HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 158954,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-id&page=923",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-id&page=921",
"results": [
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:40:01.000Z, why: accelerometer IO errors: 5/17 2b 2a 29 28 06 2b 2a 29 28 04 2b 2a 2b 2a 29 28 01 , location(gps): 50.6310225,3.08524609, voltage: 5.19",
"created_at": "2024-07-27T08:40:14.141302Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136249/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136249
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:39:57.000Z, why: USB power ON {usb-enabled}, location(gps): 50.6310225,3.08524609, voltage: 5.1",
"created_at": "2024-07-27T08:40:13.678777Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136248/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136248
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:38:56.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 27.4C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T08:39:47.977763Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "27.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136247/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136247
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:38:54.000Z, why: USB power OFF {usb-disabled}, location(gps): 50.6310225,3.08524609, voltage: 4.2",
"created_at": "2024-07-27T08:39:47.682557Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136246/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136246
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:34:53.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 27.4C/0%RH, voltage: 5.22",
"created_at": "2024-07-27T08:35:09.599298Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "27.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136245/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136245
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T08:15:40.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.4C/0%RH, voltage: 4.2",
"created_at": "2024-07-27T08:16:02.871973Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136244/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136244
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:14:25.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.1C/0%RH, voltage: 5.14",
"created_at": "2024-07-27T08:14:38.241914Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136243/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136243
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T08:14:23.000Z, why: USB power ON {usb-enabled}, location(gps): 50.6310225,3.08524609, voltage: 5.07",
"created_at": "2024-07-27T08:14:37.925702Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136242/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136242
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T08:13:34.000Z, file: _track.qo, location(gps): 45.4981325,-73.69346484, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T08:13:56.156764Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981325",
"longitude": "-73.69346484",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136241/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136241
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T07:57:02.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.1C/0%RH, voltage: 4.19",
"created_at": "2024-07-27T07:57:39.508950Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136240/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136240
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T07:57:14.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.1C/53.2%RH, voltage: 5.42",
"created_at": "2024-07-27T07:57:37.002245Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.06",
"humidity": "53.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136239/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136239
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T07:52:41.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.3C/51.2%RH, voltage: 4.21",
"created_at": "2024-07-27T07:57:30.227688Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.28",
"humidity": "51.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136238/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136238
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T07:07:41.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.3C/50.9%RH, voltage: 4.21",
"created_at": "2024-07-27T07:57:29.997011Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.3",
"humidity": "50.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136237/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136237
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.756days 2023-07-12T13:44:32Z 29C 83F, 45%RH, now: 2024-07-27T07:53:17Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T07:54:09.185289Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.60",
"humidity": "44.51",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136236/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136236
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.294days 2023-07-13T00:48:49Z 24C 76F, 54%RH, now: 2024-07-27T07:52:03Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T07:52:37.550024Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.31",
"humidity": "54.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136235/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136235
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T07:27:01.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 24.8C/0%RH, voltage: 4.18",
"created_at": "2024-07-27T07:27:39.872664Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136234/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136234
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T07:25:08.000Z, file: _track.qo, location(gps): 45.4980025,-73.69324609, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T07:25:30.536189Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69324609",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136233/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136233
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T07:15:36.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.4C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T07:16:03.016729Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136232/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136232
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T06:22:41.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.3C/50.6%RH, voltage: 4.21",
"created_at": "2024-07-27T06:57:34.240692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.27",
"humidity": "50.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136231/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136231
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T06:57:06.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.2C/52.8%RH, voltage: 5.42",
"created_at": "2024-07-27T06:57:31.277678Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.2",
"humidity": "52.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136230/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136230
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.714days 2023-07-12T13:44:32Z 28C 83F, 43%RH, now: 2024-07-27T06:53:12Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T06:54:07.702025Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.36",
"humidity": "42.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136229/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136229
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.252days 2023-07-13T00:48:49Z 25C 76F, 54%RH, now: 2024-07-27T06:52:02Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T06:52:38.260960Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.54",
"humidity": "54.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136228/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136228
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T06:36:44.000Z, file: _track.qo, location(gps): 45.4980575,-73.69332422, 27.2C/0%RH, voltage: 4.09",
"created_at": "2024-07-27T06:37:07.170435Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980575",
"longitude": "-73.69332422",
"temperature": "27.22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136227/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136227
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T06:35:37.000Z, file: _track.qo, location(gps): 45.4980625,-73.69330859, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T06:36:00.089359Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69330859",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136226/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136226
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T06:34:19.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 24.2C/0%RH, voltage: 4.18",
"created_at": "2024-07-27T06:35:09.543590Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136225/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136225
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T06:34:17.000Z, why: USB power OFF {usb-disabled}, location(gps): 50.6310225,3.08524609, voltage: 4.18",
