HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 159078,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=937",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=935",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T16:54:10.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24C/48%RH, voltage: 5.39",
"created_at": "2024-07-20T16:57:12.989270Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24",
"humidity": "47.96",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134973/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134973
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T16:09:11.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24.3C/47.9%RH, voltage: 5.39",
"created_at": "2024-07-20T16:57:12.788142Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.27",
"humidity": "47.87",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134972/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134972
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T16:51:41.000Z, file: _track.qo, location(gps): 45.4980725,-73.69322266, 30.1C/0%RH, voltage: 5.18",
"created_at": "2024-07-20T16:52:11.119529Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69322266",
"temperature": "30.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134971/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134971
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.668days 2023-07-13T00:48:49Z 24C 74F, 56%RH, now: 2024-07-20T16:50:51Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T16:51:31.424077Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87981796",
"longitude": "-86.08244324",
"temperature": "23.56",
"humidity": "55.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134970/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134970
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T16:50:02.000Z, file: _track.qo, location(gps): 45.4983825,-73.69313672, 26.8C/0%RH, voltage: 5.26",
"created_at": "2024-07-20T16:50:27.310287Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983825",
"longitude": "-73.69313672",
"temperature": "26.77",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134969/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134969
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T16:49:36.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 26.7C/0%RH, voltage: 5.2",
"created_at": "2024-07-20T16:49:57.290035Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "26.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134968/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134968
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 374.122days 2023-07-12T13:44:32Z 26C 80F, 53%RH, now: 2024-07-20T16:39:39Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T16:40:22.849006Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.39",
"humidity": "52.54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134967/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134967
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T16:13:43.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.2C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T16:13:53.971114Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134966/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134966
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T15:24:11.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/48.1%RH, voltage: 5.39",
"created_at": "2024-07-20T15:57:11.979385Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.9",
"humidity": "48.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134965/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134965
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.626days 2023-07-13T00:48:49Z 23C 74F, 57%RH, now: 2024-07-20T15:50:50Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T15:51:30.586171Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87981796",
"longitude": "-86.08244324",
"temperature": "23.32",
"humidity": "56.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134964/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134964
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T15:49:53.000Z, file: _track.qo, location(gps): 45.4983825,-73.69313672, 30.5C/0%RH, voltage: 5.18",
"created_at": "2024-07-20T15:50:17.700268Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983825",
"longitude": "-73.69313672",
"temperature": "30.45",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134963/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134963
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T15:49:28.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 26.8C/0%RH, voltage: 5.2",
"created_at": "2024-07-20T15:49:47.153093Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "26.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134962/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134962
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T15:48:14.000Z, file: _track.qo, location(gps): 45.4980075,-73.69322266, 26.9C/0%RH, voltage: 5.25",
"created_at": "2024-07-20T15:48:36.522281Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69322266",
"temperature": "26.89",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134961/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134961
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 374.080days 2023-07-12T13:44:32Z 27C 81F, 47%RH, now: 2024-07-20T15:39:34Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T15:40:18.503833Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.16",
"humidity": "47.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134960/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134960
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T15:13:35.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.5C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T15:14:11.117923Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134959/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134959
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T14:58:24.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 22.8C/58.5%RH, voltage: 5.41",
"created_at": "2024-07-20T14:58:37.424519Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "22.78",
"humidity": "58.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134958/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134958
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T14:38:57.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/48.2%RH, voltage: 5.39",
"created_at": "2024-07-20T14:57:33.151040Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.86",
"humidity": "48.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134957/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134957
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.585days 2023-07-13T00:48:49Z 23C 73F, 58%RH, now: 2024-07-20T14:50:50Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T14:51:30.547315Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87981796",
"longitude": "-86.08244324",
"temperature": "22.98",
"humidity": "58.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134956/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134956
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T14:49:20.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 26.2C/0%RH, voltage: 5.2",
"created_at": "2024-07-20T14:49:44.898143Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134955/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134955
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T14:48:08.000Z, file: _track.qo, location(gps): 45.4980075,-73.69322266, 30.1C/0%RH, voltage: 5.17",
