HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 159269,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=958",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=956",
"results": [
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.375days 2023-07-13T00:48:49Z 24C 75F, 64%RH, now: 2024-07-11T09:49:22Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T09:49:57.083271Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "23.96",
"humidity": "64.40",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133064/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133064
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T09:44:14.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 23.8C/65%RH, voltage: 5.42",
"created_at": "2024-07-11T09:44:35.787536Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "23.75",
"humidity": "65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133063/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133063
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T09:33:35.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 24.9C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T09:33:58.909333Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133062/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133062
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T09:22:22.000Z, file: _track.qo, location(gps): 45.4979175,-73.69351953, 25.3C/0%RH, voltage: 3.79",
"created_at": "2024-07-11T09:22:53.234540Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69351953",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133061/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133061
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.816days 2023-07-12T13:44:32Z 29C 84F, 43%RH, now: 2024-07-11T09:20:13Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T09:21:07.798687Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "28.64",
"humidity": "43.40",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133060/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133060
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T09:20:34.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 22.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-11T09:20:50.614840Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "22.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133059/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133059
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T08:37:35.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.8C/56.6%RH, voltage: 4.05",
"created_at": "2024-07-11T08:57:38.165960Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.78",
"humidity": "56.6",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133058/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133058
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.334days 2023-07-13T00:48:49Z 24C 75F, 64%RH, now: 2024-07-11T08:49:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T08:49:58.108197Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "24.08",
"humidity": "64.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133057/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133057
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T08:44:06.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 23.9C/64.8%RH, voltage: 5.42",
"created_at": "2024-07-11T08:44:25.961797Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "23.92",
"humidity": "64.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133056/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133056
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T08:33:35.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 24.9C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T08:33:59.233313Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133055/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133055
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T08:33:00.000Z, file: _track.qo, location(gps): 45.4979975,-73.69326172, 25.3C/0%RH, voltage: 3.79",
"created_at": "2024-07-11T08:33:31.943637Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69326172",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133054/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133054
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.775days 2023-07-12T13:44:32Z 29C 83F, 43%RH, now: 2024-07-11T08:20:08Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T08:20:59.597151Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "28.51",
"humidity": "43.32",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133053/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133053
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T08:20:26.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 23.4C/0%RH, voltage: 5.22",
"created_at": "2024-07-11T08:20:41.021035Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "23.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133052/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133052
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T07:52:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.8C/56.5%RH, voltage: 4.05",
"created_at": "2024-07-11T07:57:37.154573Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.81",
"humidity": "56.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133051/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133051
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T07:07:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 23.9C/56.4%RH, voltage: 4.04",
"created_at": "2024-07-11T07:57:36.958110Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "23.86",
"humidity": "56.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133050/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133050
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.292days 2023-07-13T00:48:49Z 24C 75F, 66%RH, now: 2024-07-11T07:49:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T07:49:56.420917Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "23.78",
"humidity": "66.33",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133049/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133049
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T07:44:29.000Z, file: _track.qo, location(gps): 45.4979225,-73.69313672, 25.3C/0%RH, voltage: 3.79",
"created_at": "2024-07-11T07:44:58.027715Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979225",
"longitude": "-73.69313672",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133048/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133048
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T07:43:58.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 23.8C/68.1%RH, voltage: 5.42",
"created_at": "2024-07-11T07:44:18.075923Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "23.81",
"humidity": "68.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133047/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133047
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:40:30.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 22.4C/0%RH, voltage: 5.16",
"created_at": "2024-07-11T07:40:43.679540Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "22.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133046/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133046
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:40:28.000Z, why: USB power ON {usb-enabled}, location(gps): 50.6286675,3.08577734, voltage: 5.1",
"created_at": "2024-07-11T07:40:43.392692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133045/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133045
