GET /api/v1/reports/?format=api&ordering=created_at&page=2760
HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 138001,
    "next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=2761",
    "previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=created_at&page=2759",
    "results": [
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.25,'time':1760629525,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-24T15:16:41.726506Z",
            "received_by_notehub": "2025-10-24T15:16:41.415000Z",
            "when_captured_by_device": "2025-10-24T15:16:22Z",
            "best_location_when": "2025-10-16T15:45:25Z",
            "best_location_type": "gps",
            "latitude": "45.4977275",
            "longitude": "-73.69337109",
            "temperature": "22.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208027/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T15:16:40Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-16T15:45:25Z",
            "id": 208027
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':33.25,'pressure':100073.25,'status':'heartbeat','temperature':20.8125,'time':1761257380,'voltage':3.8613281}",
            "created_at": "2025-10-24T15:36:25.594066Z",
            "received_by_notehub": "2025-10-24T15:36:25.408000Z",
            "when_captured_by_device": "2025-10-24T15:36:07Z",
            "best_location_when": "2025-10-24T15:21:31Z",
            "best_location_type": "gps",
            "latitude": "39.8577725",
            "longitude": "-86.09676172",
            "temperature": "20.81",
            "humidity": "33.25",
            "pressure": "100073.2",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208028/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8613281",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T15:36:24Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-23T22:09:40Z",
            "id": 208028
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':38.75,'pressure':100059.375,'status':'heartbeat','temperature':19.65625,'time':1761080830,'voltage':4.3085938}",
            "created_at": "2025-10-24T15:52:09.394800Z",
            "received_by_notehub": "2025-10-24T15:52:09.204000Z",
            "when_captured_by_device": "2025-10-24T15:51:51Z",
            "best_location_when": "2025-10-24T15:36:55Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "19.66",
            "humidity": "38.75",
            "pressure": "100059.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208029/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3085938",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T15:52:08Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208029
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':79.875,'pressure':100147.92,'status':'heartbeat','temperature':11.6015625,'time':1761313753,'voltage':3.7480469}",
            "created_at": "2025-10-24T15:52:10.932454Z",
            "received_by_notehub": "2025-10-24T15:52:10.739000Z",
            "when_captured_by_device": "2025-10-24T15:51:49Z",
            "best_location_when": "2025-10-24T15:48:05Z",
            "best_location_type": "gps",
            "latitude": "50.6312225",
            "longitude": "3.08480859",
            "temperature": "11.6",
            "humidity": "79.88",
            "pressure": "100147.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208030/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7480469",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T15:52:10Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T13:49:13Z",
            "id": 208030
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.6875,'time':1760629525,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-24T16:16:49.029441Z",
            "received_by_notehub": "2025-10-24T16:16:48.699000Z",
            "when_captured_by_device": "2025-10-24T16:16:30Z",
            "best_location_when": "2025-10-16T15:45:25Z",
            "best_location_type": "gps",
            "latitude": "45.4977275",
            "longitude": "-73.69337109",
            "temperature": "22.69",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208031/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T16:16:48Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-16T15:45:25Z",
            "id": 208031
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':34.28125,'pressure':100110.91,'status':'heartbeat','temperature':20.796875,'time':1761257380,'voltage':3.8730469}",
            "created_at": "2025-10-24T16:38:53.791379Z",
            "received_by_notehub": "2025-10-24T16:38:53.594000Z",
            "when_captured_by_device": "2025-10-24T16:38:35Z",
            "best_location_when": "2025-10-24T16:23:55Z",
            "best_location_type": "gps",
            "latitude": "39.8577725",
            "longitude": "-86.09676172",
            "temperature": "20.8",
            "humidity": "34.28",
            "pressure": "100110.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208032/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8730469",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T16:38:53Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-23T22:09:40Z",