"created_at": "2024-07-20T14:48:37.704316Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69322266",
"temperature": "30.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134954/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134954
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T14:46:18.000Z, file: _track.qo, location(gps): 45.4981825,-73.69323828, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-07-20T14:46:44.816366Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981825",
"longitude": "-73.69323828",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134953/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134953
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 374.038days 2023-07-12T13:44:32Z 27C 80F, 48%RH, now: 2024-07-20T14:39:28Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T14:40:12.459900Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.51",
"humidity": "47.74",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134952/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134952
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T14:13:27.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.1C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T14:13:38.688991Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134951/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134951
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T13:58:15.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 22.4C/59.9%RH, voltage: 5.42",
"created_at": "2024-07-20T13:58:33.280439Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "22.38",
"humidity": "59.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134950/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134950
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T13:53:57.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/48.8%RH, voltage: 5.39",
"created_at": "2024-07-20T13:57:24.683413Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.61",
"humidity": "48.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134949/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134949
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T13:08:57.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.8C/49.2%RH, voltage: 5.39",
"created_at": "2024-07-20T13:57:24.494992Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.84",
"humidity": "49.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134948/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134948
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.543days 2023-07-13T00:48:49Z 22C 72F, 62%RH, now: 2024-07-20T13:50:50Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T13:51:29.972165Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87998581",
"longitude": "-86.08240509",
"temperature": "22.15",
"humidity": "61.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134947/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134947
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T13:49:12.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 26.2C/0%RH, voltage: 5.2",
"created_at": "2024-07-20T13:49:31.250530Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134946/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134946
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T13:46:09.000Z, file: _track.qo, location(gps): 45.4981825,-73.69323828, 29.7C/0%RH, voltage: 5.18",
"created_at": "2024-07-20T13:46:35.279775Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981825",
"longitude": "-73.69323828",
"temperature": "29.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134945/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134945
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T13:44:42.000Z, file: _track.qo, location(gps): 45.4979725,-73.69333203, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-07-20T13:45:01.842565Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979725",
"longitude": "-73.69333203",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134944/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134944
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.996days 2023-07-12T13:44:32Z 27C 80F, 47%RH, now: 2024-07-20T13:39:23Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T13:40:06.537702Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.59",
"humidity": "47.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134943/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134943
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T13:13:19.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T13:13:30.921054Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134942/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134942
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T13:09:11.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 21.9C/62.8%RH, voltage: 5.41",
"created_at": "2024-07-20T13:09:24.665704Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "21.88",
"humidity": "62.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134941/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134941
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T12:23:57.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 24C/49.8%RH, voltage: 5.39",
"created_at": "2024-07-20T13:06:44.139162Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "24.03",
"humidity": "49.76",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134940/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134940
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.501days 2023-07-13T00:48:49Z 21C 69F, 66%RH, now: 2024-07-20T12:50:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T12:51:29.781049Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87998581",
"longitude": "-86.08240509",
"temperature": "20.54",
"humidity": "66.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134939/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134939
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T12:49:04.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 26.4C/0%RH, voltage: 5.2",
"created_at": "2024-07-20T12:49:24.106267Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134938/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134938
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T12:44:35.000Z, file: _track.qo, location(gps): 45.4979725,-73.69333203, 29.7C/0%RH, voltage: 5.17",
"created_at": "2024-07-20T12:44:59.928216Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979725",
"longitude": "-73.69333203",
"temperature": "29.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134937/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134937
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T12:43:18.000Z, file: _track.qo, location(gps): 45.4979925,-73.69335547, 26.8C/0%RH, voltage: 5.26",
"created_at": "2024-07-20T12:43:37.054565Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69335547",
"temperature": "26.77",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134936/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134936
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T12:41:20.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 21.3C/65.3%RH, voltage: 5.41",
"created_at": "2024-07-20T12:41:33.636221Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "21.27",
"humidity": "65.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134935/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134935