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T07:33:31.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 24.9C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T07:33:54.066108Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133044/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133044
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:29:18.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 26C/0%RH, voltage: 4.19",
"created_at": "2024-07-11T07:29:59.827702Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "26",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133043/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133043
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:29:16.000Z, why: USB power OFF {usb-disabled}, location(gps): 50.6286675,3.08577734, voltage: 4.2",
"created_at": "2024-07-11T07:29:59.463421Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133042/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133042
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.733days 2023-07-12T13:44:32Z 28C 83F, 44%RH, now: 2024-07-11T07:20:03Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T07:20:55.281151Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "28.16",
"humidity": "43.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133041/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133041
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:20:20.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 29.3C/0%RH, voltage: 5.12",
"created_at": "2024-07-11T07:20:44.136785Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "29.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133040/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133040
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:15:21.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 21.6C/0%RH, voltage: 5.07",
"created_at": "2024-07-11T07:16:58.883880Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "21.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133039/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133039
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T07:15:19.000Z, why: USB power ON {usb-enabled}, location(gps): 50.6312575,3.08505859, voltage: 5.02",
"created_at": "2024-07-11T07:16:58.622390Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133038/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133038
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T06:22:39.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/56.4%RH, voltage: 4.05",
"created_at": "2024-07-11T06:57:37.230063Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.85",
"humidity": "56.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133037/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133037
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T06:56:01.000Z, file: _track.qo, location(gps): 45.4980675,-73.69333203, 25.3C/0%RH, voltage: 3.79",
"created_at": "2024-07-11T06:56:30.324501Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69333203",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133036/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133036
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.250days 2023-07-13T00:48:49Z 24C 75F, 69%RH, now: 2024-07-11T06:49:21Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T06:49:56.358798Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "23.61",
"humidity": "69.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133035/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133035
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T06:43:50.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 23.7C/69.6%RH, voltage: 5.42",
"created_at": "2024-07-11T06:44:09.815098Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "23.72",
"humidity": "69.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133034/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133034
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T06:33:31.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 24.8C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T06:33:53.347564Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133033/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133033
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T06:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 21.4C/0%RH, voltage: 4.22",
"created_at": "2024-07-11T06:31:52.371888Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "21.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133032/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133032
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.691days 2023-07-12T13:44:32Z 28C 82F, 47%RH, now: 2024-07-11T06:19:57Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T06:20:50.004710Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "27.60",
"humidity": "46.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133031/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133031
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T06:07:31.000Z, file: _track.qo, location(gps): 45.4980675,-73.69327734, 25.3C/0%RH, voltage: 3.79",
"created_at": "2024-07-11T06:07:59.203925Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980675",
"longitude": "-73.69327734",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133030/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133030
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T05:37:39.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/56.2%RH, voltage: 4.05",
"created_at": "2024-07-11T05:57:36.484718Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.85",
"humidity": "56.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133029/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133029
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.209days 2023-07-13T00:48:49Z 24C 75F, 68%RH, now: 2024-07-11T05:49:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T05:49:55.527051Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "24.15",
"humidity": "68.48",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133028/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133028
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T05:43:42.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 24.1C/68.7%RH, voltage: 5.41",
"created_at": "2024-07-11T05:44:03.509144Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "24.11",
"humidity": "68.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133027/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133027
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T05:33:31.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 25.1C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T05:33:54.473419Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "25.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133026/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133026
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T05:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 21.7C/0%RH, voltage: 4.23",
"created_at": "2024-07-11T05:31:51.503961Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "21.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133025/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133025
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.650days 2023-07-12T13:44:32Z 27C 81F, 48%RH, now: 2024-07-11T05:19:52Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T05:20:45.708097Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "27.23",
