HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 141519,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=448",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=446",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T12:23:49.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/39.3%RH, voltage: 5.39",
"created_at": "2024-04-05T12:57:23.629174Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.59",
"humidity": "39.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113260/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113260
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 267.969days 2023-07-12T13:44:32Z 20C 67F, 43%RH, now: 2024-04-05T12:59:32Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T13:00:25.965013Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.53",
"humidity": "42.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113261/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113261
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T13:10:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 18.4C/0%RH, voltage: 4.22",
"created_at": "2024-04-05T13:11:09.282265Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "18.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113262/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113262
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T13:15:13.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 20.7C/41.1%RH, voltage: 5.41",
"created_at": "2024-04-05T13:15:36.702854Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "20.67",
"humidity": "41.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113263/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113263
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T13:25:37.000Z, file: _track.qo, location(gps): 45.4982325,-73.69343359, 19.6C/0%RH, voltage: 4.21",
"created_at": "2024-04-05T13:25:59.426021Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982325",
"longitude": "-73.69343359",
"temperature": "19.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113264/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113264
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T13:29:19.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T13:29:37.122447Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113265/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113265
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.531days 2023-07-13T00:48:49Z 21C 70F, 41%RH, now: 2024-04-05T13:33:08Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T13:33:41.533771Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88011169",
"longitude": "-86.08240509",
"temperature": "20.85",
"humidity": "40.63",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113266/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113266
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T13:52:49.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 39.8798625,-86.07126562, voltage: 4.23",
"created_at": "2024-04-05T13:53:47.244210Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798625",
"longitude": "-86.07126562",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113268/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113268
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T13:52:51.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 39.8798625,-86.07126562, voltage: 4.22",
"created_at": "2024-04-05T13:53:47.457514Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798625",
"longitude": "-86.07126562",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113269/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113269
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T13:08:49.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/39.4%RH, voltage: 5.39",
"created_at": "2024-04-05T13:53:47.558751Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.63",
"humidity": "39.37",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113270/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113270
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T13:52:52.000Z, file: _track.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.7C/39.4%RH, voltage: 4.22",
"created_at": "2024-04-05T13:53:47.892825Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.73",
"humidity": "39.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113271/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113271
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T13:53:53.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.8C/40%RH, voltage: 4.22",
"created_at": "2024-04-05T13:54:24.602062Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.8",
"humidity": "40.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113272/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113272
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.010days 2023-07-12T13:44:32Z 19C 67F, 43%RH, now: 2024-04-05T13:59:37Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T14:00:31.092042Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.39",
"humidity": "43.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113273/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113273
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T14:10:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 18.8C/0%RH, voltage: 4.22",
"created_at": "2024-04-05T14:11:18.233792Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "18.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113274/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113274
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T14:14:10.000Z, file: _track.qo, location(gps): 45.4982275,-73.69323828, 19.6C/0%RH, voltage: 4.2",
"created_at": "2024-04-05T14:14:33.030997Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982275",
"longitude": "-73.69323828",
"temperature": "19.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113275/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113275
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T14:15:21.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 20.9C/41.2%RH, voltage: 5.41",
"created_at": "2024-04-05T14:15:48.255569Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "20.91",
"humidity": "41.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113276/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113276
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T14:29:27.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T14:29:51.722704Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113277/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113277
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.572days 2023-07-13T00:48:49Z 21C 70F, 41%RH, now: 2024-04-05T14:33:08Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T14:33:42.068643Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88011169",
"longitude": "-86.08240509",
"temperature": "20.99",
"humidity": "40.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113278/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113278
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T14:38:59.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 22.1C/38.1%RH, voltage: 4.23",
"created_at": "2024-04-05T14:50:59.232072Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "22.14",
"humidity": "38.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113280/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113280
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.052days 2023-07-12T13:44:32Z 19C 67F, 43%RH, now: 2024-04-05T14:59:43Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T15:00:34.945687Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.30",
"humidity": "43.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113281/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113281
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T15:02:37.000Z, file: _track.qo, location(gps): 45.4979875,-73.69327734, 20C/0%RH, voltage: 4.2",