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.955days 2023-07-12T13:44:32Z 27C 80F, 53%RH, now: 2024-07-20T12:39:18Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T12:40:03.519509Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.71",
"humidity": "52.80",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134934/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134934
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T12:13:11.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T12:13:22.711334Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134933/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134933
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.460days 2023-07-13T00:48:49Z 19C 67F, 71%RH, now: 2024-07-20T11:50:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T11:51:28.729162Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "19.38",
"humidity": "70.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134932/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134932
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T11:48:55.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 27.3C/0%RH, voltage: 5.19",
"created_at": "2024-07-20T11:49:15.148234Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "27.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134931/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134931
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T11:43:10.000Z, file: _track.qo, location(gps): 45.4979925,-73.69335547, 30C/0%RH, voltage: 5.16",
"created_at": "2024-07-20T11:43:38.425882Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69335547",
"temperature": "30",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134930/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134930
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T11:41:13.000Z, file: _track.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/50.6%RH, voltage: 5.35",
"created_at": "2024-07-20T11:41:49.128985Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.92",
"humidity": "50.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134929/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134929
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T11:38:57.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.9C/50.6%RH, voltage: 4.25",
"created_at": "2024-07-20T11:41:48.179041Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.92",
"humidity": "50.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134928/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134928
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T11:41:12.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.5046875,-73.69148438, voltage: 5.35",
"created_at": "2024-07-20T11:41:47.865316Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134927/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134927
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T11:41:10.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.5046875,-73.69148438, voltage: 5.32",
"created_at": "2024-07-20T11:41:47.396492Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134926/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134926
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T11:41:24.000Z, file: _track.qo, location(gps): 45.4980975,-73.69339453, 25.5C/0%RH, voltage: 5.18",
"created_at": "2024-07-20T11:41:44.936717Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980975",
"longitude": "-73.69339453",
"temperature": "25.47",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134925/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134925
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T11:41:22.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4980975,-73.69339453, voltage: 5.13",
"created_at": "2024-07-20T11:41:44.607265Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980975",
"longitude": "-73.69339453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134924/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134924
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T11:41:22.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 25.1C/0%RH, voltage: 5.14",
"created_at": "2024-07-20T11:41:40.371625Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "25.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134923/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134923
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T11:41:20.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4983775,-73.69341016, voltage: 5.14",
"created_at": "2024-07-20T11:41:40.015173Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134922/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134922
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T11:41:12.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 20C/70.3%RH, voltage: 5.41",
"created_at": "2024-07-20T11:41:26.416926Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "20",
"humidity": "70.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134921/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134921
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.913days 2023-07-12T13:44:32Z 27C 80F, 48%RH, now: 2024-07-20T11:39:12Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T11:39:57.431108Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.54",
"humidity": "48.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134920/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134920
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T11:14:48.000Z, file: _track.qo, location(gps): 45.4980975,-73.69339453, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T11:15:20.673584Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980975",
"longitude": "-73.69339453",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134919/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134919
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T11:13:03.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.1C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T11:13:15.722784Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134918/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134918
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T10:53:57.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 24.1C/50.9%RH, voltage: 4.25",
"created_at": "2024-07-20T10:57:23.461424Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "24.11",
"humidity": "50.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134917/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134917
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T10:08:58.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 23.7C/51.5%RH, voltage: 4.25",
"created_at": "2024-07-20T10:57:23.274614Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "23.68",
"humidity": "51.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134916/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134916
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.418days 2023-07-13T00:48:49Z 19C 65F, 70%RH, now: 2024-07-20T10:50:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T10:51:28.564052Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "18.57",
"humidity": "69.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134915/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134915
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T10:48:52.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 25.1C/0%RH, voltage: 4.25",
"created_at": "2024-07-20T10:49:15.236117Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "25.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134914/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134914
