage: 4.24",
"created_at": "2024-05-15T20:46:04.030229Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122120/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122120
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T19:57:31.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/49%RH, voltage: 4.22",
"created_at": "2024-05-15T20:57:23.135376Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.4",
"humidity": "49.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122121/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122121
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T20:42:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/48.9%RH, voltage: 4.25",
"created_at": "2024-05-15T20:57:23.347791Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.54",
"humidity": "48.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122122/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122122
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T21:00:38.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.1C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T21:01:00.699950Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122123/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122123
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T21:07:34.000Z, file: _track.qo, location(gps): 45.4978275,-73.69327734, 25.1C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T21:08:01.035132Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978275",
"longitude": "-73.69327734",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122124/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122124
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.318days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-15T21:23:07Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T21:24:00.573461Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08254242",
"temperature": "20.92",
"humidity": "62.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122125/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122125
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.869days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-15T21:39:54Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T21:40:29.154511Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.64",
"humidity": "60.50",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122126/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122126
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T21:40:35.000Z, file: _track.qo, where_when: 2024-05-15T20:40:25.000Z, location(gps): 39.8799125,-86.08235547, 21.1C/63.5%RH, voltage: 5.41",
"created_at": "2024-05-15T21:41:42.296917Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.12",
"humidity": "63.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122127/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122127
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T21:45:33.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.7C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T21:46:06.932705Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122128/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122128
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T21:55:50.000Z, file: _track.qo, location(gps): 45.4979225,-73.69326172, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T21:56:14.022748Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979225",
"longitude": "-73.69326172",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122129/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122129
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T21:27:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.6C/48.9%RH, voltage: 4.25",
"created_at": "2024-05-15T21:57:25.395073Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.63",
"humidity": "48.86",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122130/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122130
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T22:00:46.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T22:01:06.128636Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122131/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122131
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.360days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-15T22:23:13Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T22:24:06.119365Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08254242",
"temperature": "20.93",
"humidity": "62.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122132/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122132
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.910days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-15T22:39:55Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T22:40:31.644809Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.67",
"humidity": "60.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122133/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122133
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T22:40:43.000Z, file: _track.qo, where_when: 2024-05-15T21:40:35.000Z, location(gps): 39.8799125,-86.08235547, 21.1C/63.2%RH, voltage: 5.41",
"created_at": "2024-05-15T22:41:03.808498Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.14",
"humidity": "63.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122134/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122134
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T22:44:32.000Z, file: _track.qo, location(gps): 45.4980125,-73.69333984, 25C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T22:45:14.010108Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69333984",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122135/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122135
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T22:45:33.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.7C/0%RH, voltage: 4.24",
"created_at": "2024-05-15T22:46:03.458474Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122136/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122136
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T22:12:24.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.6C/48.8%RH, voltage: 4.25",
"created_at": "2024-05-15T22:57:24.680692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.64",
"humidity": "48.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122137/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122137
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T22:57:17.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.6C/48.8%RH, voltage: 4.26",
"created_at": "2024-05-15T22:57:24.880631Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.64",
"humidity": "48.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122138/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122138
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T23:00:54.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.9C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T23:01:21.326453Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122139/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122139
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T23:09:09.000Z, file: _track.qo, where_when: 2024-05-15T22:40:43.000Z, location(gps): 39.8799125,-86.08235547, 21.3C/63.1%RH, voltage: 5.41",
"created_at": "2024-05-15T23:09:35.416373Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.27",
"humidity": "63.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122140/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122140
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T23:23:29.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980375,-73.69327734, voltage: 5.14",
"created_at": "2024-05-15T23:23:47.479759Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122141/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122141
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T23:23:31.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 24.8C/0%RH, voltage: 5.14",
"created_at": "2024-05-15T23:23:47.747044Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122142/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122142
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T23:23:31.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980125,-73.69333984, voltage: 5.12",
"created_at": "2024-05-15T23:23:48.779598Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69333984",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122143/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122143
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T23:23:33.000Z, file: _track.qo, location(gps): 45.4980125,-73.69333984, 25.3C/0%RH, voltage: 5.17",
"created_at": "2024-05-15T23:23:48.960750Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69333984",
"temperature": "25.27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122144/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122144
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T23:23:25.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.35",
"created_at": "2024-05-15T23:23:54.472734Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122145/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122145