"created_at": "2024-04-05T15:02:59.277905Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69327734",
"temperature": "19.95",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113282/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113282
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T15:10:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 19.1C/0%RH, voltage: 4.25",
"created_at": "2024-04-05T15:11:16.388726Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "19.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113283/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113283
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T15:15:29.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.1C/41.1%RH, voltage: 5.41",
"created_at": "2024-04-05T15:15:50.327946Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.06",
"humidity": "41.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113284/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113284
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T15:24:15.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 22.1C/38%RH, voltage: 4.23",
"created_at": "2024-04-05T15:25:59.769420Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "22.08",
"humidity": "37.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113285/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113285
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T15:29:35.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.9C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T15:29:53.473845Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113286/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113286
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.614days 2023-07-13T00:48:49Z 21C 70F, 41%RH, now: 2024-04-05T15:33:09Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T15:33:44.625143Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88011169",
"longitude": "-86.08240509",
"temperature": "21.04",
"humidity": "40.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113287/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113287
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T15:51:21.000Z, file: _track.qo, location(gps): 45.4980525,-73.69345703, 20C/0%RH, voltage: 4.2",
"created_at": "2024-04-05T15:51:43.662324Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69345703",
"temperature": "19.95",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113289/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113289
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.094days 2023-07-12T13:44:32Z 19C 67F, 43%RH, now: 2024-04-05T15:59:48Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T16:00:40.644159Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.23",
"humidity": "43.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113290/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113290
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T16:10:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 19.4C/0%RH, voltage: 4.25",
"created_at": "2024-04-05T16:11:16.199560Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "19.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113291/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113291
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T16:09:15.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 22.1C/37.8%RH, voltage: 4.23",
"created_at": "2024-04-05T16:13:25.496854Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "22.06",
"humidity": "37.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113292/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113292
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T16:15:37.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.1C/40.7%RH, voltage: 5.41",
"created_at": "2024-04-05T16:15:57.662593Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.12",
"humidity": "40.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113293/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113293
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T16:29:43.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.4C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T16:30:01.243942Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113294/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113294
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.656days 2023-07-13T00:48:49Z 21C 70F, 41%RH, now: 2024-04-05T16:33:09Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T16:33:43.269112Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88011169",
"longitude": "-86.08240509",
"temperature": "21.19",
"humidity": "40.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113295/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113295
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T16:40:06.000Z, file: _track.qo, location(gps): 45.4979775,-73.69314453, 20.3C/0%RH, voltage: 4.2",
"created_at": "2024-04-05T16:40:28.869843Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979775",
"longitude": "-73.69314453",
"temperature": "20.28",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113297/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113297
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T16:54:12.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 21.2C/38.8%RH, voltage: 4.23",
"created_at": "2024-04-05T16:57:19.203189Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "21.15",
"humidity": "38.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113298/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113298
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.136days 2023-07-12T13:44:32Z 19C 67F, 43%RH, now: 2024-04-05T16:59:53Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T17:00:46.657915Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.19",
"humidity": "43.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113299/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113299
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T17:10:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 19.4C/0%RH, voltage: 4.25",
"created_at": "2024-04-05T17:11:16.270650Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "19.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113300/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113300
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T17:15:45.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.1C/40.3%RH, voltage: 5.41",
"created_at": "2024-04-05T17:16:05.844370Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.11",
"humidity": "40.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113301/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113301
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T17:28:35.000Z, file: _track.qo, location(gps): 45.4980125,-73.69315234, 20.3C/0%RH, voltage: 4.2",
"created_at": "2024-04-05T17:28:57.687532Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69315234",
"temperature": "20.28",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113302/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113302
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T17:29:51.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.4C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T17:30:21.144457Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113303/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113303
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T17:31:52.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 39.8720125,-86.08089062, voltage: 5.29",
"created_at": "2024-04-05T17:32:19.183321Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8720125",
"longitude": "-86.08089062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113304/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113304
