HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 160347,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-id&page=1071",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-id&page=1069",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T07:12:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/50.7%RH, voltage: 4.26",
"created_at": "2024-05-19T07:57:22.665367Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.99",
"humidity": "50.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122841/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122841
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T07:44:51.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 21.8C/62.1%RH, voltage: 5.42",
"created_at": "2024-05-19T07:45:01.868644Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "21.78",
"humidity": "62.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122840/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122840
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.286days 2023-07-13T00:48:49Z 22C 72F, 60%RH, now: 2024-05-19T07:40:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T07:41:04.231355Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.23",
"humidity": "59.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122839/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122839
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T07:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 20.3C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T07:34:04.372143Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122838/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122838
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.740days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-19T07:30:23Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T07:31:05.367611Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87979507",
"longitude": "-86.08274078",
"temperature": "20.94",
"humidity": "63.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122837/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122837
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T07:22:33.000Z, file: _track.qo, location(gps): 45.4980325,-73.69325391, 24.2C/0%RH, voltage: 4.2",
"created_at": "2024-05-19T07:22:55.664289Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69325391",
"temperature": "24.17",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122836/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122836
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T07:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 24.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-19T07:03:06.267931Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "24.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122835/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122835
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T06:27:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.1C/50.4%RH, voltage: 4.27",
"created_at": "2024-05-19T06:57:21.492907Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.08",
"humidity": "50.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122834/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122834
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T06:44:43.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 21.9C/61.5%RH, voltage: 5.41",
"created_at": "2024-05-19T06:44:55.080847Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "21.92",
"humidity": "61.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122833/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122833
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.244days 2023-07-13T00:48:49Z 22C 72F, 59%RH, now: 2024-05-19T06:40:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T06:41:02.411844Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.37",
"humidity": "59.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122832/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122832
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T06:34:12.000Z, file: _track.qo, location(gps): 45.4980375,-73.69326953, 24.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T06:34:35.302836Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69326953",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122831/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122831
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T06:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 20.3C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T06:34:04.403425Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122830/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122830
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.698days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-19T06:30:18Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T06:31:00.097589Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87965775",
"longitude": "-86.08204651",
"temperature": "20.89",
"humidity": "63.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122829/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122829
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T06:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 24.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-19T06:03:06.222027Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122828/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122828
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T05:42:56.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.2C/50%RH, voltage: 4.26",
"created_at": "2024-05-19T05:57:21.768857Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.15",
"humidity": "50.05",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122827/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122827
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T04:57:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.2C/49.8%RH, voltage: 4.26",
"created_at": "2024-05-19T05:57:21.558343Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.22",
"humidity": "49.8",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122826/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122826
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T05:45:38.000Z, file: _track.qo, location(gps): 45.4979225,-73.69333203, 24.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T05:46:00.734195Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979225",
"longitude": "-73.69333203",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122825/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122825
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T05:44:35.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 22C/61.1%RH, voltage: 5.42",
"created_at": "2024-05-19T05:44:45.681066Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.05",
"humidity": "61.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122824/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122824
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.202days 2023-07-13T00:48:49Z 23C 73F, 59%RH, now: 2024-05-19T05:40:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T05:41:02.035111Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.51",
"humidity": "58.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122823/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122823
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T05:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 20.3C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T05:34:04.407450Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122822/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122822
