HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 160658,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-id&page=1104",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-id&page=1102",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T19:56:25.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.8C/49%RH, voltage: 5.39",
"created_at": "2024-05-04T19:57:14.723518Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.84",
"humidity": "49.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119746/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119746
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T19:11:26.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 22.6C/49.5%RH, voltage: 5.39",
"created_at": "2024-05-04T19:57:14.549363Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "22.62",
"humidity": "49.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119745/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119745
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T19:47:49.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 24.3C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T19:48:06.309048Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119744/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119744
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T19:46:10.000Z, file: _track.qo, location(gps): 45.4982175,-73.69337109, 27.7C/0%RH, voltage: 5.17",
"created_at": "2024-05-04T19:46:29.657892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982175",
"longitude": "-73.69337109",
"temperature": "27.66",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119743/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119743
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T19:45:44.000Z, file: _track.qo, where_when: 2024-05-04T18:55:51.000Z, location(gps): 39.8800775,-86.08237891, 23.3C/64.4%RH, voltage: 5.42",
"created_at": "2024-05-04T19:46:02.913191Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800775",
"longitude": "-86.08237891",
"temperature": "23.28",
"humidity": "64.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119742/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119742
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T19:44:52.000Z, file: _track.qo, location(gps): 45.4979375,-73.69330078, 24.9C/0%RH, voltage: 5.25",
"created_at": "2024-05-04T19:45:06.591714Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69330078",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119741/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119741
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.784days 2023-07-13T00:48:49Z 24C 75F, 61%RH, now: 2024-05-04T19:37:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T19:38:37.465993Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "23.80",
"humidity": "60.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119740/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119740
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T19:25:21.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.9C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T19:25:40.802339Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119739/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119739
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T18:25:13.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T19:25:40.610822Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119738/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119738
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T19:22:58.000Z, file: _track.qo, where_when: 2024-05-04T18:55:51.000Z, location(gps): 39.8800775,-86.08237891, 23.1C/64.8%RH, voltage: 5.42",
"created_at": "2024-05-04T19:23:16.393250Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800775",
"longitude": "-86.08237891",
"temperature": "23.09",
"humidity": "64.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119737/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119737
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 297.219days 2023-07-12T13:44:32Z 22C 71F, 62%RH, now: 2024-05-04T19:00:09Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T19:01:00.038014Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.53",
"humidity": "62.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119736/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119736
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T18:26:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.4C/49.8%RH, voltage: 5.39",
"created_at": "2024-05-04T18:57:14.098534Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.43",
"humidity": "49.8",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119735/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119735
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T18:55:51.000Z, file: _track.qo, where_when: 2024-05-04T17:55:43.000Z, location(gps): 39.8800775,-86.08237891, 22.9C/65.3%RH, voltage: 5.42",
"created_at": "2024-05-04T18:56:14.098043Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800775",
"longitude": "-86.08237891",
"temperature": "22.89",
"humidity": "65.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119734/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119734
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T18:47:41.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 24.3C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T18:47:58.450653Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "24.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119733/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119733
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T18:44:46.000Z, file: _track.qo, location(gps): 45.4979375,-73.69330078, 27.7C/0%RH, voltage: 5.18",
"created_at": "2024-05-04T18:45:05.786545Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69330078",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119732/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119732
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T18:43:32.000Z, file: _track.qo, location(gps): 45.4980225,-73.69325391, 24.8C/0%RH, voltage: 5.25",
"created_at": "2024-05-04T18:43:46.731863Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980225",
"longitude": "-73.69325391",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119731/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119731
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.742days 2023-07-13T00:48:49Z 23C 74F, 62%RH, now: 2024-05-04T18:37:59Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T18:38:39.195307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "23.41",
"humidity": "61.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119730/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119730
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 297.177days 2023-07-12T13:44:32Z 21C 71F, 62%RH, now: 2024-05-04T18:00:04Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T18:00:55.400188Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.50",
"humidity": "61.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119729/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119729
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T17:41:26.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.2C/50.2%RH, voltage: 5.39",
"created_at": "2024-05-04T17:57:13.022482Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.22",
"humidity": "50.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119727/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119727