            "id": 208032
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':1,'seconds':90,'status':'no-sat','temperature':22.1875,'time':1760629525,'usb':true,'voltage':5.1953125}",
            "created_at": "2025-10-24T16:45:00.146388Z",
            "received_by_notehub": "2025-10-24T16:44:59.814000Z",
            "when_captured_by_device": "2025-10-24T16:44:40Z",
            "best_location_when": "2025-10-16T15:45:25Z",
            "best_location_type": "gps",
            "latitude": "45.4977275",
            "longitude": "-73.69337109",
            "temperature": "22.19",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208033/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1953125",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T16:44:59Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-16T15:45:25Z",
            "id": 208033
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':86.4375,'pressure':100161.62,'status':'heartbeat','temperature':9.4140625,'time':1761313753,'voltage':3.7441406}",
            "created_at": "2025-10-24T16:53:07.171899Z",
            "received_by_notehub": "2025-10-24T16:53:06.977000Z",
            "when_captured_by_device": "2025-10-24T16:52:45Z",
            "best_location_when": "2025-10-24T16:49:21Z",
            "best_location_type": "gps",
            "latitude": "50.6312225",
            "longitude": "3.08480859",
            "temperature": "9.41",
            "humidity": "86.44",
            "pressure": "100161.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208034/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7441406",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T16:53:06Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T13:49:13Z",
            "id": 208034
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':35.03125,'pressure':100101.55,'status':'heartbeat','temperature':22.09375,'time':1761080830,'voltage':4.3046875}",
            "created_at": "2025-10-24T16:54:41.077309Z",
            "received_by_notehub": "2025-10-24T16:54:40.894000Z",
            "when_captured_by_device": "2025-10-24T16:54:23Z",
            "best_location_when": "2025-10-24T16:39:27Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "22.09",
            "humidity": "35.03",
            "pressure": "100101.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208035/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T16:54:40Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208035
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1761326280,'motion':1,'seconds':91,'status':'no-sat','temperature':23.0625,'time':1760629525,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-24T17:19:49.692569Z",
            "received_by_notehub": "2025-10-24T17:19:49.435000Z",
            "when_captured_by_device": "2025-10-24T17:19:31Z",
            "best_location_when": "2025-10-16T15:45:25Z",
            "best_location_type": "gps",
            "latitude": "45.4977275",
            "longitude": "-73.69337109",
            "temperature": "23.06",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208036/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T17:19:48Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-16T15:45:25Z",
            "id": 208036
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':28.796875,'pressure':100066.336,'status':'heartbeat','temperature':22.8125,'time':1761257380,'voltage':3.8828125}",
            "created_at": "2025-10-24T17:41:09.426669Z",
            "received_by_notehub": "2025-10-24T17:41:09.237000Z",
            "when_captured_by_device": "2025-10-24T17:40:51Z",
            "best_location_when": "2025-10-24T17:26:27Z",
            "best_location_type": "gps",
            "latitude": "39.8577725",
            "longitude": "-86.09676172",
            "temperature": "22.81",
            "humidity": "28.8",
            "pressure": "100066.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208037/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8828125",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T17:41:08Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-23T22:09:40Z",
            "id": 208037
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':95.3125,'pressure':100140.11,'status':'heartbeat','temperature':8.6484375,'time':1761313753,'voltage':3.7324219}",
            "created_at": "2025-10-24T17:54:10.699578Z",
            "received_by_notehub": "2025-10-24T17:54:10.521000Z",
            "when_captured_by_device": "2025-10-24T17:53:49Z",
            "best_location_when": "2025-10-24T17:50:13Z",
            "best_location_type": "gps",
            "latitude": "50.6312225",
            "longitude": "3.08480859",
            "temperature": "8.65",
            "humidity": "95.31",
            "pressure": "100140.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208038/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.7324219",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T17:54:09Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T13:49:13Z",
            "id": 208038