"humidity": "47.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133024/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133024
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T05:18:48.000Z, file: _track.qo, location(gps): 45.4979575,-73.69327734, 25.3C/0%RH, voltage: 3.79",
"created_at": "2024-07-11T05:19:19.874803Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979575",
"longitude": "-73.69327734",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133023/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133023
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T04:52:43.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/55.9%RH, voltage: 4.05",
"created_at": "2024-07-11T04:57:35.482332Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.92",
"humidity": "55.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133022/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133022
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T04:07:43.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/55.7%RH, voltage: 4.04",
"created_at": "2024-07-11T04:57:35.293813Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.95",
"humidity": "55.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133021/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133021
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.167days 2023-07-13T00:48:49Z 25C 76F, 66%RH, now: 2024-07-11T04:49:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T04:49:54.264128Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "24.70",
"humidity": "66.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133020/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133020
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T04:43:34.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 24.5C/67.9%RH, voltage: 5.42",
"created_at": "2024-07-11T04:43:54.491274Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "24.53",
"humidity": "67.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133019/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133019
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T04:33:31.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 25.4C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T04:33:53.758577Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "25.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133018/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133018
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T04:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.1C/0%RH, voltage: 4.23",
"created_at": "2024-07-11T04:31:52.326114Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133017/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133017
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T04:30:18.000Z, file: _track.qo, location(gps): 45.4977125,-73.69324609, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-11T04:30:50.057450Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977125",
"longitude": "-73.69324609",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133016/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133016
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.608days 2023-07-12T13:44:32Z 27C 81F, 48%RH, now: 2024-07-11T04:19:47Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T04:20:39.374725Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "27.09",
"humidity": "47.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133015/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133015
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T03:22:43.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/55.4%RH, voltage: 4.05",
"created_at": "2024-07-11T03:57:35.010790Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.94",
"humidity": "55.4",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133014/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133014
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.125days 2023-07-13T00:48:49Z 25C 76F, 66%RH, now: 2024-07-11T03:49:20Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T03:49:55.673935Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "24.64",
"humidity": "66.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133013/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133013
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T03:43:26.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 24.6C/67.2%RH, voltage: 5.42",
"created_at": "2024-07-11T03:43:47.363683Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "24.61",
"humidity": "67.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133012/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133012
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T03:41:56.000Z, file: _track.qo, location(gps): 45.4982675,-73.69313672, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-11T03:42:23.632583Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982675",
"longitude": "-73.69313672",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133011/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133011
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T03:33:31.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 25.3C/0%RH, voltage: 4.04",
"created_at": "2024-07-11T03:33:54.286933Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "25.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133010/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133010
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T03:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.2C/0%RH, voltage: 4.23",
"created_at": "2024-07-11T03:31:54.452951Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133009/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133009
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.566days 2023-07-12T13:44:32Z 27C 81F, 45%RH, now: 2024-07-11T03:19:41Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T03:20:33.129089Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "27.00",
"humidity": "45.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133008/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133008
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T02:37:43.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.9C/55%RH, voltage: 4.05",
"created_at": "2024-07-11T02:57:34.901465Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.93",
"humidity": "54.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133007/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133007
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T02:53:17.000Z, file: _track.qo, location(gps): 45.4977125,-73.69327734, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-11T02:53:46.657111Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977125",
"longitude": "-73.69327734",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133006/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133006
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.084days 2023-07-13T00:48:49Z 24C 75F, 71%RH, now: 2024-07-11T02:49:19Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T02:49:55.742362Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "24.05",
"humidity": "70.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133005/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133005
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T02:43:18.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 24.8C/68.9%RH, voltage: 5.42",
"created_at": "2024-07-11T02:43:38.729577Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "24.84",
"humidity": "68.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133004/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133004
