HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 141759,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=494",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=492",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T17:39:46.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.3C/44.3%RH, voltage: 4.25",
"created_at": "2024-04-28T17:57:23.195181Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.26",
"humidity": "44.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118369/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118369
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T18:08:19.000Z, file: _track.qo, where_when: 2024-04-28T17:08:11.000Z, location(gps): 39.8799175,-86.08227734, 22C/47.8%RH, voltage: 5.41",
"created_at": "2024-04-28T18:08:25.209426Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "21.95",
"humidity": "47.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118370/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118370
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T18:20:56.000Z, file: _track.qo, location(gps): 45.4978775,-73.69364453, 23.1C/0%RH, voltage: 4.2",
"created_at": "2024-04-28T18:21:18.662042Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978775",
"longitude": "-73.69364453",
"temperature": "23.08",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118371/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118371
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.742days 2023-07-13T00:48:49Z 23C 73F, 49%RH, now: 2024-04-28T18:36:53Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-28T18:37:36.494499Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87986374",
"longitude": "-86.08232880",
"temperature": "22.93",
"humidity": "48.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118372/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118372
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T18:39:10.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 22.5C/50.2%RH, voltage: 5.41",
"created_at": "2024-04-28T18:39:15.416496Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "22.5",
"humidity": "50.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118373/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118373
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-28T18:43:24.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24C/0%RH, voltage: 5.23",
"created_at": "2024-04-28T18:43:34.091759Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118374/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118374
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T18:44:07.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 22.1C/0%RH, voltage: 4.25",
"created_at": "2024-04-28T18:44:47.535288Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "22.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118375/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118375
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.211days 2023-07-12T13:44:32Z 19C 65F, 61%RH, now: 2024-04-28T18:47:56Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-28T18:48:33.594038Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "18.50",
"humidity": "60.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118376/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118376
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T18:24:46.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.4C/44.1%RH, voltage: 4.25",
"created_at": "2024-04-28T18:57:23.074454Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.43",
"humidity": "44.15",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118377/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118377
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T19:09:26.000Z, file: _track.qo, location(gps): 45.4978625,-73.69337891, 23.1C/0%RH, voltage: 4.19",
"created_at": "2024-04-28T19:09:49.000919Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978625",
"longitude": "-73.69337891",
"temperature": "23.08",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118379/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118379
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T19:14:19.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 22.5C/50.9%RH, voltage: 5.42",
"created_at": "2024-04-28T19:14:29.207265Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "22.48",
"humidity": "50.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118380/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118380
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T19:25:31.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 22.2C/0%RH, voltage: 4.22",
"created_at": "2024-04-28T19:26:01.902688Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "22.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118381/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118381
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T19:26:48.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979525,-73.69323047, voltage: 5.08",
"created_at": "2024-04-28T19:27:06.194227Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118382/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118382
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T19:26:50.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 22.2C/0%RH, voltage: 5.14",
"created_at": "2024-04-28T19:27:06.476807Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "22.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118383/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118383
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T19:26:53.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4978625,-73.69337891, voltage: 5.12",
"created_at": "2024-04-28T19:27:09.728499Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978625",
"longitude": "-73.69337891",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118384/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118384
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T19:26:55.000Z, file: _track.qo, location(gps): 45.4978625,-73.69337891, 23C/0%RH, voltage: 5.17",
"created_at": "2024-04-28T19:27:10.979490Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978625",
"longitude": "-73.69337891",
"temperature": "23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118385/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118385
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T19:26:48.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.36",
"created_at": "2024-04-28T19:27:14.823960Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118386/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118386
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T19:26:50.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-04-28T19:27:15.026289Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118387/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118387
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T19:09:46.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.5C/44.2%RH, voltage: 4.25",
"created_at": "2024-04-28T19:27:15.112989Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.47",
"humidity": "44.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118388/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118388
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T19:26:51.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.5C/44.2%RH, voltage: 5.35",