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':30.78125,'pressure':100039.6,'status':'heartbeat','temperature':22.4375,'time':1761080830,'voltage':4.3046875}",
            "created_at": "2025-10-24T17:57:01.239487Z",
            "received_by_notehub": "2025-10-24T17:57:01.040000Z",
            "when_captured_by_device": "2025-10-24T17:56:43Z",
            "best_location_when": "2025-10-24T17:41:59Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "22.44",
            "humidity": "30.78",
            "pressure": "100039.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208039/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T17:57:00Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208039
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.75,'time':1760629525,'usb':true,'voltage':5.1953125}",
            "created_at": "2025-10-24T18:19:57.408367Z",
            "received_by_notehub": "2025-10-24T18:19:57.057000Z",
            "when_captured_by_device": "2025-10-24T18:19:38Z",
            "best_location_when": "2025-10-16T15:45:25Z",
            "best_location_type": "gps",
            "latitude": "45.4977275",
            "longitude": "-73.69337109",
            "temperature": "22.75",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208040/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1953125",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T18:19:56Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-16T15:45:25Z",
            "id": 208040
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':1.4003906,'humidity':27.53125,'motion':1,'pressure':99997.516,'seconds':29,'temperature':22.546875,'time':1761331176,'voltage':3.7910156}",
            "created_at": "2025-10-24T18:41:31.928260Z",
            "received_by_notehub": "2025-10-24T18:41:31.713000Z",
            "when_captured_by_device": "2025-10-24T18:39:36Z",
            "best_location_when": "2025-10-24T18:39:36Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "22.55",
            "humidity": "27.53",
            "pressure": "99997.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208041/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.7910156",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T18:41:31Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208041
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1761331825,'motion':2,'seconds':90,'status':'no-sat','temperature':22.75,'time':1760629525,'usb':true,'voltage':5.125}",
            "created_at": "2025-10-24T18:52:32.315863Z",
            "received_by_notehub": "2025-10-24T18:52:31.994000Z",
            "when_captured_by_device": "2025-10-24T18:52:07Z",
            "best_location_when": "2025-10-16T15:45:25Z",
            "best_location_type": "gps",
            "latitude": "45.4977275",
            "longitude": "-73.69337109",
            "temperature": "22.75",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208042/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.125",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T18:52:31Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-16T15:45:25Z",
            "id": 208042
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':3.0996094,'humidity':100,'jcount':1,'journey':1761330876,'motion':2,'pressure':100173.016,'seconds':49,'temperature':8.234375,'time':1761330938,'voltage':3.703125}",
            "created_at": "2025-10-24T18:54:33.680740Z",
            "received_by_notehub": "2025-10-24T18:54:33.494000Z",
            "when_captured_by_device": "2025-10-24T18:35:40Z",
            "best_location_when": "2025-10-24T18:35:38Z",
            "best_location_type": "gps",
            "latitude": "50.6310575",
            "longitude": "3.08573047",
            "temperature": "8.23",
            "humidity": "100",
            "pressure": "100173",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208043/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.703125",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T18:54:32Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T18:35:38Z",
            "id": 208043
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':28.640625,'pressure':99947.31,'status':'heartbeat','temperature':23.34375,'time':1761080830,'voltage':4.3007812}",
            "created_at": "2025-10-24T18:58:16.945177Z",
            "received_by_notehub": "2025-10-24T18:58:16.733000Z",
            "when_captured_by_device": "2025-10-24T18:57:59Z",
            "best_location_when": "2025-10-24T18:44:19Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "23.34",
            "humidity": "28.64",
            "pressure": "99947.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208044/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3007812",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T18:58:15Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208044
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'bearing':9.1901,'distance':59.455574,'dop':2,'jcount':2,'journey':1761331825,'motion':3,'seconds':703734,'temperature':23.375,'time':1761333259,'usb':true,'velocity':0.000084485866,'v",
            "created_at": "2025-10-24T19:14:43.419302Z",