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T17:55:43.000Z, file: _track.qo, where_when: 2024-05-04T16:55:31.000Z, location(gps): 39.8800775,-86.08237891, 22.7C/66.8%RH, voltage: 5.41",
"created_at": "2024-05-04T17:56:01.333844Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800775",
"longitude": "-86.08237891",
"temperature": "22.67",
"humidity": "66.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119726/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119726
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T17:47:33.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 24C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T17:47:49.999857Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "24",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119725/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119725
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T17:43:25.000Z, file: _track.qo, location(gps): 45.4980225,-73.69325391, 27.7C/0%RH, voltage: 5.18",
"created_at": "2024-05-04T17:43:45.552524Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980225",
"longitude": "-73.69325391",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119724/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119724
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T17:42:00.000Z, file: _track.qo, location(gps): 45.4980825,-73.69316016, 24.8C/0%RH, voltage: 5.25",
"created_at": "2024-05-04T17:42:14.080050Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980825",
"longitude": "-73.69316016",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119723/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119723
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.701days 2023-07-13T00:48:49Z 23C 74F, 63%RH, now: 2024-05-04T17:37:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T17:38:36.368577Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "23.14",
"humidity": "62.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119722/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119722
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T17:25:05.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.9C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T17:25:34.008176Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119721/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119721
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 297.136days 2023-07-12T13:44:32Z 21C 71F, 61%RH, now: 2024-05-04T16:59:59Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T17:00:49.722397Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.46",
"humidity": "61.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119720/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119720
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T16:56:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.1C/50.4%RH, voltage: 5.39",
"created_at": "2024-05-04T16:57:12.959972Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.07",
"humidity": "50.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119718/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119718
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T16:11:25.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.9C/50.8%RH, voltage: 5.39",
"created_at": "2024-05-04T16:57:12.767158Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.94",
"humidity": "50.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119717/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119717
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T16:55:33.000Z, file: _track.qo, where_when: 2024-05-04T16:55:31.000Z, location(gps): 39.8800775,-86.08237891, 22.5C/68.8%RH, voltage: 5.35",
"created_at": "2024-05-04T16:56:07.158012Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800775",
"longitude": "-86.08237891",
"temperature": "22.48",
"humidity": "68.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119716/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119716
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T16:47:25.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 24.4C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T16:47:43.643792Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119715/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119715
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T16:41:54.000Z, file: _track.qo, location(gps): 45.4980825,-73.69316016, 27.7C/0%RH, voltage: 5.18",
"created_at": "2024-05-04T16:42:14.872625Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980825",
"longitude": "-73.69316016",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119714/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119714
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T16:40:16.000Z, file: _track.qo, location(gps): 45.4980075,-73.69294922, 24.3C/0%RH, voltage: 5.25",
"created_at": "2024-05-04T16:40:30.193826Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69294922",
"temperature": "24.3",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119713/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119713
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.659days 2023-07-13T00:48:49Z 23C 73F, 65%RH, now: 2024-05-04T16:37:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T16:38:37.017800Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "22.77",
"humidity": "65.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119712/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119712
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T16:24:57.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.7C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T16:25:16.321206Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119711/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119711
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T16:09:43.000Z, file: _track.qo, where_when: 2024-05-04T11:39:59.000Z, location(gps): 39.8800725,-86.08233984, 22.1C/69.6%RH, voltage: 5.42",
"created_at": "2024-05-04T16:10:03.430787Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "22.12",
"humidity": "69.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119710/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119710
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 297.094days 2023-07-12T13:44:32Z 21C 71F, 61%RH, now: 2024-05-04T15:59:53Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T16:00:44.851355Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.47",
"humidity": "61.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119709/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119709
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T15:26:26.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21.5C/52%RH, voltage: 5.39",
"created_at": "2024-05-04T15:57:13.945029Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.48",
"humidity": "52.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119708/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119708
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T15:47:18.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 23.5C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T15:47:36.097639Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "23.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119707/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119707
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T15:40:07.000Z, file: _track.qo, location(gps): 45.4980075,-73.69294922, 26.9C/0%RH, voltage: 5.17",
"created_at": "2024-05-04T15:40:27.557682Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69294922",