"created_at": "2024-04-28T19:27:15.467046Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.45",
"humidity": "44.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118389/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118389
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.783days 2023-07-13T00:48:49Z 23C 73F, 49%RH, now: 2024-04-28T19:36:53Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-28T19:37:37.348705Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08252716",
"temperature": "23.04",
"humidity": "49.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118390/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118390
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-28T19:43:32.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.6C/0%RH, voltage: 5.23",
"created_at": "2024-04-28T19:43:50.603352Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118391/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118391
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T19:46:22.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.2C/0%RH, voltage: 5.2",
"created_at": "2024-04-28T19:46:40.344147Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118392/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118392
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.252days 2023-07-12T13:44:32Z 19C 67F, 62%RH, now: 2024-04-28T19:48:01Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-28T19:48:38.092938Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "19.33",
"humidity": "61.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118393/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118393
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T19:54:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.9C/44.1%RH, voltage: 5.39",
"created_at": "2024-04-28T19:57:13.948026Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.93",
"humidity": "44.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118394/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118394
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T20:09:36.000Z, file: _track.qo, location(gps): 45.4978625,-73.69337891, 24.8C/0%RH, voltage: 5.25",
"created_at": "2024-04-28T20:09:51.697507Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978625",
"longitude": "-73.69337891",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118396/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118396
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T20:10:48.000Z, file: _track.qo, location(gps): 45.4979325,-73.69333203, 27.4C/0%RH, voltage: 5.18",
"created_at": "2024-04-28T20:11:09.728600Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979325",
"longitude": "-73.69333203",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118397/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118397
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T20:14:27.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 22.7C/53%RH, voltage: 5.41",
"created_at": "2024-04-28T20:14:32.382087Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "22.72",
"humidity": "53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118398/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118398
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T20:34:29.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.3C/0%RH, voltage: 5.2",
"created_at": "2024-04-28T20:34:47.376107Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118399/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118399
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.825days 2023-07-13T00:48:49Z 23C 74F, 50%RH, now: 2024-04-28T20:36:53Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-28T20:37:37.101453Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.24",
"humidity": "50.20",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118400/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118400
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-28T20:43:40.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.3C/0%RH, voltage: 5.23",
"created_at": "2024-04-28T20:44:01.316662Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118401/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118401
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.294days 2023-07-12T13:44:32Z 20C 67F, 61%RH, now: 2024-04-28T20:48:06Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-28T20:48:43.979564Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "19.68",
"humidity": "61.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118402/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118402
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T20:39:40.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 22.1C/44%RH, voltage: 5.39",
"created_at": "2024-04-28T20:57:14.759864Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "22.06",
"humidity": "43.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118403/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118403
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T21:10:56.000Z, file: _track.qo, location(gps): 45.4979325,-73.69333203, 24.8C/0%RH, voltage: 5.25",
"created_at": "2024-04-28T21:11:12.126735Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979325",
"longitude": "-73.69333203",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118404/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118404
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T21:12:41.000Z, file: _track.qo, location(gps): 45.4979925,-73.69310547, 27.9C/0%RH, voltage: 5.17",
"created_at": "2024-04-28T21:13:03.266156Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69310547",
"temperature": "27.86",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118405/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118405
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T21:14:35.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 22.8C/52.8%RH, voltage: 5.42",
"created_at": "2024-04-28T21:14:40.461612Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "22.78",
"humidity": "52.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118406/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118406
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T21:34:35.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.2C/0%RH, voltage: 5.2",
"created_at": "2024-04-28T21:34:53.983972Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118407/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118407
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.867days 2023-07-13T00:48:49Z 23C 74F, 50%RH, now: 2024-04-28T21:36:54Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-28T21:37:36.382263Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.39",
"humidity": "50.32",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118408/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118408
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-28T21:43:48.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-04-28T21:43:58.245074Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118409/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118409
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T21:48:26.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.1C/0%RH, voltage: 5.2",
"created_at": "2024-04-28T21:48:44.352612Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118410/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118410