            "received_by_notehub": "2025-10-24T19:14:43.079000Z",
            "when_captured_by_device": "2025-10-24T19:14:19Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "23.38",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208045/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1210938",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T19:14:42Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208045
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':25.015625,'pressure':99939.85,'status':'heartbeat','temperature':22.1875,'time':1761331176,'voltage':3.8789062}",
            "created_at": "2025-10-24T19:42:17.337950Z",
            "received_by_notehub": "2025-10-24T19:42:17.141000Z",
            "when_captured_by_device": "2025-10-24T19:41:59Z",
            "best_location_when": "2025-10-24T19:39:11Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "22.19",
            "humidity": "25.02",
            "pressure": "99939.8",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208046/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8789062",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T19:42:16Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208046
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':100126.93,'status':'heartbeat','temperature':7.703125,'time':1761330938,'voltage':3.6953125}",
            "created_at": "2025-10-24T19:55:02.256589Z",
            "received_by_notehub": "2025-10-24T19:55:01.985000Z",
            "when_captured_by_device": "2025-10-24T19:36:41Z",
            "best_location_when": "2025-10-24T19:27:09Z",
            "best_location_type": "gps",
            "latitude": "50.6310575",
            "longitude": "3.08573047",
            "temperature": "7.7",
            "humidity": "100",
            "pressure": "100126.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208047/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6953125",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T19:55:01Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T18:35:38Z",
            "id": 208047
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'dop':2.4003906,'humidity':100,'motion':1,'pressure':100121.14,'seconds':114,'temperature':7.5625,'time':1761335395,'voltage':3.6777344}",
            "created_at": "2025-10-24T19:55:02.460302Z",
            "received_by_notehub": "2025-10-24T19:55:01.992000Z",
            "when_captured_by_device": "2025-10-24T19:49:58Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "7.56",
            "humidity": "100",
            "pressure": "100121.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208048/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6777344",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T19:55:01Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208048
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'jcount':1,'journey':1761335778,'motion':1,'seconds':91,'status':'no-sat','temperature':23.125,'time':1761333259,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-24T19:58:09.099221Z",
            "received_by_notehub": "2025-10-24T19:58:08.781000Z",
            "when_captured_by_device": "2025-10-24T19:57:49Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "23.12",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208049/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T19:58:08Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208049
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':26.765625,'pressure':99917.3,'status':'heartbeat','temperature':24.71875,'time':1761080830,'voltage':4.3085938}",
            "created_at": "2025-10-24T19:59:32.426536Z",
            "received_by_notehub": "2025-10-24T19:59:32.227000Z",
            "when_captured_by_device": "2025-10-24T19:59:15Z",
            "best_location_when": "2025-10-24T19:45:39Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "24.72",
            "humidity": "26.77",
            "pressure": "99917.3",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208050/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3085938",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T19:59:31Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208050
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':31.46875,'pressure':99933.516,'status':'heartbeat','temperature':20.046875,'time':1761331176,'voltage':3.8769531}",
            "created_at": "2025-10-24T20:43:17.275007Z",
            "received_by_notehub": "2025-10-24T20:43:17.086000Z",
            "when_captured_by_device": "2025-10-24T20:42:59Z",
            "best_location_when": "2025-10-24T20:39:35Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "20.05",
            "humidity": "31.47",
            "pressure": "99933.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208051/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8769531",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T20:43:16Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208051
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'jcount':1,'journey':1761338209,'motion':1,'pressure':100082.57,'seconds':91,'status':'no-sat','temperature':7.6914062,'time':1761335395,'voltage':3.640625}",