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T02:33:31.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 24.9C/0%RH, voltage: 4.04",
"created_at": "2024-07-11T02:34:07.473541Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133003/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133003
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T02:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.1C/0%RH, voltage: 4.23",
"created_at": "2024-07-11T02:31:52.011320Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133002/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133002
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.524days 2023-07-12T13:44:32Z 27C 81F, 50%RH, now: 2024-07-11T02:19:36Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T02:20:28.741252Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "26.98",
"humidity": "49.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133001/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133001
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T02:04:44.000Z, file: _track.qo, location(gps): 45.4980725,-73.69335547, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-11T02:05:12.557665Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69335547",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/133000/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 133000
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T01:52:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24C/54.4%RH, voltage: 4.05",
"created_at": "2024-07-11T01:57:33.728435Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.96",
"humidity": "54.43",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132999/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132999
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T01:07:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24C/53.6%RH, voltage: 4.04",
"created_at": "2024-07-11T01:57:33.515471Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.01",
"humidity": "53.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132998/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132998
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.042days 2023-07-13T00:48:49Z 25C 77F, 67%RH, now: 2024-07-11T01:49:19Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T01:49:55.327418Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "25.17",
"humidity": "67.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132997/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132997
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T01:43:10.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 25.2C/66.3%RH, voltage: 5.41",
"created_at": "2024-07-11T01:43:31.142995Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "25.2",
"humidity": "66.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132996/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132996
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T01:33:27.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 25.4C/0%RH, voltage: 4.04",
"created_at": "2024-07-11T01:33:50.095517Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "25.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132995/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132995
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T01:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.2C/0%RH, voltage: 4.23",
"created_at": "2024-07-11T01:31:55.924689Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132994/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132994
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.483days 2023-07-12T13:44:32Z 27C 80F, 50%RH, now: 2024-07-11T01:19:31Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T01:20:24.055764Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "26.86",
"humidity": "50.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132993/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132993
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T01:16:05.000Z, file: _track.qo, location(gps): 45.4987575,-73.69351172, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-11T01:16:35.114617Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4987575",
"longitude": "-73.69351172",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132992/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132992
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-11T00:22:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/53%RH, voltage: 4.05",
"created_at": "2024-07-11T00:57:33.138028Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.94",
"humidity": "53.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132991/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132991
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 364.000days 2023-07-13T00:48:49Z 26C 79F, 61%RH, now: 2024-07-11T00:49:18Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-11T00:49:54.261313Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87992477",
"longitude": "-86.08250427",
"temperature": "25.98",
"humidity": "61.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132990/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132990
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T00:43:00.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 25.5C/62.5%RH, voltage: 5.43",
"created_at": "2024-07-11T00:43:26.226073Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "25.48",
"humidity": "62.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132989/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132989
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-11T00:33:27.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 25.3C/0%RH, voltage: 4.03",
"created_at": "2024-07-11T00:33:50.800893Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "25.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132988/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132988
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-11T00:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.2C/0%RH, voltage: 4.23",
"created_at": "2024-07-11T00:31:52.110670Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132987/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132987
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-11T00:27:29.000Z, file: _track.qo, location(gps): 45.4980225,-73.69334766, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-11T00:28:01.151683Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980225",
"longitude": "-73.69334766",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132986/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132986
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.441days 2023-07-12T13:44:32Z 27C 80F, 51%RH, now: 2024-07-11T00:19:25Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-11T00:20:17.950386Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "26.70",
"humidity": "51.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132985/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132985
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-11T00:02:46.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 25.5C/62%RH, voltage: 5.42",
"created_at": "2024-07-11T00:03:07.793693Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "25.52",
"humidity": "61.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132984/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132984
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-10T23:37:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/52.4%RH, voltage: 4.05",