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T17:31:54.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 39.8720125,-86.08089062, voltage: 5.32",
"created_at": "2024-04-05T17:32:19.371599Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8720125",
"longitude": "-86.08089062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113305/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113305
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T17:31:55.000Z, file: _track.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 21C/39%RH, voltage: 5.34",
"created_at": "2024-04-05T17:32:19.467164Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "21.05",
"humidity": "38.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113306/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113306
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.697days 2023-07-13T00:48:49Z 21C 70F, 40%RH, now: 2024-04-05T17:33:09Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T17:33:43.565398Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88011169",
"longitude": "-86.08240509",
"temperature": "21.27",
"humidity": "40.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113307/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113307
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T17:39:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 21.4C/39.4%RH, voltage: 5.36",
"created_at": "2024-04-05T17:57:13.758350Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "21.42",
"humidity": "39.4",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113309/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113309
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.177days 2023-07-12T13:44:32Z 20C 68F, 41%RH, now: 2024-04-05T17:59:59Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T18:00:51.957375Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "20.04",
"humidity": "41.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113310/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113310
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T18:10:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 19.5C/0%RH, voltage: 4.25",
"created_at": "2024-04-05T18:11:18.126576Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "19.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113311/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113311
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T18:15:53.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.2C/40.4%RH, voltage: 5.42",
"created_at": "2024-04-05T18:16:13.767851Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.19",
"humidity": "40.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113312/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113312
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T18:17:32.000Z, file: _track.qo, location(gps): 45.4979975,-73.69333984, 20.6C/0%RH, voltage: 4.2",
"created_at": "2024-04-05T18:17:53.694868Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69333984",
"temperature": "20.61",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113313/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113313
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T18:29:59.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.6C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T18:30:23.953147Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113314/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113314
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.739days 2023-07-13T00:48:49Z 21C 70F, 40%RH, now: 2024-04-05T18:33:10Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T18:33:44.635450Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88011169",
"longitude": "-86.08240509",
"temperature": "21.31",
"humidity": "39.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113315/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113315
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T18:54:38.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979975,-73.69333984, voltage: 5.12",
"created_at": "2024-04-05T18:54:54.360186Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69333984",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113317/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113317
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T18:54:40.000Z, file: _track.qo, location(gps): 45.4979975,-73.69333984, 21.1C/0%RH, voltage: 5.16",
"created_at": "2024-04-05T18:54:54.579671Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69333984",
"temperature": "21.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113318/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113318
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T18:54:36.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979925,-73.69333203, voltage: 5.13",
"created_at": "2024-04-05T18:54:55.855254Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113319/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113319
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T18:54:38.000Z, file: _track.qo, location(gps): 45.4979925,-73.69333203, 19.8C/0%RH, voltage: 5.14",
"created_at": "2024-04-05T18:54:56.162842Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69333203",
"temperature": "19.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113320/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113320
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T18:56:40.000Z, file: _track.qo, location(gps): 45.4978975,-73.69324609, 25.3C/0%RH, voltage: 5.15",
"created_at": "2024-04-05T18:57:01.595367Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69324609",
"temperature": "25.27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113321/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113321
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T18:24:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 21.2C/38.7%RH, voltage: 5.39",
"created_at": "2024-04-05T18:57:14.070810Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "21.19",
"humidity": "38.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113322/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113322
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.219days 2023-07-12T13:44:32Z 19C 67F, 43%RH, now: 2024-04-05T19:00:04Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T19:00:57.039172Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.44",
"humidity": "42.61",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113323/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113323
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T19:16:01.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.2C/39.9%RH, voltage: 5.42",
"created_at": "2024-04-05T19:16:22.441005Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.25",
"humidity": "39.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113324/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113324
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T19:20:13.000Z, file: _track.qo, location(gps): 45.4974175,-73.69262109, 26.9C/0%RH, voltage: 5.12",
"created_at": "2024-04-05T19:20:38.187686Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4974175",
"longitude": "-73.69262109",
"temperature": "26.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113325/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113325
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T19:30:07.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.6C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T19:30:25.113294Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113326/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113326
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.781days 2023-07-13T00:48:49Z 22C 71F, 39%RH, now: 2024-04-05T19:33:10Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T19:33:45.340398Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87999344",