            "created_at": "2025-10-24T20:55:24.199616Z",
            "received_by_notehub": "2025-10-24T20:55:24.016000Z",
            "when_captured_by_device": "2025-10-24T20:39:21Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "7.69",
            "humidity": "100",
            "pressure": "100082.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208052/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.640625",
            "t_lat": "50.635261",
            "t_lon": "3.088048",
            "t_when": "2025-10-24T20:55:23Z",
            "t_loc": "Lille Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208052
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':23.375,'time':1761333259,'usb':true,'voltage':5.1953125}",
            "created_at": "2025-10-24T20:58:17.370954Z",
            "received_by_notehub": "2025-10-24T20:58:17.115000Z",
            "when_captured_by_device": "2025-10-24T20:57:58Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "23.38",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208053/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1953125",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T20:58:16Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208053
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':32.8125,'pressure':99903.61,'status':'heartbeat','temperature':19.140625,'time':1761080830,'voltage':4.3046875}",
            "created_at": "2025-10-24T21:01:36.809992Z",
            "received_by_notehub": "2025-10-24T21:01:36.617000Z",
            "when_captured_by_device": "2025-10-24T21:01:19Z",
            "best_location_when": "2025-10-24T20:46:51Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "19.14",
            "humidity": "32.81",
            "pressure": "99903.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208054/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.3046875",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T21:01:35Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208054
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':44.15625,'pressure':99987.484,'status':'heartbeat','temperature':13.84375,'time':1761331176,'voltage':3.859375}",
            "created_at": "2025-10-24T21:44:16.779738Z",
            "received_by_notehub": "2025-10-24T21:44:16.571000Z",
            "when_captured_by_device": "2025-10-24T21:43:59Z",
            "best_location_when": "2025-10-24T21:40:35Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "13.84",
            "humidity": "44.16",
            "pressure": "99987.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208055/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.859375",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T21:44:15Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208055
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':100051.45,'status':'heartbeat','temperature':7.7617188,'time':1761335395,'voltage':3.640625}",
            "created_at": "2025-10-24T21:55:46.064066Z",
            "received_by_notehub": "2025-10-24T21:55:45.880000Z",
            "when_captured_by_device": "2025-10-24T21:40:33Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "7.76",
            "humidity": "100",
            "pressure": "100051.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208056/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.640625",
            "t_lat": "50.633347",
            "t_lon": "3.075436",
            "t_when": "2025-10-24T21:55:45Z",
            "t_loc": "Lille Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208056
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':23.1875,'time':1761333259,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-24T21:58:25.278851Z",
            "received_by_notehub": "2025-10-24T21:58:25.016000Z",
            "when_captured_by_device": "2025-10-24T21:58:06Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "23.19",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208057/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T21:58:24Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208057
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':41.375,'pressure':99934.875,'status':'heartbeat','temperature':13.2265625,'time':1761080830,'voltage':4.296875}",
            "created_at": "2025-10-24T22:02:36.546435Z",
            "received_by_notehub": "2025-10-24T22:02:36.356000Z",
            "when_captured_by_device": "2025-10-24T22:02:19Z",
            "best_location_when": "2025-10-24T21:48:51Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "13.23",
            "humidity": "41.38",
            "pressure": "99934.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208058/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.296875",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T22:02:35Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208058
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':58.78125,'pressure':100012.82,'status':'heartbeat','temperature':8.5703125,'time':1761331176,'voltage':3.8535156}",
            "created_at": "2025-10-24T22:46:40.839865Z",