"temperature": "26.89",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119706/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119706
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T15:38:52.000Z, file: _track.qo, location(gps): 45.4979175,-73.69328516, 24C/0%RH, voltage: 5.25",
"created_at": "2024-05-04T15:39:07.431994Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69328516",
"temperature": "23.97",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119705/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119705
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.617days 2023-07-13T00:48:49Z 22C 72F, 67%RH, now: 2024-05-04T15:37:58Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T15:38:36.357199Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "22.31",
"humidity": "67.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119704/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119704
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T15:24:49.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T15:25:08.330770Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119703/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119703
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T15:23:08.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 23.2C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T15:23:24.986659Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "23.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119702/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119702
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T15:09:35.000Z, file: _track.qo, where_when: 2024-05-04T11:39:59.000Z, location(gps): 39.8800725,-86.08233984, 21.7C/73.4%RH, voltage: 5.42",
"created_at": "2024-05-04T15:09:54.137486Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "21.66",
"humidity": "73.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119701/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119701
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 297.052days 2023-07-12T13:44:32Z 22C 71F, 61%RH, now: 2024-05-04T14:59:48Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T15:00:39.284258Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.67",
"humidity": "61.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119700/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119700
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T14:41:25.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 20.6C/54.1%RH, voltage: 5.38",
"created_at": "2024-05-04T14:57:11.576245Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "20.62",
"humidity": "54.05",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119698/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119698
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T14:46:58.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 24C/0%RH, voltage: 5.2",
"created_at": "2024-05-04T14:47:15.963999Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "24",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119697/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119697
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T14:38:43.000Z, file: _track.qo, location(gps): 45.4979175,-73.69328516, 26.4C/0%RH, voltage: 5.15",
"created_at": "2024-05-04T14:39:03.794663Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69328516",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119696/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119696
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.576days 2023-07-13T00:48:49Z 22C 71F, 68%RH, now: 2024-05-04T14:37:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T14:38:35.361438Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "21.65",
"humidity": "67.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119695/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119695
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T14:36:53.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.5C/53.6%RH, voltage: 5.35",
"created_at": "2024-05-04T14:37:37.643244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.47",
"humidity": "53.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119694/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119694
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T14:36:52.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-05-04T14:37:37.524234Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119693/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119693
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T14:36:50.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.35",
"created_at": "2024-05-04T14:37:37.286117Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119692/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119692
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T14:37:09.000Z, file: _track.qo, location(gps): 45.4980575,-73.69348047, 22.5C/0%RH, voltage: 5.16",
"created_at": "2024-05-04T14:37:22.060611Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980575",
"longitude": "-73.69348047",
"temperature": "22.55",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119691/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119691
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T14:37:07.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980575,-73.69348047, voltage: 5.12",
"created_at": "2024-05-04T14:37:21.871838Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980575",
"longitude": "-73.69348047",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119690/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119690
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T14:37:04.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.6C/0%RH, voltage: 5.14",
"created_at": "2024-05-04T14:37:19.305357Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119689/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119689
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T14:37:02.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980325,-73.69332422, voltage: 5.14",
"created_at": "2024-05-04T14:37:19.078017Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119688/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119688
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T14:24:41.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.4C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T14:25:09.669982Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119687/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119687
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T14:22:55.000Z, file: _track.qo, location(gps): 45.4980575,-73.69348047, 21.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-04T14:23:15.724834Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980575",
"longitude": "-73.69348047",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119686/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119686
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T14:16:29.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-04T14:17:06.434598Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119685/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119685
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T14:09:27.000Z, file: _track.qo, where_when: 2024-05-04T11:39:59.000Z, location(gps): 39.8800725,-86.08233984, 21.3C/72.8%RH, voltage: 5.42",
"created_at": "2024-05-04T14:09:46.522607Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "21.3",
"humidity": "72.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119684/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119684