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T10:41:04.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 19.7C/68.2%RH, voltage: 5.41",
"created_at": "2024-07-20T10:41:17.681534Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "19.67",
"humidity": "68.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134913/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134913
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.871days 2023-07-12T13:44:32Z 27C 80F, 47%RH, now: 2024-07-20T10:39:07Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T10:39:53.037082Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.55",
"humidity": "47.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134912/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134912
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T10:26:10.000Z, file: _track.qo, location(gps): 45.4980475,-73.69331641, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T10:26:35.927195Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69331641",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134911/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134911
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T10:12:55.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.2C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T10:13:07.732876Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134910/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134910
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T09:23:57.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/51.4%RH, voltage: 4.26",
"created_at": "2024-07-20T09:57:23.300646Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.59",
"humidity": "51.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134909/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134909
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.376days 2023-07-13T00:48:49Z 18C 64F, 75%RH, now: 2024-07-20T09:50:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T09:51:29.706193Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "17.87",
"humidity": "74.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134908/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134908
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T09:48:52.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-07-20T09:49:14.081521Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134907/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134907
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T09:40:56.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 20.1C/67.6%RH, voltage: 5.41",
"created_at": "2024-07-20T09:41:10.391136Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "20.11",
"humidity": "67.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134906/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134906
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.830days 2023-07-12T13:44:32Z 27C 80F, 48%RH, now: 2024-07-20T09:39:02Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T09:39:51.143639Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.74",
"humidity": "47.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134905/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134905
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T09:37:37.000Z, file: _track.qo, location(gps): 45.4979925,-73.69313672, 25C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T09:38:03.387742Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979925",
"longitude": "-73.69313672",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134904/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134904
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T09:12:47.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.4C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T09:12:59.830460Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134903/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134903
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T08:38:58.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/51.2%RH, voltage: 4.26",
"created_at": "2024-07-20T08:57:22.031212Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.63",
"humidity": "51.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134902/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134902
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.335days 2023-07-13T00:48:49Z 18C 65F, 74%RH, now: 2024-07-20T08:50:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T08:51:28.291206Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "18.41",
"humidity": "73.61",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134901/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134901
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T08:48:57.000Z, file: _track.qo, location(gps): 45.4980275,-73.69322266, 25.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T08:49:27.162885Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980275",
"longitude": "-73.69322266",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134900/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134900
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T08:48:52.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-07-20T08:49:13.004358Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "24.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134899/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134899
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T08:40:48.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 20C/68.9%RH, voltage: 5.41",
"created_at": "2024-07-20T08:41:02.866700Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "19.97",
"humidity": "68.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134898/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134898
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.788days 2023-07-12T13:44:32Z 27C 81F, 46%RH, now: 2024-07-20T08:38:56Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T08:39:42.015811Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "27.32",
"humidity": "45.74",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134897/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134897
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T08:12:39.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.1C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T08:12:54.279533Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.06",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134896/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134896
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T08:00:16.000Z, file: _track.qo, location(gps): 45.4980525,-73.69341797, 25.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T08:00:46.612139Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980525",
"longitude": "-73.69341797",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134895/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134895
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T07:53:58.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/50.9%RH, voltage: 4.26",
"created_at": "2024-07-20T07:57:21.809690Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.62",
"humidity": "50.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134894/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134894
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T07:08:58.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.7C/50.7%RH, voltage: 4.26",