            "received_by_notehub": "2025-10-24T22:46:40.628000Z",
            "when_captured_by_device": "2025-10-24T22:46:23Z",
            "best_location_when": "2025-10-24T22:41:35Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "8.57",
            "humidity": "58.78",
            "pressure": "100012.8",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208059/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8535156",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-24T22:46:39Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208059
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99982.97,'status':'heartbeat','temperature':7.7304688,'time':1761335395,'voltage':3.6289062}",
            "created_at": "2025-10-24T22:56:07.131894Z",
            "received_by_notehub": "2025-10-24T22:56:06.939000Z",
            "when_captured_by_device": "2025-10-24T22:42:01Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "7.73",
            "humidity": "100",
            "pressure": "99983",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208060/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6289062",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-24T22:56:06Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208060
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.6875,'time':1761333259,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-24T22:58:33.308742Z",
            "received_by_notehub": "2025-10-24T22:58:32.899000Z",
            "when_captured_by_device": "2025-10-24T22:58:14Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "22.69",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208061/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T22:58:32Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208061
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':63.5625,'pressure':99958.11,'status':'heartbeat','temperature':7.859375,'time':1761080830,'voltage':4.2890625}",
            "created_at": "2025-10-24T23:03:36.301504Z",
            "received_by_notehub": "2025-10-24T23:03:36.105000Z",
            "when_captured_by_device": "2025-10-24T23:03:19Z",
            "best_location_when": "2025-10-24T22:49:55Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "7.86",
            "humidity": "63.56",
            "pressure": "99958.1",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208062/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2890625",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T23:03:35Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208062
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':74,'pressure':100037.36,'status':'heartbeat','temperature':4.6210938,'time':1761331176,'voltage':3.8320312}",
            "created_at": "2025-10-24T23:47:25.114371Z",
            "received_by_notehub": "2025-10-24T23:47:24.938000Z",
            "when_captured_by_device": "2025-10-24T23:47:07Z",
            "best_location_when": "2025-10-24T23:43:59Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "4.62",
            "humidity": "74",
            "pressure": "100037.4",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208063/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8320312",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-24T23:47:24Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208063
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99956.6,'status':'heartbeat','temperature':7.8007812,'time':1761335395,'voltage':3.6230469}",
            "created_at": "2025-10-24T23:56:31.088505Z",
            "received_by_notehub": "2025-10-24T23:56:30.897000Z",
            "when_captured_by_device": "2025-10-24T23:43:37Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "7.8",
            "humidity": "100",
            "pressure": "99956.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208064/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6230469",
            "t_lat": "50.633347",
            "t_lon": "3.075436",
            "t_when": "2025-10-24T23:56:29Z",
            "t_loc": "Lille Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208064
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power OFF {usb-disabled}','voltage':4.1953125}",
            "created_at": "2025-10-24T23:56:55.435980Z",
            "received_by_notehub": "2025-10-24T23:56:55.158000Z",
            "when_captured_by_device": "2025-10-24T23:56:15Z",
            "best_location_when": "2025-10-24T23:56:54Z",
            "best_location_type": "tower",
            "latitude": "19.468303",
            "longitude": "-71.359904",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208065/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.1953125",
            "t_lat": "19.468303",
            "t_lon": "-71.359904",
            "t_when": "2025-10-24T23:56:54Z",
            "t_loc": "San Ignacio de Sabaneta Santiago Rodríguez",
            "t_country": "DO",
            "t_id": "",
            "t_tz": "America/Santo_Domingo",
            "gpsfix_time": null,
            "id": 208065
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_health.qo",
            "uptime": "body: {'text':'USB power ON {usb-enabled}','voltage':5.015625}",