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 297.011days 2023-07-12T13:44:32Z 22C 72F, 60%RH, now: 2024-05-04T13:59:43Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T14:00:34.034605Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "22.25",
"humidity": "59.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119683/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119683
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T13:56:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.4C/53.4%RH, voltage: 4.26",
"created_at": "2024-05-04T13:57:32.538307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.37",
"humidity": "53.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119682/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119682
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T13:11:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.3C/52.8%RH, voltage: 4.23",
"created_at": "2024-05-04T13:57:32.311128Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.3",
"humidity": "52.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119681/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119681
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.534days 2023-07-13T00:48:49Z 21C 70F, 68%RH, now: 2024-05-04T13:37:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T13:38:37.251472Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992096",
"longitude": "-86.08241272",
"temperature": "21.20",
"humidity": "68.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119680/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119680
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T13:34:35.000Z, file: _track.qo, location(gps): 45.4980375,-73.69320703, 21.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-04T13:34:55.843156Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69320703",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119679/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119679
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T13:24:33.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 29.9C/0%RH, voltage: 5.22",
"created_at": "2024-05-04T13:25:02.138732Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "29.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119678/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119678
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T13:16:29.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-04T13:17:06.095311Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119677/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119677
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T13:09:19.000Z, file: _track.qo, where_when: 2024-05-04T11:39:59.000Z, location(gps): 39.8800725,-86.08233984, 20.6C/75.8%RH, voltage: 5.41",
"created_at": "2024-05-04T13:09:38.130892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "20.62",
"humidity": "75.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119676/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119676
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 296.969days 2023-07-12T13:44:32Z 21C 71F, 63%RH, now: 2024-05-04T12:59:37Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T13:00:28.938687Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.44",
"humidity": "62.90",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119675/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119675
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T12:26:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.3C/52.3%RH, voltage: 4.26",
"created_at": "2024-05-04T12:57:31.291244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.28",
"humidity": "52.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119674/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119674
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T12:46:10.000Z, file: _track.qo, location(gps): 45.4980625,-73.69323047, 22.1C/0%RH, voltage: 4.2",
"created_at": "2024-05-04T12:46:30.778650Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69323047",
"temperature": "22.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119673/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119673
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.492days 2023-07-13T00:48:49Z 20C 69F, 71%RH, now: 2024-05-04T12:37:57Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T12:38:33.354681Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88005066",
"longitude": "-86.08238220",
"temperature": "20.49",
"humidity": "70.51",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119672/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119672
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T12:24:25.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 25.5C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T12:24:44.346908Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "25.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119671/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119671
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T12:16:29.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-04T12:17:05.081925Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119670/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119670
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T12:09:10.000Z, file: _track.qo, where_when: 2024-05-04T11:39:59.000Z, location(gps): 39.8800725,-86.08233984, 20.1C/75.7%RH, voltage: 5.41",
"created_at": "2024-05-04T12:09:28.774735Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "20.09",
"humidity": "75.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119669/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119669
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 296.927days 2023-07-12T13:44:32Z 21C 71F, 63%RH, now: 2024-05-04T11:59:32Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T12:00:23.863941Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.46",
"humidity": "62.90",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119668/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119668
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T11:57:37.000Z, file: _track.qo, location(gps): 45.4980125,-73.69328516, 21.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-04T11:57:58.350309Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69328516",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119666/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119666
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T11:41:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.3C/52.1%RH, voltage: 4.25",
"created_at": "2024-05-04T11:57:30.155372Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.27",
"humidity": "52.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119665/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119665
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T11:39:59.000Z, file: _track.qo, where_when: 2024-05-04T10:39:51.000Z, location(gps): 39.8800725,-86.08233984, 19.8C/76.4%RH, voltage: 5.41",
"created_at": "2024-05-04T11:40:18.054100Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "19.81",
"humidity": "76.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119664/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119664
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.451days 2023-07-13T00:48:49Z 20C 68F, 71%RH, now: 2024-05-04T11:37:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T11:38:36.127954Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88005066",
"longitude": "-86.08238220",
"temperature": "19.89",