"created_at": "2024-07-20T07:57:21.625984Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.66",
"humidity": "50.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134893/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134893
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.293days 2023-07-13T00:48:49Z 19C 67F, 70%RH, now: 2024-07-20T07:50:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T07:51:27.637304Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "19.49",
"humidity": "70.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134892/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134892
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T07:48:52.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-07-20T07:49:18.013559Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134891/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134891
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T07:40:40.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 20.9C/66%RH, voltage: 5.41",
"created_at": "2024-07-20T07:40:54.421440Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "20.88",
"humidity": "66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134890/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134890
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.746days 2023-07-12T13:44:32Z 27C 80F, 47%RH, now: 2024-07-20T07:38:51Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T07:39:36.743436Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.76",
"humidity": "47.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134889/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134889
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T07:12:31.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.2C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T07:12:47.433788Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134888/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134888
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T07:11:40.000Z, file: _track.qo, location(gps): 45.4980975,-73.69327734, 25.3C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T07:12:11.633442Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980975",
"longitude": "-73.69327734",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134887/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134887
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T06:23:58.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.6C/50.5%RH, voltage: 4.27",
"created_at": "2024-07-20T06:57:22.381892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.59",
"humidity": "50.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134886/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134886
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.251days 2023-07-13T00:48:49Z 20C 68F, 69%RH, now: 2024-07-20T06:50:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T06:51:26.334297Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "19.91",
"humidity": "68.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134885/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134885
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T06:48:52.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 25C/0%RH, voltage: 4.25",
"created_at": "2024-07-20T06:49:12.125116Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134884/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134884
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T06:40:32.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 20.8C/66.5%RH, voltage: 5.41",
"created_at": "2024-07-20T06:40:48.019607Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "20.83",
"humidity": "66.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134883/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134883
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.704days 2023-07-12T13:44:32Z 27C 80F, 50%RH, now: 2024-07-20T06:38:46Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T06:39:31.642902Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.85",
"humidity": "50.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134882/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134882
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T06:22:46.000Z, file: _track.qo, location(gps): 45.4979475,-73.69316016, 25.1C/0%RH, voltage: 4.2",
"created_at": "2024-07-20T06:23:12.377221Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69316016",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134881/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134881
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-07-20T06:12:23.000Z, file: _track.qo, location(gps): 50.6286675,3.08577734, 27.7C/0%RH, voltage: 5.23",
"created_at": "2024-07-20T06:12:34.435139Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6286675",
"longitude": "3.08577734",
"temperature": "27.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134880/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134880
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-07-20T05:38:58.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 23.5C/50.3%RH, voltage: 4.26",
"created_at": "2024-07-20T05:57:20.921749Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "23.53",
"humidity": "50.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134879/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134879
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 373.210days 2023-07-13T00:48:49Z 20C 68F, 69%RH, now: 2024-07-20T05:50:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-07-20T05:51:26.985633Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88010788",
"longitude": "-86.08258820",
"temperature": "20.10",
"humidity": "68.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134878/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134878
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-07-20T05:48:48.000Z, file: _track.qo, location(gps): 45.4983775,-73.69341016, 24.9C/0%RH, voltage: 4.25",
"created_at": "2024-07-20T05:49:08.128160Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4983775",
"longitude": "-73.69341016",
"temperature": "24.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134877/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134877
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-07-20T05:40:24.000Z, file: _track.qo, where_when: 2024-07-15T23:08:50.000Z, location(gps): 39.8798275,-86.08209766, 20.9C/66.6%RH, voltage: 5.41",
"created_at": "2024-07-20T05:40:38.639941Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798275",
"longitude": "-86.08209766",
"temperature": "20.86",
"humidity": "66.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134876/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134876
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 373.663days 2023-07-12T13:44:32Z 27C 80F, 49%RH, now: 2024-07-20T05:38:40Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-07-20T05:39:26.692188Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08281708",
"temperature": "26.87",
"humidity": "49.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134875/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134875
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-07-20T05:34:29.000Z, file: _track.qo, location(gps): 45.4980075,-73.69311328, 25.3C/0%RH, voltage: 4.21",
"created_at": "2024-07-20T05:34:55.212758Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69311328",
"temperature": "25.34",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/134874/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 134874
}
]
}