            "created_at": "2025-10-24T23:56:55.582855Z",
            "received_by_notehub": "2025-10-24T23:56:55.166000Z",
            "when_captured_by_device": "2025-10-24T23:56:49Z",
            "best_location_when": "2025-10-24T23:56:54Z",
            "best_location_type": "tower",
            "latitude": "19.468303",
            "longitude": "-71.359904",
            "temperature": "",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208066/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.015625",
            "t_lat": "19.468303",
            "t_lon": "-71.359904",
            "t_when": "2025-10-24T23:56:54Z",
            "t_loc": "San Ignacio de Sabaneta Santiago Rodríguez",
            "t_country": "DO",
            "t_id": "",
            "t_tz": "America/Santo_Domingo",
            "gpsfix_time": null,
            "id": 208066
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'motion':4,'status':'usb','temperature':28.25,'voltage':4.203125}",
            "created_at": "2025-10-24T23:56:55.687486Z",
            "received_by_notehub": "2025-10-24T23:56:55.639000Z",
            "when_captured_by_device": "2025-10-24T23:56:17Z",
            "best_location_when": "2025-10-24T23:56:54Z",
            "best_location_type": "tower",
            "latitude": "19.468303",
            "longitude": "-71.359904",
            "temperature": "28.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208067/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "4.203125",
            "t_lat": "19.468303",
            "t_lon": "-71.359904",
            "t_when": "2025-10-24T23:56:54Z",
            "t_loc": "San Ignacio de Sabaneta Santiago Rodríguez",
            "t_country": "DO",
            "t_id": "",
            "t_tz": "America/Santo_Domingo",
            "gpsfix_time": null,
            "id": 208067
        },
        {
            "arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'usb','temperature':28.25,'usb':true,'voltage':5.0078125}",
            "created_at": "2025-10-24T23:56:55.774899Z",
            "received_by_notehub": "2025-10-24T23:56:55.641000Z",
            "when_captured_by_device": "2025-10-24T23:56:50Z",
            "best_location_when": "2025-10-24T23:56:54Z",
            "best_location_type": "tower",
            "latitude": "19.468303",
            "longitude": "-71.359904",
            "temperature": "28.25",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208068/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
            "voltage": "5.0078125",
            "t_lat": "19.468303",
            "t_lon": "-71.359904",
            "t_when": "2025-10-24T23:56:54Z",
            "t_loc": "San Ignacio de Sabaneta Santiago Rodríguez",
            "t_country": "DO",
            "t_id": "",
            "t_tz": "America/Santo_Domingo",
            "gpsfix_time": null,
            "id": 208068
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.8125,'time':1761333259,'usb':true,'voltage':5.203125}",
            "created_at": "2025-10-24T23:58:41.335524Z",
            "received_by_notehub": "2025-10-24T23:58:41.010000Z",
            "when_captured_by_device": "2025-10-24T23:58:22Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "22.81",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208069/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.203125",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-24T23:58:40Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208069
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':85.8125,'pressure':99968.92,'status':'heartbeat','temperature':4.703125,'time':1761080830,'voltage':4.2851562}",
            "created_at": "2025-10-25T00:04:20.622712Z",
            "received_by_notehub": "2025-10-25T00:04:20.417000Z",
            "when_captured_by_device": "2025-10-25T00:04:03Z",
            "best_location_when": "2025-10-24T23:50:55Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "4.7",
            "humidity": "85.81",
            "pressure": "99968.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208070/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2851562",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-25T00:04:19Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208070
        },
        {
            "arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e  john",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':94.5625,'pressure':100080.73,'status':'heartbeat','temperature':2.8945312,'time':1761331176,'voltage':3.8125}",
            "created_at": "2025-10-25T00:48:08.621688Z",
            "received_by_notehub": "2025-10-25T00:48:08.443000Z",
            "when_captured_by_device": "2025-10-25T00:47:51Z",
            "best_location_when": "2025-10-25T00:44:47Z",
            "best_location_type": "gps",
            "latitude": "39.8576725",
            "longitude": "-86.09665234",
            "temperature": "2.89",
            "humidity": "94.56",
            "pressure": "100080.7",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208071/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
            "voltage": "3.8125",
            "t_lat": "39.856649",