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T23:23:27.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-05-15T23:23:54.679197Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122146/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122146
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T23:23:28.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.6C/48.9%RH, voltage: 5.35",
"created_at": "2024-05-15T23:23:54.789740Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.62",
"humidity": "48.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122147/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122147
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.402days 2023-07-12T13:44:32Z 22C 71F, 60%RH, now: 2024-05-15T23:23:18Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T23:24:10.311562Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87974548",
"longitude": "-86.08247375",
"temperature": "21.80",
"humidity": "60.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122148/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122148
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T23:25:17.000Z, file: _track.qo, location(gps): 45.4980925,-73.69309766, 29.7C/0%RH, voltage: 5.14",
"created_at": "2024-05-15T23:25:40.801891Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980925",
"longitude": "-73.69309766",
"temperature": "29.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122149/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122149
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.952days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-15T23:39:55Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T23:40:32.006709Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.76",
"humidity": "60.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122150/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122150
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T23:46:23.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 26.5C/0%RH, voltage: 5.2",
"created_at": "2024-05-15T23:46:40.795628Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "26.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122151/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122151
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T23:42:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/48.7%RH, voltage: 5.39",
"created_at": "2024-05-15T23:57:17.054569Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.22",
"humidity": "48.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122152/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122152
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-16T00:01:02.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-16T00:01:30.725882Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122153/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122153
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-16T00:09:19.000Z, file: _track.qo, where_when: 2024-05-15T22:40:43.000Z, location(gps): 39.8799125,-86.08235547, 21.2C/63.2%RH, voltage: 5.41",
"created_at": "2024-05-16T00:09:40.311779Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.25",
"humidity": "63.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122154/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122154
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.444days 2023-07-12T13:44:32Z 21C 70F, 62%RH, now: 2024-05-16T00:23:23Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-16T00:24:16.532595Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87974548",
"longitude": "-86.08247375",
"temperature": "21.22",
"humidity": "62.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122155/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122155
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T00:25:23.000Z, file: _track.qo, location(gps): 45.4980925,-73.69309766, 26.8C/0%RH, voltage: 5.26",
"created_at": "2024-05-16T00:25:41.430319Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980925",
"longitude": "-73.69309766",
"temperature": "26.77",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122156/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122156
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T00:26:32.000Z, file: _track.qo, location(gps): 45.4979025,-73.69323828, 29C/0%RH, voltage: 5.18",
"created_at": "2024-05-16T00:26:56.963680Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979025",
"longitude": "-73.69323828",
"temperature": "29.03",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122157/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122157
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.994days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-16T00:39:55Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-16T00:40:30.529176Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.72",
"humidity": "60.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122158/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122158
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-16T00:46:29.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 26.2C/0%RH, voltage: 5.21",
"created_at": "2024-05-16T00:46:46.902244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122159/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122159
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T00:27:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/48.5%RH, voltage: 5.39",
"created_at": "2024-05-16T00:57:17.408565Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.21",
"humidity": "48.52",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122160/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122160
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-16T01:01:10.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.7C/0%RH, voltage: 5.23",
"created_at": "2024-05-16T01:01:40.193049Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122161/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122161
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-16T01:09:27.000Z, file: _track.qo, where_when: 2024-05-15T22:40:43.000Z, location(gps): 39.8799125,-86.08235547, 21.2C/63.2%RH, voltage: 5.42",
"created_at": "2024-05-16T01:09:47.164232Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.17",
"humidity": "63.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122162/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122162
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.485days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-16T01:23:29Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-16T01:24:20.798703Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87974548",
"longitude": "-86.08247375",
"temperature": "21.00",
"humidity": "62.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122163/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122163
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T01:26:39.000Z, file: _track.qo, location(gps): 45.4979025,-73.69323828, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-16T01:26:56.924558Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979025",
"longitude": "-73.69323828",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122164/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122164
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T01:27:56.000Z, file: _track.qo, location(gps): 45.4982125,-73.69392578, 29.4C/0%RH, voltage: 5.18",
"created_at": "2024-05-16T01:28:19.033599Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982125",
"longitude": "-73.69392578",
"temperature": "29.36",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122165/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122165
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 308.036days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-16T01:39:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-16T01:40:31.499309Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.62",
"humidity": "60.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122166/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122166
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-16T01:46:37.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 25.9C/0%RH, voltage: 5.2",
"created_at": "2024-05-16T01:46:54.554689Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "25.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122167/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122167
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T01:12:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 24.2C/48.7%RH, voltage: 5.39",
"created_at": "2024-05-16T01:57:18.246571Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "24.19",
"humidity": "48.74",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122168/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122168
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-16T02:01:18.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-16T02:01:38.470731Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122169/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122169
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-16T02:09:35.000Z, file: _track.qo, where_when: 2024-05-15T22:40:43.000Z, location(gps): 39.8799125,-86.08235547, 21.1C/63.1%RH, voltage: 5.41",