"longitude": "-86.08258820",
"temperature": "21.61",
"humidity": "39.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113327/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113327
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T19:56:49.000Z, file: _track.qo, location(gps): 45.4978975,-73.69324609, 22.9C/0%RH, voltage: 5.25",
"created_at": "2024-04-05T19:57:05.627986Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978975",
"longitude": "-73.69324609",
"temperature": "22.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113329/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113329
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T19:09:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.9C/38.8%RH, voltage: 5.39",
"created_at": "2024-04-05T19:57:13.833538Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.89",
"humidity": "38.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113330/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113330
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T19:54:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.9C/38.8%RH, voltage: 5.39",
"created_at": "2024-04-05T19:57:14.049565Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.88",
"humidity": "38.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113331/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113331
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T19:58:05.000Z, file: _track.qo, location(gps): 45.4980025,-73.69343359, 25.8C/0%RH, voltage: 5.18",
"created_at": "2024-04-05T19:58:27.261405Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69343359",
"temperature": "25.8",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113332/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113332
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.261days 2023-07-12T13:44:32Z 19C 66F, 43%RH, now: 2024-04-05T20:00:09Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T20:01:02.511181Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.09",
"humidity": "42.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113333/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113333
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T20:03:05.000Z, file: _track.qo, location(gps): 45.4981625,-73.69308203, 21.8C/0%RH, voltage: 5.13",
"created_at": "2024-04-05T20:03:30.433660Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981625",
"longitude": "-73.69308203",
"temperature": "21.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113334/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113334
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T20:16:09.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.4C/39.3%RH, voltage: 5.41",
"created_at": "2024-04-05T20:16:35.519016Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.36",
"humidity": "39.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113335/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113335
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T20:30:15.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.1C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T20:30:33.015967Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113336/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113336
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.822days 2023-07-13T00:48:49Z 21C 71F, 39%RH, now: 2024-04-05T20:33:10Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T20:33:44.824766Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87999344",
"longitude": "-86.08258820",
"temperature": "21.49",
"humidity": "38.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113337/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113337
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T20:43:49.000Z, file: _track.qo, where_when: 2024-04-04T10:33:19.000Z, location(gps): 39.8799725,-86.08226172, 21.4C/39%RH, voltage: 5.41",
"created_at": "2024-04-05T20:44:09.942246Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799725",
"longitude": "-86.08226172",
"temperature": "21.38",
"humidity": "39.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113339/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113339
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T20:39:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.8C/38.9%RH, voltage: 5.39",
"created_at": "2024-04-05T20:57:15.478968Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.83",
"humidity": "38.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113340/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113340
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T20:58:13.000Z, file: _track.qo, location(gps): 45.4980025,-73.69343359, 22.7C/0%RH, voltage: 5.25",
"created_at": "2024-04-05T20:58:29.701601Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69343359",
"temperature": "22.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113341/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113341
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T20:59:41.000Z, file: _track.qo, location(gps): 45.4977875,-73.69335547, 25.9C/0%RH, voltage: 5.17",
"created_at": "2024-04-05T21:00:02.471148Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977875",
"longitude": "-73.69335547",
"temperature": "25.92",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113342/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113342
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.303days 2023-07-12T13:44:32Z 19C 66F, 43%RH, now: 2024-04-05T21:00:15Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T21:01:07.753701Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.07",
"humidity": "43.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113343/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113343
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T21:03:14.000Z, file: _track.qo, location(gps): 45.4981625,-73.69308203, 21.6C/0%RH, voltage: 5.2",
"created_at": "2024-04-05T21:03:34.791471Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981625",
"longitude": "-73.69308203",
"temperature": "21.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113344/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113344
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T21:10:02.000Z, file: _track.qo, where_when: 2024-04-05T21:10:00.000Z, location(gps): 39.8800875,-86.08257422, 21.3C/39.7%RH, voltage: 5.36",
"created_at": "2024-04-05T21:10:37.123606Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800875",
"longitude": "-86.08257422",
"temperature": "21.28",
"humidity": "39.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113345/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113345
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T21:30:23.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 21.6C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T21:30:41.235335Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "21.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113346/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113346
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.864days 2023-07-13T00:48:49Z 21C 71F, 40%RH, now: 2024-04-05T21:33:11Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T21:33:46.297459Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88047409",
"longitude": "-86.08255768",
"temperature": "21.49",
"humidity": "39.63",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113347/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113347
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T21:39:08.000Z, file: _track.qo, where_when: 2024-04-05T21:10:00.000Z, location(gps): 39.8800875,-86.08257422, 21.6C/39.1%RH, voltage: 5.41",
"created_at": "2024-04-05T21:39:28.684948Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800875",
"longitude": "-86.08257422",