            "t_lon": "-86.090108",
            "t_when": "2025-10-25T00:48:07Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-24T18:39:36Z",
            "id": 208071
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99891.625,'status':'heartbeat','temperature':7.8320312,'time':1761335395,'voltage':3.6132812}",
            "created_at": "2025-10-25T00:56:54.519151Z",
            "received_by_notehub": "2025-10-25T00:56:54.338000Z",
            "when_captured_by_device": "2025-10-25T00:45:13Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "7.83",
            "humidity": "100",
            "pressure": "99891.6",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208072/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6132812",
            "t_lat": "50.649472",
            "t_lon": "3.074847",
            "t_when": "2025-10-25T00:56:53Z",
            "t_loc": "La Madeleine Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208072
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.5625,'time':1761333259,'usb':true,'voltage':5.203125}",
            "created_at": "2025-10-25T00:58:48.529028Z",
            "received_by_notehub": "2025-10-25T00:58:48.182000Z",
            "when_captured_by_device": "2025-10-25T00:58:30Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "22.56",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208073/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.203125",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-25T00:58:47Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208073
        },
        {
            "arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':100013.54,'status':'heartbeat','temperature':3.0566406,'time':1761080830,'voltage':4.2851562}",
            "created_at": "2025-10-25T01:05:52.538494Z",
            "received_by_notehub": "2025-10-25T01:05:52.335000Z",
            "when_captured_by_device": "2025-10-25T01:05:35Z",
            "best_location_when": "2025-10-25T00:51:39Z",
            "best_location_type": "gps",
            "latitude": "39.8576375",
            "longitude": "-86.09633203",
            "temperature": "3.06",
            "humidity": "100",
            "pressure": "100013.5",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208074/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
            "voltage": "4.2851562",
            "t_lat": "39.856893",
            "t_lon": "-86.102464",
            "t_when": "2025-10-25T01:05:51Z",
            "t_loc": "Indianapolis Indiana",
            "t_country": "US",
            "t_id": "",
            "t_tz": "America/Indiana/Indianapolis",
            "gpsfix_time": "2025-10-21T21:07:10Z",
            "id": 208074
        },
        {
            "arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
            "which_file": "_track.qo",
            "uptime": "body: {'humidity':100,'pressure':99799.91,'status':'heartbeat','temperature':8.1015625,'time':1761335395,'voltage':3.6015625}",
            "created_at": "2025-10-25T01:57:18.160899Z",
            "received_by_notehub": "2025-10-25T01:57:17.974000Z",
            "when_captured_by_device": "2025-10-25T01:46:49Z",
            "best_location_when": "2025-10-24T19:49:55Z",
            "best_location_type": "gps",
            "latitude": "50.6313675",
            "longitude": "3.08608203",
            "temperature": "8.1",
            "humidity": "100",
            "pressure": "99799.9",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208075/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
            "voltage": "3.6015625",
            "t_lat": "50.633347",
            "t_lon": "3.075436",
            "t_when": "2025-10-25T01:57:17Z",
            "t_loc": "Lille Hauts-de-France",
            "t_country": "FR",
            "t_id": "",
            "t_tz": "Europe/Paris",
            "gpsfix_time": "2025-10-24T19:49:55Z",
            "id": 208075
        },
        {
            "arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
            "which_file": "_track.qo",
            "uptime": "body: {'status':'heartbeat','temperature':22.5,'time':1761333259,'usb':true,'voltage':5.1992188}",
            "created_at": "2025-10-25T01:58:57.230977Z",
            "received_by_notehub": "2025-10-25T01:58:56.813000Z",
            "when_captured_by_device": "2025-10-25T01:58:38Z",
            "best_location_when": "2025-10-24T19:14:19Z",
            "best_location_type": "gps",
            "latitude": "45.4982525",
            "longitude": "-73.69324609",
            "temperature": "22.5",
            "humidity": "",
            "pressure": "",
            "url": "http://arduino.johnedstone.net/api/v1/reports/208076/?format=api",
            "arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
            "voltage": "5.1992188",
            "t_lat": "45.494081",
            "t_lon": "-73.688248",
            "t_when": "2025-10-25T01:58:56Z",
            "t_loc": "Montreal Quebec",
            "t_country": "CA",
            "t_id": "",
            "t_tz": "America/Toronto",
            "gpsfix_time": "2025-10-24T19:14:19Z",
            "id": 208076
        }
    ]
}