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.336days 2023-07-12T13:44:32Z 21C 69F, 58%RH, now: 2024-04-28T21:48:12Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-28T21:48:49.051093Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.69",
"humidity": "58.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118411/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118411
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T21:24:40.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22C/44.2%RH, voltage: 5.39",
"created_at": "2024-04-28T21:57:14.598398Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.99",
"humidity": "44.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118412/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118412
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T22:12:48.000Z, file: _track.qo, location(gps): 45.4979925,-73.69310547, 24.5C/0%RH, voltage: 5.25",
"created_at": "2024-04-28T22:13:04.444587Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69310547",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118414/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118414
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T22:14:03.000Z, file: _track.qo, location(gps): 45.4980075,-73.69319922, 27.4C/0%RH, voltage: 5.18",
"created_at": "2024-04-28T22:14:34.759577Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69319922",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118415/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118415
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T22:14:43.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 22.9C/52.8%RH, voltage: 5.41",
"created_at": "2024-04-28T22:14:48.136338Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "22.92",
"humidity": "52.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118416/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118416
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.908days 2023-07-13T00:48:49Z 23C 74F, 51%RH, now: 2024-04-28T22:36:54Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-28T22:37:37.854774Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.40",
"humidity": "50.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118417/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118417
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-28T22:43:56.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.2C/0%RH, voltage: 5.22",
"created_at": "2024-04-28T22:44:06.337704Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118418/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118418
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T22:48:35.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 23.8C/0%RH, voltage: 5.2",
"created_at": "2024-04-28T22:48:53.298269Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "23.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118419/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118419
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.378days 2023-07-12T13:44:32Z 20C 69F, 61%RH, now: 2024-04-28T22:48:17Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-28T22:48:53.469501Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.29",
"humidity": "60.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118420/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118420
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T22:09:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 22C/44.3%RH, voltage: 5.39",
"created_at": "2024-04-28T22:57:15.771787Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "21.99",
"humidity": "44.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118421/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118421
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T22:54:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 21.9C/44.4%RH, voltage: 5.39",
"created_at": "2024-04-28T22:57:15.956989Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "21.95",
"humidity": "44.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118422/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118422
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T23:14:12.000Z, file: _track.qo, location(gps): 45.4980075,-73.69319922, 24.3C/0%RH, voltage: 5.25",
"created_at": "2024-04-28T23:14:28.144754Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69319922",
"temperature": "24.3",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118423/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118423
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-28T23:14:51.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 23C/52.9%RH, voltage: 5.42",
"created_at": "2024-04-28T23:14:56.305019Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "23",
"humidity": "52.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118424/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118424
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-28T23:15:16.000Z, file: _track.qo, location(gps): 45.4980075,-73.69320703, 27.2C/0%RH, voltage: 5.18",
"created_at": "2024-04-28T23:15:40.402860Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69320703",
"temperature": "27.22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118425/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118425
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.950days 2023-07-13T00:48:49Z 24C 74F, 50%RH, now: 2024-04-28T23:36:54Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-28T23:37:38.455345Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.59",
"humidity": "50.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118426/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118426
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-28T23:44:04.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.6C/0%RH, voltage: 5.23",
"created_at": "2024-04-28T23:44:22.904113Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118427/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118427
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.419days 2023-07-12T13:44:32Z 20C 68F, 61%RH, now: 2024-04-28T23:48:22Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-28T23:49:01.656875Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.19",
"humidity": "61.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118428/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118428
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-28T23:48:43.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 23.9C/0%RH, voltage: 5.2",
"created_at": "2024-04-28T23:49:04.385560Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "23.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118429/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118429
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-28T23:39:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.9C/44.8%RH, voltage: 5.39",
"created_at": "2024-04-28T23:57:15.883443Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.91",
"humidity": "44.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118430/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118430
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-29T00:14:59.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 23.1C/54.1%RH, voltage: 5.42",
"created_at": "2024-04-29T00:15:03.992999Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "23.06",
"humidity": "54.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118432/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118432