"temperature": "21.59",
"humidity": "39.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113349/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113349
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T21:24:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.9C/39%RH, voltage: 5.39",
"created_at": "2024-04-05T21:57:15.402549Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.87",
"humidity": "38.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113350/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113350
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T21:59:49.000Z, file: _track.qo, location(gps): 45.4977875,-73.69335547, 22.7C/0%RH, voltage: 5.25",
"created_at": "2024-04-05T22:00:08.418107Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977875",
"longitude": "-73.69335547",
"temperature": "22.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113351/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113351
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.344days 2023-07-12T13:44:32Z 19C 66F, 43%RH, now: 2024-04-05T22:00:20Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T22:01:12.722391Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.01",
"humidity": "43.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113352/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113352
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T22:01:38.000Z, file: _track.qo, location(gps): 45.4979375,-73.69316797, 25.9C/0%RH, voltage: 5.18",
"created_at": "2024-04-05T22:02:00.462794Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69316797",
"temperature": "25.92",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113353/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113353
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T22:03:22.000Z, file: _track.qo, location(gps): 45.4981625,-73.69308203, 21.9C/0%RH, voltage: 5.2",
"created_at": "2024-04-05T22:03:40.696794Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981625",
"longitude": "-73.69308203",
"temperature": "21.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113354/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113354
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T22:17:27.000Z, file: _track.qo, location(gps): 45.4981625,-73.69308203, 21.6C/0%RH, voltage: 5.2",
"created_at": "2024-04-05T22:17:48.240879Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981625",
"longitude": "-73.69308203",
"temperature": "21.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113355/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113355
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.906days 2023-07-13T00:48:49Z 21C 70F, 40%RH, now: 2024-04-05T22:33:11Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T22:33:46.554330Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87987518",
"longitude": "-86.08238983",
"temperature": "21.35",
"humidity": "39.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113356/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113356
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T22:39:17.000Z, file: _track.qo, where_when: 2024-04-05T21:10:00.000Z, location(gps): 39.8800875,-86.08257422, 21.2C/40%RH, voltage: 5.41",
"created_at": "2024-04-05T22:39:41.841337Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800875",
"longitude": "-86.08257422",
"temperature": "21.22",
"humidity": "40.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113358/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113358
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T22:09:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.9C/39.1%RH, voltage: 5.39",
"created_at": "2024-04-05T22:57:16.061270Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.85",
"humidity": "39.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113359/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113359
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T22:54:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.7C/39.3%RH, voltage: 5.39",
"created_at": "2024-04-05T22:57:16.255673Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.73",
"humidity": "39.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113360/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113360
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 268.386days 2023-07-12T13:44:32Z 19C 66F, 43%RH, now: 2024-04-05T23:00:25Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-04-05T23:01:17.718036Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88013458",
"longitude": "-86.08236694",
"temperature": "19.01",
"humidity": "43.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113361/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113361
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T23:01:45.000Z, file: _track.qo, location(gps): 45.4979375,-73.69316797, 22.4C/0%RH, voltage: 5.25",
"created_at": "2024-04-05T23:01:59.849757Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69316797",
"temperature": "22.36",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113362/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113362
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-04-05T23:04:13.000Z, file: _track.qo, location(gps): 45.4983825,-73.69338672, 26.2C/0%RH, voltage: 5.17",
"created_at": "2024-04-05T23:04:33.493265Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983825",
"longitude": "-73.69338672",
"temperature": "26.23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113363/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113363
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-04-05T23:16:41.000Z, file: _track.qo, where_when: 2024-04-05T23:16:40.000Z, location(gps): 39.8797025,-86.08219922, 21.7C/40.2%RH, voltage: 5.35",
"created_at": "2024-04-05T23:17:14.625750Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8797025",
"longitude": "-86.08219922",
"temperature": "21.7",
"humidity": "40.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113364/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113364
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-04-05T23:17:34.000Z, file: _track.qo, location(gps): 45.4981625,-73.69308203, 21C/0%RH, voltage: 5.2",
"created_at": "2024-04-05T23:17:53.250200Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981625",
"longitude": "-73.69308203",
"temperature": "21",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113365/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113365
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T22:30:31.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.8C/0%RH, voltage: 5.22",
"created_at": "2024-04-05T23:30:56.783481Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113366/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113366
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-04-05T23:30:39.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.2C/0%RH, voltage: 5.23",
"created_at": "2024-04-05T23:30:56.974706Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113367/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113367
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 267.948days 2023-07-13T00:48:49Z 21C 70F, 41%RH, now: 2024-04-05T23:33:12Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-04-05T23:33:45.968642Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08229828",
"temperature": "21.21",
"humidity": "40.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113368/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113368
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-04-05T23:39:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.7C/39.7%RH, voltage: 5.39",
"created_at": "2024-04-05T23:57:17.048146Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.67",
"humidity": "39.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/113370/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 113370
}
]
}