"created_at": "2024-07-27T06:35:09.056098Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136224/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136224
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T06:30:06.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 23.9C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T06:30:22.796104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "23.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136223/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136223
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T06:15:36.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.4C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T06:15:59.378705Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136222/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136222
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T05:37:41.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.2C/50.4%RH, voltage: 4.21",
"created_at": "2024-07-27T05:57:28.847135Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.24",
"humidity": "50.37",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136221/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136221
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T05:56:58.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.4C/53.3%RH, voltage: 5.42",
"created_at": "2024-07-27T05:57:21.313473Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.38",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136220/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136220
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T05:55:31.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 24.9C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T05:55:50.791030Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136219/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136219
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.673days 2023-07-12T13:44:32Z 28C 83F, 43%RH, now: 2024-07-27T05:53:06Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T05:53:58.664875Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.41",
"humidity": "42.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136218/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136218
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.211days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-07-27T05:52:02Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T05:52:38.028019Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.76",
"humidity": "54.10",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136217/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136217
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T05:47:09.000Z, file: _track.qo, location(gps): 45.4980275,-73.69322266, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T05:47:31.943336Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980275",
"longitude": "-73.69322266",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136216/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136216
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T05:15:36.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.2C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T05:15:59.578667Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136215/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136215
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T04:58:49.000Z, file: _track.qo, location(gps): 45.4980575,-73.69334766, 24.5C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T04:59:11.400579Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980575",
"longitude": "-73.69334766",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136214/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136214
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T04:52:45.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.2C/50.1%RH, voltage: 4.21",
"created_at": "2024-07-27T04:57:29.005129Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.19",
"humidity": "50.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136213/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136213
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T04:07:45.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.1C/49.7%RH, voltage: 4.2",
"created_at": "2024-07-27T04:57:28.794614Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.1",
"humidity": "49.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136212/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136212
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T04:56:50.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.5C/53%RH, voltage: 5.42",
"created_at": "2024-07-27T04:57:13.462610Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.53",
"humidity": "52.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136211/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136211
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T04:55:23.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T04:55:39.497989Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136210/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136210
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.631days 2023-07-12T13:44:32Z 28C 83F, 43%RH, now: 2024-07-27T04:53:01Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T04:53:53.470999Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.31",
"humidity": "43.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136209/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136209
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.169days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-07-27T04:52:02Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T04:52:36.483961Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "24.88",
"humidity": "53.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136208/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136208
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T04:15:36.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.6C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T04:16:00.286545Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136207/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136207
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T04:10:12.000Z, file: _track.qo, location(gps): 45.4980425,-73.69341016, 24.7C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T04:10:35.349126Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980425",
"longitude": "-73.69341016",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136206/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136206
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T03:22:45.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23C/49.4%RH, voltage: 4.21",
"created_at": "2024-07-27T03:57:27.988868Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.97",
"humidity": "49.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136205/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136205
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T03:56:42.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.7C/53.2%RH, voltage: 5.42",
"created_at": "2024-07-27T03:57:07.693530Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.67",
"humidity": "53.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136204/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136204
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T03:55:15.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.7C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T03:55:34.053107Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136203/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136203
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.589days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-07-27T03:52:56Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T03:53:52.241839Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.33",
"humidity": "44.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136202/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136202
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.127days 2023-07-13T00:48:49Z 25C 77F, 54%RH, now: 2024-07-27T03:52:01Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T03:52:36.440465Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.19",
"humidity": "53.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136201/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136201
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T03:22:01.000Z, file: _track.qo, location(gps): 45.4979425,-73.69329297, 24.4C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T03:22:27.503588Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979425",
"longitude": "-73.69329297",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136200/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136200
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T03:15:32.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.1C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T03:16:00.211008Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136199/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136199