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T00:15:24.000Z, file: _track.qo, location(gps): 45.4980075,-73.69320703, 24.5C/0%RH, voltage: 5.25",
"created_at": "2024-04-29T00:15:46.722223Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69320703",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118433/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118433
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T00:16:41.000Z, file: _track.qo, location(gps): 45.4978675,-73.69312109, 27.3C/0%RH, voltage: 5.17",
"created_at": "2024-04-29T00:17:13.037218Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978675",
"longitude": "-73.69312109",
"temperature": "27.33",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118434/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118434
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T00:20:44.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 23.7C/0%RH, voltage: 5.2",
"created_at": "2024-04-29T00:21:02.424844Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "23.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118435/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118435
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 290.992days 2023-07-13T00:48:49Z 24C 74F, 52%RH, now: 2024-04-29T00:36:55Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-29T00:37:40.875818Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.60",
"humidity": "51.52",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118436/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118436
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-29T00:44:12.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.1C/0%RH, voltage: 5.23",
"created_at": "2024-04-29T00:44:27.643990Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118437/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118437
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T00:46:18.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24C/0%RH, voltage: 5.2",
"created_at": "2024-04-29T00:46:38.922035Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118438/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118438
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.461days 2023-07-12T13:44:32Z 20C 69F, 61%RH, now: 2024-04-29T00:48:28Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-29T00:49:04.778960Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.29",
"humidity": "60.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118439/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118439
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T00:24:40.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.9C/45.1%RH, voltage: 5.39",
"created_at": "2024-04-29T00:57:16.161017Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.94",
"humidity": "45.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118440/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118440
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-29T01:15:07.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 23C/53.7%RH, voltage: 5.41",
"created_at": "2024-04-29T01:15:11.657343Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "23.05",
"humidity": "53.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118442/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118442
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T01:16:48.000Z, file: _track.qo, location(gps): 45.4978675,-73.69312109, 24.6C/0%RH, voltage: 5.25",
"created_at": "2024-04-29T01:17:04.718549Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978675",
"longitude": "-73.69312109",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118443/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118443
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T01:18:12.000Z, file: _track.qo, location(gps): 45.4979525,-73.69302734, 27.7C/0%RH, voltage: 5.18",
"created_at": "2024-04-29T01:18:34.340511Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69302734",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118444/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118444
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T01:32:56.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.6C/0%RH, voltage: 5.2",
"created_at": "2024-04-29T01:33:14.302124Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118445/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118445
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-29T01:44:20.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.9C/0%RH, voltage: 5.22",
"created_at": "2024-04-29T01:44:38.077930Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118446/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118446
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 291.033days 2023-07-13T00:48:49Z 23C 74F, 52%RH, now: 2024-04-29T01:36:55Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-29T01:45:35.730488Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.47",
"humidity": "51.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118447/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118447
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.503days 2023-07-12T13:44:32Z 20C 69F, 60%RH, now: 2024-04-29T01:48:33Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-29T01:49:09.530898Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.39",
"humidity": "60.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118448/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118448
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T01:51:32.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.7C/0%RH, voltage: 5.2",
"created_at": "2024-04-29T01:51:50.715466Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118449/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118449
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T01:09:40.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 22.4C/44.7%RH, voltage: 5.39",
"created_at": "2024-04-29T01:57:17.476930Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "22.37",
"humidity": "44.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118451/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118451
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T01:54:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 22.2C/45%RH, voltage: 5.39",
"created_at": "2024-04-29T01:57:17.664149Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "22.21",
"humidity": "45.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118452/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118452
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-29T02:15:15.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 23C/53.3%RH, voltage: 5.41",
"created_at": "2024-04-29T02:15:19.467172Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "23.05",
"humidity": "53.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118453/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118453
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T02:18:20.000Z, file: _track.qo, location(gps): 45.4979525,-73.69302734, 24.9C/0%RH, voltage: 5.25",
"created_at": "2024-04-29T02:18:36.548253Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69302734",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118454/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118454
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T02:19:44.000Z, file: _track.qo, location(gps): 45.4978775,-73.69319922, 27.9C/0%RH, voltage: 5.18",