"created_at": "2024-07-10T23:57:33.432722Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.87",
"humidity": "52.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132983/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132983
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 363.959days 2023-07-13T00:48:49Z 26C 79F, 61%RH, now: 2024-07-10T23:49:18Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-10T23:49:54.290497Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87961578",
"longitude": "-86.08267212",
"temperature": "25.97",
"humidity": "60.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132982/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132982
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-10T23:38:41.000Z, file: _track.qo, location(gps): 45.4978825,-73.69342578, 27.4C/0%RH, voltage: 3.78",
"created_at": "2024-07-10T23:39:14.682249Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978825",
"longitude": "-73.69342578",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132981/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132981
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-10T23:35:43.000Z, file: _track.qo, location(gps): 45.4979625,-73.69312109, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-10T23:39:13.777912Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979625",
"longitude": "-73.69312109",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132980/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132980
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-10T23:33:27.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 24.8C/0%RH, voltage: 4.04",
"created_at": "2024-07-10T23:33:51.559316Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "24.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132979/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132979
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-10T23:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.1C/0%RH, voltage: 4.23",
"created_at": "2024-07-10T23:31:55.889621Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132978/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132978
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.399days 2023-07-12T13:44:32Z 27C 81F, 50%RH, now: 2024-07-10T23:19:20Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-10T23:20:12.506554Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "27.27",
"humidity": "50.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132977/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132977
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-10T23:02:39.000Z, file: _track.qo, where_when: 2024-07-10T22:13:18.000Z, location(gps): 39.8799975,-86.08290234, 25.7C/62.4%RH, voltage: 5.43",
"created_at": "2024-07-10T23:03:00.608838Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "25.69",
"humidity": "62.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132976/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132976
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-10T22:52:51.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.8C/51.9%RH, voltage: 4.05",
"created_at": "2024-07-10T22:57:32.834415Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.78",
"humidity": "51.89",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132975/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132975
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-10T22:07:47.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.8C/51.3%RH, voltage: 4.04",
"created_at": "2024-07-10T22:57:32.654214Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.84",
"humidity": "51.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132974/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132974
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 363.917days 2023-07-13T00:48:49Z 26C 79F, 62%RH, now: 2024-07-10T22:49:18Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-10T22:49:52.414349Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88034058",
"longitude": "-86.08197784",
"temperature": "25.97",
"humidity": "61.74",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132973/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132973
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-10T22:47:20.000Z, file: _track.qo, location(gps): 45.4978225,-73.69328516, 25.5C/0%RH, voltage: 3.8",
"created_at": "2024-07-10T22:47:53.757579Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978225",
"longitude": "-73.69328516",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132972/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132972
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-10T22:33:27.000Z, file: _track.qo, location(gps): 45.4983725,-73.69349609, 25.1C/0%RH, voltage: 4.04",
"created_at": "2024-07-10T22:34:06.586104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983725",
"longitude": "-73.69349609",
"temperature": "25.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132971/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132971
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-10T22:31:18.000Z, file: _track.qo, location(gps): 50.6312575,3.08505859, 22.2C/0%RH, voltage: 4.23",
"created_at": "2024-07-10T22:31:55.033392Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312575",
"longitude": "3.08505859",
"temperature": "22.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132970/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132970
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 364.357days 2023-07-12T13:44:32Z 28C 83F, 46%RH, now: 2024-07-10T22:19:15Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-10T22:20:08.204405Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87985229",
"longitude": "-86.08250427",
"temperature": "28.37",
"humidity": "46.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132969/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132969
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-10T22:13:18.000Z, file: _track.qo, where_when: 2024-07-10T21:13:06.000Z, location(gps): 39.8799975,-86.08290234, 25.3C/63.3%RH, voltage: 5.42",
"created_at": "2024-07-10T22:13:39.402567Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799975",
"longitude": "-86.08290234",
"temperature": "25.31",
"humidity": "63.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132968/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132968
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-10T21:58:54.000Z, file: _track.qo, location(gps): 45.4980125,-73.69329297, 25.3C/0%RH, voltage: 3.8",
"created_at": "2024-07-10T21:59:24.580364Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69329297",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132967/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132967
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-10T21:22:51.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/50.6%RH, voltage: 4.05",
"created_at": "2024-07-10T21:57:35.670036Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.64",
"humidity": "50.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132966/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132966
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 363.875days 2023-07-13T00:48:49Z 26C 78F, 63%RH, now: 2024-07-10T21:49:17Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-10T21:49:52.506578Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87969589",
"longitude": "-86.08225250",
"temperature": "25.54",
"humidity": "62.73",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/132965/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 132965
}
]
}