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.657days 2023-07-12T13:44:32Z 21C 69F, 63%RH, now: 2024-05-19T05:30:13Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T05:30:54.974411Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08241272",
"temperature": "20.81",
"humidity": "63.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122821/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122821
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T05:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 24.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-19T05:03:06.257404Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122820/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122820
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T04:12:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.3C/49.3%RH, voltage: 4.27",
"created_at": "2024-05-19T04:57:20.985064Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.32",
"humidity": "49.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122819/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122819
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T04:56:46.000Z, file: _track.qo, location(gps): 45.4978525,-73.69262109, 24.8C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T04:57:08.635788Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978525",
"longitude": "-73.69262109",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122818/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122818
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T04:44:27.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 22.1C/60.5%RH, voltage: 5.41",
"created_at": "2024-05-19T04:44:38.255910Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.14",
"humidity": "60.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122817/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122817
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.161days 2023-07-13T00:48:49Z 23C 73F, 59%RH, now: 2024-05-19T04:40:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T04:41:03.195534Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.62",
"humidity": "58.74",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122816/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122816
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T04:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 20.1C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T04:34:04.798833Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "20.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122815/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122815
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.615days 2023-07-12T13:44:32Z 21C 69F, 63%RH, now: 2024-05-19T04:30:07Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T04:30:49.695185Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08241272",
"temperature": "20.64",
"humidity": "63.11",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122814/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122814
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T04:08:16.000Z, file: _track.qo, location(gps): 45.4980725,-73.69333203, 24.8C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T04:08:39.089911Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69333203",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122813/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122813
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T04:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 24.4C/0%RH, voltage: 4.25",
"created_at": "2024-05-19T04:03:07.785492Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "24.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122812/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122812
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T03:27:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.4C/48.6%RH, voltage: 4.27",
"created_at": "2024-05-19T03:57:22.445307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.37",
"humidity": "48.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122811/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122811
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T03:44:19.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 22.3C/59.5%RH, voltage: 5.41",
"created_at": "2024-05-19T03:44:30.475096Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.3",
"humidity": "59.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122810/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122810
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.119days 2023-07-13T00:48:49Z 23C 73F, 57%RH, now: 2024-05-19T03:40:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T03:41:04.492234Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.81",
"humidity": "57.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122809/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122809
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T03:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 20.3C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T03:34:04.338636Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "20.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122808/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122808
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.573days 2023-07-12T13:44:32Z 20C 69F, 63%RH, now: 2024-05-19T03:30:02Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T03:30:44.659336Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08241272",
"temperature": "20.36",
"humidity": "63.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122807/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122807
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T03:19:48.000Z, file: _track.qo, location(gps): 45.4980675,-73.69319922, 24.8C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T03:20:11.419706Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69319922",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122806/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122806
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T03:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 24.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-19T03:03:06.816869Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "24.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122805/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122805
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T02:42:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/47.6%RH, voltage: 4.25",
"created_at": "2024-05-19T02:57:21.059916Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.51",
"humidity": "47.58",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122804/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122804
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T02:44:11.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 22.4C/59.2%RH, voltage: 5.41",
"created_at": "2024-05-19T02:44:22.437958Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.41",
"humidity": "59.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122803/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122803
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.077days 2023-07-13T00:48:49Z 23C 73F, 57%RH, now: 2024-05-19T02:40:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T02:41:01.456012Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.88",
"humidity": "57.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122802/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122802
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T01:57:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/46.5%RH, voltage: 4.27",
"created_at": "2024-05-19T02:34:18.365149Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.85",
"humidity": "46.52",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122801/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122801