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T02:37:45.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.8C/49.5%RH, voltage: 4.21",
"created_at": "2024-07-27T02:57:30.952529Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.84",
"humidity": "49.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136198/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136198
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T02:56:34.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.8C/53.4%RH, voltage: 5.42",
"created_at": "2024-07-27T02:56:58.183131Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.78",
"humidity": "53.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136197/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136197
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T02:55:07.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.8C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T02:55:22.591136Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136196/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136196
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.547days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-07-27T02:52:50Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T02:53:44.547008Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.32",
"humidity": "44.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136195/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136195
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.086days 2023-07-13T00:48:49Z 25C 78F, 54%RH, now: 2024-07-27T02:52:01Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T02:52:35.646094Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.35",
"humidity": "53.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136194/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136194
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T02:33:35.000Z, file: _track.qo, location(gps): 45.4981525,-73.69337109, 24.4C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T02:33:57.524943Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981525",
"longitude": "-73.69337109",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136193/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136193
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T02:15:32.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.1C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T02:16:07.987149Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136192/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136192
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T01:52:49.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.7C/49.7%RH, voltage: 4.21",
"created_at": "2024-07-27T01:57:27.065984Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.67",
"humidity": "49.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136191/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136191
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T01:07:49.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.8C/49.6%RH, voltage: 4.2",
"created_at": "2024-07-27T01:57:26.865010Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.85",
"humidity": "49.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136190/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136190
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T01:56:26.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.8C/53.2%RH, voltage: 5.42",
"created_at": "2024-07-27T01:56:54.626413Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.83",
"humidity": "53.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136189/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136189
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T01:54:59.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.6C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T01:55:14.543277Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136188/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136188
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.506days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-07-27T01:52:45Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T01:53:37.939246Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.28",
"humidity": "44.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136187/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136187
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.044days 2023-07-13T00:48:49Z 25C 78F, 53%RH, now: 2024-07-27T01:52:01Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T01:52:36.393519Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.45",
"humidity": "53.33",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136186/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136186
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T01:44:45.000Z, file: _track.qo, location(gps): 45.4981125,-73.69323047, 24.4C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T01:45:23.325089Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981125",
"longitude": "-73.69323047",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136185/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136185
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T01:15:32.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 23.9C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T01:15:54.659539Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "23.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136184/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136184
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-27T00:22:49.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.5C/50%RH, voltage: 4.21",
"created_at": "2024-07-27T00:57:26.004593Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.5",
"humidity": "49.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136183/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136183
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T00:56:31.000Z, file: _track.qo, location(gps): 45.4980525,-73.69319141, 24.4C/0%RH, voltage: 4.11",
"created_at": "2024-07-27T00:56:54.591077Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69319141",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136182/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136182
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-27T00:56:18.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.9C/53.3%RH, voltage: 5.42",
"created_at": "2024-07-27T00:56:45.207289Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.89",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136181/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136181
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-27T00:54:50.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.3C/0%RH, voltage: 5.23",
"created_at": "2024-07-27T00:55:06.352899Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136180/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136180
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.464days 2023-07-12T13:44:32Z 29C 84F, 42%RH, now: 2024-07-27T00:52:40Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-27T00:53:33.131676Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.62",
"humidity": "42.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136179/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136179
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 380.002days 2023-07-13T00:48:49Z 26C 78F, 53%RH, now: 2024-07-27T00:52:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-27T00:52:35.711124Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.52",
"humidity": "53.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136178/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136178
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-27T00:15:32.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 23.7C/0%RH, voltage: 4.21",
"created_at": "2024-07-27T00:16:16.820536Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "23.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136177/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136177
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-27T00:08:08.000Z, file: _track.qo, location(gps): 45.4980825,-73.69364453, 24C/0%RH, voltage: 4.12",
"created_at": "2024-07-27T00:08:31.994364Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980825",
"longitude": "-73.69364453",
"temperature": "24.05",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136176/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136176
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-26T23:37:49.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.5C/50.1%RH, voltage: 4.21",
"created_at": "2024-07-26T23:57:26.016581Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.54",
"humidity": "50.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136175/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136175
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-26T23:57:07.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-26T23:57:24.319293Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136174/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136174