"created_at": "2024-05-16T02:09:55.618300Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.11",
"humidity": "63.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122170/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122170
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.527days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-16T02:23:34Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-16T02:24:25.989158Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87979889",
"longitude": "-86.08248138",
"temperature": "20.99",
"humidity": "63.05",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122171/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122171
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T02:28:03.000Z, file: _track.qo, location(gps): 45.4982125,-73.69392578, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-16T02:28:20.080349Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982125",
"longitude": "-73.69392578",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122172/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122172
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T02:29:04.000Z, file: _track.qo, location(gps): 45.4979575,-73.69322266, 28.8C/0%RH, voltage: 5.18",
"created_at": "2024-05-16T02:29:26.783114Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69322266",
"temperature": "28.83",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122173/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122173
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 308.077days 2023-07-13T00:48:49Z 22C 71F, 60%RH, now: 2024-05-16T02:39:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-16T02:40:31.460551Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.54",
"humidity": "60.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122174/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122174
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-16T02:46:45.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 26.2C/0%RH, voltage: 5.2",
"created_at": "2024-05-16T02:47:01.988249Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122175/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122175
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T01:57:23.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/49%RH, voltage: 5.26",
"created_at": "2024-05-16T02:57:19.238161Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.23",
"humidity": "49.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122176/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122176
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T02:42:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.4C/49.5%RH, voltage: 5.39",
"created_at": "2024-05-16T02:57:19.443841Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.35",
"humidity": "49.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122177/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122177
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-16T03:01:26.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.6C/0%RH, voltage: 5.23",
"created_at": "2024-05-16T03:01:52.870315Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122178/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122178
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-16T03:09:43.000Z, file: _track.qo, where_when: 2024-05-15T22:40:43.000Z, location(gps): 39.8799125,-86.08235547, 21C/63.1%RH, voltage: 5.41",
"created_at": "2024-05-16T03:10:03.116447Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "21.02",
"humidity": "63.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122179/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122179
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T03:23:15.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979575,-73.69322266, voltage: 4.21",
"created_at": "2024-05-16T03:23:34.079637Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69322266",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122180/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122180
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T03:23:17.000Z, file: _track.qo, location(gps): 45.4979575,-73.69322266, 26.3C/0%RH, voltage: 4.21",
"created_at": "2024-05-16T03:23:34.383575Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69322266",
"temperature": "26.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122181/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122181
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-16T03:23:15.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4980375,-73.69327734, voltage: 4.19",
"created_at": "2024-05-16T03:23:49.236035Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122182/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122182
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-16T03:23:17.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 25.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-16T03:23:49.433467Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "25.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122183/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122183
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T03:23:09.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.26",
"created_at": "2024-05-16T03:24:01.535327Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122184/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122184
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T03:23:11.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.25",
"created_at": "2024-05-16T03:24:01.751955Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122185/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122185
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T03:23:12.000Z, file: _track.qo, where_when: , location(tower): 45.4938875,-73.69292188, 24.5C/49.7%RH, voltage: 4.25",
"created_at": "2024-05-16T03:24:02.034578Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "24.55",
"humidity": "49.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122186/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122186
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 308.569days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-16T03:23:39Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-16T03:24:31.250348Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87979889",
"longitude": "-86.08248138",
"temperature": "20.97",
"humidity": "63.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122187/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122187
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T03:25:01.000Z, file: _track.qo, location(gps): 45.4978575,-73.69393359, 27.7C/0%RH, voltage: 4.17",
"created_at": "2024-05-16T03:25:24.495678Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978575",
"longitude": "-73.69393359",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122188/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122188
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 308.119days 2023-07-13T00:48:49Z 21C 71F, 60%RH, now: 2024-05-16T03:39:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-16T03:40:37.398453Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88087845",
"longitude": "-86.08317566",
"temperature": "21.45",
"humidity": "60.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122189/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122189
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-16T03:46:45.000Z, file: _track.qo, location(gps): 45.4980375,-73.69327734, 25C/0%RH, voltage: 4.25",
"created_at": "2024-05-16T03:47:23.398391Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69327734",
"temperature": "25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122190/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122190
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-16T03:27:16.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.5C/49.8%RH, voltage: 4.26",
"created_at": "2024-05-16T03:57:19.837531Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.54",
"humidity": "49.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122191/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122191
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-16T04:01:34.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.1C/0%RH, voltage: 5.23",
"created_at": "2024-05-16T04:01:54.584612Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122192/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122192
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-16T04:09:51.000Z, file: _track.qo, where_when: 2024-05-15T22:40:43.000Z, location(gps): 39.8799125,-86.08235547, 20.9C/63%RH, voltage: 5.41",
"created_at": "2024-05-16T04:10:11.066475Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08235547",
"temperature": "20.92",
"humidity": "63.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122193/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122193
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-16T04:13:33.000Z, file: _track.qo, location(gps): 45.4981375,-73.69284766, 25.3C/0%RH, voltage: 4.21",
"created_at": "2024-05-16T04:13:57.367307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69284766",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122194/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122194
}
]
}