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T02:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 19.8C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T02:34:08.891654Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "19.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122800/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122800
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T02:31:33.000Z, file: _track.qo, location(gps): 45.4979875,-73.69320703, 25.1C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T02:31:59.435322Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979875",
"longitude": "-73.69320703",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122799/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122799
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.532days 2023-07-12T13:44:32Z 21C 70F, 61%RH, now: 2024-05-19T02:29:57Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T02:30:40.687061Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08241272",
"temperature": "20.86",
"humidity": "60.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122798/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122798
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T02:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-19T02:03:07.005194Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "25.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122797/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122797
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T01:44:03.000Z, file: _track.qo, where_when: 2024-05-19T00:47:19.000Z, location(gps): 39.8799225,-86.08233984, 22.5C/57.5%RH, voltage: 5.42",
"created_at": "2024-05-19T01:44:15.173771Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.52",
"humidity": "57.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122796/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122796
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T01:42:46.000Z, file: _track.qo, location(gps): 45.4982475,-73.69338672, 27.7C/0%RH, voltage: 4.16",
"created_at": "2024-05-19T01:43:10.489985Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982475",
"longitude": "-73.69338672",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122795/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122795
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T01:41:08.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24C/46.2%RH, voltage: 4.26",
"created_at": "2024-05-19T01:41:58.875477Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.95",
"humidity": "46.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122794/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122794
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T01:12:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/46%RH, voltage: 5.39",
"created_at": "2024-05-19T01:41:58.443775Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.78",
"humidity": "45.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122793/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122793
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T01:41:07.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4947625,-73.69164062, voltage: 4.26",
"created_at": "2024-05-19T01:41:58.341414Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122792/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122792
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T01:41:05.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4947625,-73.69164062, voltage: 4.26",
"created_at": "2024-05-19T01:41:58.143382Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122791/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122791
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T01:41:10.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 26.1C/0%RH, voltage: 4.2",
"created_at": "2024-05-19T01:41:45.457287Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "26.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122790/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122790
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T01:41:08.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4980125,-73.69332422, voltage: 4.19",
"created_at": "2024-05-19T01:41:44.991861Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122789/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122789
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T01:41:12.000Z, file: _track.qo, location(gps): 45.4981325,-73.69324609, 26.4C/0%RH, voltage: 4.21",
"created_at": "2024-05-19T01:41:28.161884Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981325",
"longitude": "-73.69324609",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122788/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122788
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T01:41:10.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4981325,-73.69324609, voltage: 4.21",
"created_at": "2024-05-19T01:41:27.953427Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981325",
"longitude": "-73.69324609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122787/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122787
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 311.036days 2023-07-13T00:48:49Z 23C 73F, 56%RH, now: 2024-05-19T01:40:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T01:41:03.755171Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.94",
"humidity": "56.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122786/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122786
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T01:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 19.9C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T01:34:04.496731Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "19.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122785/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122785
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.490days 2023-07-12T13:44:32Z 20C 67F, 63%RH, now: 2024-05-19T01:29:51Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T01:30:34.198836Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08241272",
"temperature": "19.64",
"humidity": "63.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122784/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122784
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T01:05:03.000Z, file: _track.qo, location(gps): 45.4981325,-73.69324609, 29.5C/0%RH, voltage: 5.18",
"created_at": "2024-05-19T01:05:25.637073Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981325",
"longitude": "-73.69324609",
"temperature": "29.48",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122783/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122783
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T01:03:31.000Z, file: _track.qo, location(gps): 45.4981525,-73.69315234, 26.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-19T01:03:50.465910Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981525",
"longitude": "-73.69315234",
"temperature": "26.23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122782/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122782
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T01:02:29.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 25.7C/0%RH, voltage: 5.2",
"created_at": "2024-05-19T01:02:49.870305Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "25.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122781/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122781
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-19T00:27:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 23.6C/45.2%RH, voltage: 5.39",