"created_at": "2024-04-29T02:20:05.993302Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978775",
"longitude": "-73.69319922",
"temperature": "27.86",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118455/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118455
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T02:29:30.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4978775,-73.69319922, voltage: 4.2",
"created_at": "2024-04-29T02:29:48.868470Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978775",
"longitude": "-73.69319922",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118456/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118456
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T02:29:32.000Z, file: _track.qo, location(gps): 45.4978775,-73.69319922, 25C/0%RH, voltage: 4.21",
"created_at": "2024-04-29T02:29:49.336818Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978775",
"longitude": "-73.69319922",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118457/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118457
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T02:29:28.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979525,-73.69323047, voltage: 4.19",
"created_at": "2024-04-29T02:30:03.453868Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118458/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118458
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T02:29:30.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 24.6C/0%RH, voltage: 4.2",
"created_at": "2024-04-29T02:30:03.699860Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118459/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118459
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T02:29:24.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.26",
"created_at": "2024-04-29T02:30:15.316901Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118460/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118460
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T02:29:26.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.25",
"created_at": "2024-04-29T02:30:15.510592Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118461/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118461
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T02:29:27.000Z, file: _track.qo, where_when: , location(tower): 45.4938875,-73.69292188, 22.4C/44.9%RH, voltage: 4.25",
"created_at": "2024-04-29T02:30:15.613222Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "22.39",
"humidity": "44.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118462/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118462
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 291.075days 2023-07-13T00:48:49Z 24C 74F, 51%RH, now: 2024-04-29T02:36:55Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-29T02:37:39.793207Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970352",
"longitude": "-86.08226776",
"temperature": "23.51",
"humidity": "51.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118463/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118463
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-29T02:44:28.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.2C/0%RH, voltage: 5.22",
"created_at": "2024-04-29T02:44:37.938626Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118464/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118464
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.545days 2023-07-12T13:44:32Z 20C 69F, 60%RH, now: 2024-04-29T02:48:38Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-29T02:49:15.086399Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.44",
"humidity": "59.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118465/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118465
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T02:51:35.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 23.1C/0%RH, voltage: 4.25",
"created_at": "2024-04-29T02:52:13.056035Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "23.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118466/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118466
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T02:39:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.2C/45%RH, voltage: 4.25",
"created_at": "2024-04-29T02:57:18.750291Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.2",
"humidity": "45.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118468/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118468
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-29T03:10:35.000Z, file: _track.qo, location(gps): 45.4979175,-73.69340234, 23.5C/0%RH, voltage: 4.21",
"created_at": "2024-04-29T03:10:57.465427Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69340234",
"temperature": "23.52",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118469/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118469
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-29T03:15:23.000Z, file: _track.qo, where_when: 2024-04-28T18:08:19.000Z, location(gps): 39.8799175,-86.08227734, 23.2C/53.1%RH, voltage: 5.42",
"created_at": "2024-04-29T03:15:27.380511Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799175",
"longitude": "-86.08227734",
"temperature": "23.19",
"humidity": "53.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118470/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118470
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 291.117days 2023-07-13T00:48:49Z 24C 74F, 51%RH, now: 2024-04-29T03:36:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-29T03:37:39.912613Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87984085",
"longitude": "-86.08238220",
"temperature": "23.53",
"humidity": "51.20",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118471/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118471
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-29T03:44:36.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.6C/0%RH, voltage: 5.22",
"created_at": "2024-04-29T03:44:52.479951Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118472/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118472
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 291.586days 2023-07-12T13:44:32Z 20C 69F, 60%RH, now: 2024-04-29T03:48:44Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-29T03:49:20.228604Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.50",
"humidity": "60.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118473/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118473
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-29T03:51:35.000Z, file: _track.qo, location(gps): 45.4979525,-73.69323047, 22.3C/0%RH, voltage: 4.25",
"created_at": "2024-04-29T03:52:13.360940Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69323047",
"temperature": "22.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118474/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118474
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-29T03:24:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.6C/45.5%RH, voltage: 4.27",
"created_at": "2024-04-29T03:57:19.868084Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.58",
"humidity": "45.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/118476/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 118476
}
]
}