"humidity": "70.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119663/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119663
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T11:24:17.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 24.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T11:24:37.544099Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119662/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119662
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T11:16:29.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-04T11:17:06.064338Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119661/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119661
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T11:09:12.000Z, file: _track.qo, location(gps): 45.4977125,-73.69314453, 21.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-04T11:09:32.693153Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977125",
"longitude": "-73.69314453",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119660/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119660
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 296.885days 2023-07-12T13:44:32Z 21C 71F, 63%RH, now: 2024-05-04T10:59:27Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T11:00:18.645242Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.49",
"humidity": "62.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119659/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119659
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T10:56:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.3C/51.6%RH, voltage: 4.25",
"created_at": "2024-05-04T10:57:30.202778Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.3",
"humidity": "51.58",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119658/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119658
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T10:11:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.4C/51.3%RH, voltage: 4.23",
"created_at": "2024-05-04T10:57:30.016104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.41",
"humidity": "51.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119657/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119657
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T10:39:51.000Z, file: _track.qo, where_when: 2024-05-04T09:39:43.000Z, location(gps): 39.8800725,-86.08233984, 19.7C/74.8%RH, voltage: 5.41",
"created_at": "2024-05-04T10:40:10.405955Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "19.7",
"humidity": "74.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119656/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119656
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.409days 2023-07-13T00:48:49Z 19C 67F, 72%RH, now: 2024-05-04T10:37:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T10:38:33.980933Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88005066",
"longitude": "-86.08238220",
"temperature": "19.48",
"humidity": "72.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119655/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119655
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T10:24:09.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T10:24:35.260448Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119654/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119654
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-04T09:24:01.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.5C/0%RH, voltage: 5.23",
"created_at": "2024-05-04T10:24:35.062157Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119653/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119653
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T10:20:11.000Z, file: _track.qo, location(gps): 45.4979925,-73.69330078, 21.9C/0%RH, voltage: 4.2",
"created_at": "2024-05-04T10:20:32.832986Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69330078",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119652/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119652
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T10:16:29.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-04T10:17:05.778127Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119651/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119651
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 296.844days 2023-07-12T13:44:32Z 22C 71F, 62%RH, now: 2024-05-04T09:59:21Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T10:00:13.312595Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.51",
"humidity": "62.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119650/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119650
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T09:26:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.5C/51.3%RH, voltage: 4.25",
"created_at": "2024-05-04T09:57:29.512021Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.5",
"humidity": "51.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119648/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119648
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-04T09:39:43.000Z, file: _track.qo, where_when: 2024-05-04T08:39:35.000Z, location(gps): 39.8800725,-86.08233984, 19.2C/77.4%RH, voltage: 5.41",
"created_at": "2024-05-04T09:40:03.535170Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800725",
"longitude": "-86.08233984",
"temperature": "19.25",
"humidity": "77.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119647/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119647
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 296.367days 2023-07-13T00:48:49Z 19C 67F, 73%RH, now: 2024-05-04T09:37:56Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-04T09:38:34.891044Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88005066",
"longitude": "-86.08238220",
"temperature": "19.19",
"humidity": "73.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119646/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119646
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-04T09:31:42.000Z, file: _track.qo, location(gps): 45.4980225,-73.69327734, 22.2C/0%RH, voltage: 4.21",
"created_at": "2024-05-04T09:32:03.282924Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980225",
"longitude": "-73.69327734",
"temperature": "22.22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119645/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119645
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-04T09:16:29.000Z, file: _track.qo, location(gps): 45.4980325,-73.69332422, 21.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-04T09:17:05.573125Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69332422",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119644/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119644
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 296.802days 2023-07-12T13:44:32Z 22C 71F, 62%RH, now: 2024-05-04T08:59:16Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-04T09:00:08.198903Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.57",
"humidity": "62.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119643/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119643
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-04T08:41:19.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.6C/51.2%RH, voltage: 4.26",
"created_at": "2024-05-04T08:57:28.432146Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.6",
"humidity": "51.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119641/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119641
}
]
}