"created_at": "2024-05-19T00:57:16.662781Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "23.62",
"humidity": "45.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122780/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122780
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-19T00:47:19.000Z, file: _track.qo, where_when: 2024-05-18T23:47:11.000Z, location(gps): 39.8799225,-86.08233984, 22.5C/55.8%RH, voltage: 5.41",
"created_at": "2024-05-19T00:47:30.377277Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.45",
"humidity": "55.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122779/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122779
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 310.994days 2023-07-13T00:48:49Z 23C 73F, 54%RH, now: 2024-05-19T00:40:19Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-19T00:41:00.140449Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.97",
"humidity": "54.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122778/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122778
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-19T00:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 19.6C/0%RH, voltage: 4.18",
"created_at": "2024-05-19T00:34:03.543893Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "19.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122777/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122777
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.448days 2023-07-12T13:44:32Z 20C 67F, 60%RH, now: 2024-05-19T00:29:46Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-19T00:30:29.102660Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87977219",
"longitude": "-86.08252716",
"temperature": "19.55",
"humidity": "59.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122776/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122776
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T00:03:22.000Z, file: _track.qo, location(gps): 45.4981525,-73.69315234, 28.5C/0%RH, voltage: 5.18",
"created_at": "2024-05-19T00:03:46.751995Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981525",
"longitude": "-73.69315234",
"temperature": "28.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122775/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122775
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-19T00:02:21.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 26C/0%RH, voltage: 5.2",
"created_at": "2024-05-19T00:02:38.793295Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "26",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122774/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122774
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-19T00:02:15.000Z, file: _track.qo, location(gps): 45.4981375,-73.69328516, 25.9C/0%RH, voltage: 5.25",
"created_at": "2024-05-19T00:02:32.965038Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69328516",
"temperature": "25.92",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122773/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122773
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-18T23:42:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.7C/44.9%RH, voltage: 5.39",
"created_at": "2024-05-18T23:57:18.010944Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.74",
"humidity": "44.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122772/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122772
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-18T22:57:55.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.7C/44.8%RH, voltage: 5.39",
"created_at": "2024-05-18T23:57:17.669089Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.71",
"humidity": "44.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122771/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122771
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-18T23:47:11.000Z, file: _track.qo, where_when: 2024-05-18T22:47:03.000Z, location(gps): 39.8799225,-86.08233984, 22.6C/55.7%RH, voltage: 5.42",
"created_at": "2024-05-18T23:47:22.807403Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.61",
"humidity": "55.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122770/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122770
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 310.952days 2023-07-13T00:48:49Z 23C 74F, 54%RH, now: 2024-05-18T23:40:19Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-18T23:40:59.543795Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "23.18",
"humidity": "53.60",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122769/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122769
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-18T23:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 19.9C/0%RH, voltage: 4.18",
"created_at": "2024-05-18T23:34:04.681282Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "19.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122768/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122768
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.406days 2023-07-12T13:44:32Z 20C 68F, 58%RH, now: 2024-05-18T23:29:41Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-18T23:30:23.836107Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87977219",
"longitude": "-86.08252716",
"temperature": "19.75",
"humidity": "58.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122767/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122767
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-18T23:02:13.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 25.9C/0%RH, voltage: 5.2",
"created_at": "2024-05-18T23:02:31.641777Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "25.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122766/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122766
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-18T23:02:09.000Z, file: _track.qo, location(gps): 45.4981375,-73.69328516, 29.4C/0%RH, voltage: 5.18",
"created_at": "2024-05-18T23:02:31.548089Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981375",
"longitude": "-73.69328516",
"temperature": "29.36",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122765/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122765
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-18T23:00:35.000Z, file: _track.qo, location(gps): 45.4980325,-73.69333203, 26.1C/0%RH, voltage: 5.26",
"created_at": "2024-05-18T23:00:51.487771Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69333203",
"temperature": "26.11",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122764/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122764
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-18T22:12:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/44.4%RH, voltage: 5.39",
"created_at": "2024-05-18T22:57:16.199256Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.91",
"humidity": "44.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122763/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122763
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-18T22:47:03.000Z, file: _track.qo, where_when: 2024-05-18T21:46:55.000Z, location(gps): 39.8799225,-86.08233984, 22.7C/56.6%RH, voltage: 5.42",
"created_at": "2024-05-18T22:47:14.854498Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.69",
"humidity": "56.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122762/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122762
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 310.911days 2023-07-13T00:48:49Z 23C 74F, 56%RH, now: 2024-05-18T22:40:19Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-18T22:40:58.876253Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "23.32",
"humidity": "55.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122761/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122761