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-26T23:56:10.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.9C/53.2%RH, voltage: 5.42",
"created_at": "2024-07-26T23:56:35.789023Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.89",
"humidity": "53.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136173/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136173
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.422days 2023-07-12T13:44:32Z 29C 84F, 42%RH, now: 2024-07-26T23:52:34Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-26T23:53:29.013972Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.96",
"humidity": "42.10",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136172/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136172
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 379.961days 2023-07-13T00:48:49Z 26C 78F, 53%RH, now: 2024-07-26T23:52:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-26T23:52:34.467204Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.53",
"humidity": "53.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136171/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136171
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-26T23:19:08.000Z, file: _track.qo, location(gps): 45.4979875,-73.69323828, 24.4C/0%RH, voltage: 4.12",
"created_at": "2024-07-26T23:19:31.649805Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69323828",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136170/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136170
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-26T23:15:28.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 23.8C/0%RH, voltage: 4.21",
"created_at": "2024-07-26T23:15:55.481573Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "23.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136169/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136169
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-26T22:52:53.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.7C/50%RH, voltage: 4.21",
"created_at": "2024-07-26T22:57:25.041955Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.71",
"humidity": "50.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136168/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136168
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-26T22:07:53.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.8C/49.9%RH, voltage: 4.21",
"created_at": "2024-07-26T22:57:24.802415Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.78",
"humidity": "49.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136167/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136167
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-26T22:56:58.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.6C/0%RH, voltage: 5.23",
"created_at": "2024-07-26T22:57:14.039162Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136166/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136166
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-26T22:56:02.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.9C/53.8%RH, voltage: 5.42",
"created_at": "2024-07-26T22:56:30.072633Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.86",
"humidity": "53.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136165/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136165
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.381days 2023-07-12T13:44:32Z 28C 83F, 43%RH, now: 2024-07-26T22:52:29Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-26T22:53:24.291588Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "28.24",
"humidity": "42.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136164/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136164
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 379.919days 2023-07-13T00:48:49Z 25C 78F, 54%RH, now: 2024-07-26T22:52:00Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-26T22:52:34.654886Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.47",
"humidity": "53.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136163/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136163
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-26T22:30:39.000Z, file: _track.qo, location(gps): 45.4979875,-73.69329297, 24.4C/0%RH, voltage: 4.12",
"created_at": "2024-07-26T22:31:04.741584Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69329297",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136162/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136162
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-26T22:27:07.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.9C/0%RH, voltage: 5.23",
"created_at": "2024-07-26T22:27:24.911364Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136161/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136161
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-26T22:15:28.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.1C/0%RH, voltage: 4.21",
"created_at": "2024-07-26T22:16:02.024341Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136160/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136160
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-26T21:22:53.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.9C/49.9%RH, voltage: 4.21",
"created_at": "2024-07-26T21:57:24.360217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.89",
"humidity": "49.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136159/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136159
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-26T21:55:54.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.7C/54%RH, voltage: 5.42",
"created_at": "2024-07-26T21:56:19.074310Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.67",
"humidity": "54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136158/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136158
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 380.339days 2023-07-12T13:44:32Z 27C 81F, 46%RH, now: 2024-07-26T21:52:24Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-26T21:53:19.267635Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.24",
"humidity": "46.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136157/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136157
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 379.877days 2023-07-13T00:48:49Z 25C 78F, 54%RH, now: 2024-07-26T21:51:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-26T21:52:34.139951Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08250427",
"temperature": "25.31",
"humidity": "53.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136156/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136156
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-26T21:52:07.000Z, file: _track.qo, location(gps): 50.6310225,3.08524609, 25.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-26T21:52:22.537809Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310225",
"longitude": "3.08524609",
"temperature": "25.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136155/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136155
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-26T21:42:09.000Z, file: _track.qo, location(gps): 45.4980025,-73.69332422, 24.4C/0%RH, voltage: 4.12",
"created_at": "2024-07-26T21:42:38.437395Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69332422",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136154/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136154
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-26T21:15:28.000Z, file: _track.qo, location(gps): 45.4981375,-73.69339453, 24.1C/0%RH, voltage: 4.21",
"created_at": "2024-07-26T21:15:51.493586Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69339453",
"temperature": "24.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136153/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136153
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-26T20:37:53.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.9C/49.8%RH, voltage: 4.21",
"created_at": "2024-07-26T20:57:24.455681Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.86",
"humidity": "49.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136152/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136152
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-26T20:55:46.000Z, file: _track.qo, where_when: 2024-07-20T22:10:40.000Z, location(gps): 39.8799275,-86.08240234, 24.5C/54.2%RH, voltage: 5.42",
"created_at": "2024-07-26T20:56:10.814519Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799275",
"longitude": "-86.08240234",
"temperature": "24.45",
"humidity": "54.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136151/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136151
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-26T20:53:24.000Z, file: _track.qo, location(gps): 45.4980275,-73.69344141, 24.4C/0%RH, voltage: 4.12",
"created_at": "2024-07-26T20:53:46.002157Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980275",
"longitude": "-73.69344141",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/136150/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 136150
}
]
}