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-18T22:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 19.9C/0%RH, voltage: 4.18",
"created_at": "2024-05-18T22:34:09.648971Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "19.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122760/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122760
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.365days 2023-07-12T13:44:32Z 20C 68F, 63%RH, now: 2024-05-18T22:29:35Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-18T22:30:18.714948Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87986374",
"longitude": "-86.08297729",
"temperature": "19.98",
"humidity": "62.76",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122759/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122759
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-18T22:02:05.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 26.2C/0%RH, voltage: 5.2",
"created_at": "2024-05-18T22:02:22.812338Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122758/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122758
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-18T22:00:26.000Z, file: _track.qo, location(gps): 45.4980325,-73.69333203, 29.4C/0%RH, voltage: 5.18",
"created_at": "2024-05-18T22:00:48.255552Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980325",
"longitude": "-73.69333203",
"temperature": "29.36",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122757/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122757
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-18T21:59:11.000Z, file: _track.qo, location(gps): 45.4979925,-73.69329297, 26.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-18T21:59:28.450357Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69329297",
"temperature": "26.23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122756/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122756
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-18T21:27:54.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/44%RH, voltage: 5.39",
"created_at": "2024-05-18T21:57:15.641546Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.17",
"humidity": "43.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122755/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122755
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-18T21:46:55.000Z, file: _track.qo, where_when: 2024-05-18T20:46:47.000Z, location(gps): 39.8799225,-86.08233984, 22.7C/59.8%RH, voltage: 5.42",
"created_at": "2024-05-18T21:47:07.540203Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.66",
"humidity": "59.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122754/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122754
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 310.869days 2023-07-13T00:48:49Z 23C 74F, 57%RH, now: 2024-05-18T21:40:18Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-18T21:40:58.844892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "23.20",
"humidity": "57.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122753/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122753
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-18T21:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 20.2C/0%RH, voltage: 4.18",
"created_at": "2024-05-18T21:34:05.083429Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "20.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122752/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122752
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.323days 2023-07-12T13:44:32Z 20C 68F, 62%RH, now: 2024-05-18T21:29:30Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-18T21:30:13.519547Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87986374",
"longitude": "-86.08297729",
"temperature": "20.13",
"humidity": "62.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122751/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122751
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-18T21:01:58.000Z, file: _track.qo, location(gps): 45.4980125,-73.69332422, 26.2C/0%RH, voltage: 5.2",
"created_at": "2024-05-18T21:02:26.691208Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69332422",
"temperature": "26.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122750/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122750
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-18T20:59:05.000Z, file: _track.qo, location(gps): 45.4979925,-73.69329297, 29.8C/0%RH, voltage: 5.18",
"created_at": "2024-05-18T20:59:26.858911Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69329297",
"temperature": "29.8",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122749/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122749
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-18T20:57:31.000Z, file: _track.qo, location(gps): 45.4980675,-73.69339453, 26.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-18T20:57:49.439891Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69339453",
"temperature": "26.23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122748/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122748
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-18T20:42:55.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.2C/43.9%RH, voltage: 5.39",
"created_at": "2024-05-18T20:57:14.896786Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.16",
"humidity": "43.9",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122747/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122747
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-18T19:57:54.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.2C/43.8%RH, voltage: 5.39",
"created_at": "2024-05-18T20:57:14.707604Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.24",
"humidity": "43.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122746/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122746
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-18T20:46:47.000Z, file: _track.qo, where_when: 2024-05-18T19:46:39.000Z, location(gps): 39.8799225,-86.08233984, 22.5C/60.6%RH, voltage: 5.42",
"created_at": "2024-05-18T20:47:00.205424Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799225",
"longitude": "-86.08233984",
"temperature": "22.45",
"humidity": "60.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122745/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122745
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 310.827days 2023-07-13T00:48:49Z 23C 73F, 59%RH, now: 2024-05-18T20:40:18Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-18T20:40:57.522890Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88007736",
"longitude": "-86.08247375",
"temperature": "22.97",
"humidity": "59.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122744/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122744
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-18T20:33:34.000Z, file: _track.qo, location(gps): 50.6310375,3.08525391, 19.9C/0%RH, voltage: 4.18",
"created_at": "2024-05-18T20:34:04.950000Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6310375",
"longitude": "3.08525391",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122743/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122743
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 311.281days 2023-07-12T13:44:32Z 21C 69F, 63%RH, now: 2024-05-18T20:29:25Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-18T20:30:08.413271Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88002014",
"longitude": "-86.08267212",
"temperature": "20.82",
"humidity": "63.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122742/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122742
}
]
}