HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 163976,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1348",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1346",
"results": [
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.645days 2023-07-12T13:44:32Z 17C 63F, 28%RH, now: 2024-01-16T05:13:11Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-16T05:14:07.024617Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.42",
"humidity": "27.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96248/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96248
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-16T05:07:53.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.4C/0%RH, voltage: 4.11",
"created_at": "2024-01-16T05:08:17.349443Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96247/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96247
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T04:53:10.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.4C/26.3%RH, voltage: 4.12",
"created_at": "2024-01-16T04:57:25.554379Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.37",
"humidity": "26.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96246/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96246
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T04:08:10.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.3C/26.4%RH, voltage: 4.1",
"created_at": "2024-01-16T04:57:25.371693Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.29",
"humidity": "26.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96245/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96245
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-16T04:47:43.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.2C/0%RH, voltage: 5.22",
"created_at": "2024-01-16T04:48:10.578782Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96244/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96244
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-16T04:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.7C/0%RH, voltage: 4.14",
"created_at": "2024-01-16T04:46:58.530726Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96243/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96243
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-16T04:39:50.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.3C/27%RH, voltage: 5.41",
"created_at": "2024-01-16T04:40:13.222912Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.31",
"humidity": "26.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96242/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96242
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 187.146days 2023-07-13T00:48:49Z 20C 69F, 27%RH, now: 2024-01-16T04:19:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-16T04:20:20.307687Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08196259",
"temperature": "20.41",
"humidity": "27.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96241/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96241
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-16T04:18:33.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.6C/0%RH, voltage: 4.11",
"created_at": "2024-01-16T04:19:01.107648Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.61",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96240/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96240
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.603days 2023-07-12T13:44:32Z 17C 63F, 27%RH, now: 2024-01-16T04:13:06Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-16T04:14:02.334772Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.40",
"humidity": "26.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96238/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96238
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T03:23:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.4C/26.5%RH, voltage: 4.12",
"created_at": "2024-01-16T03:57:21.459256Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.44",
"humidity": "26.52",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96237/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96237
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-16T03:47:35.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 17.9C/0%RH, voltage: 5.22",
"created_at": "2024-01-16T03:47:54.387619Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "17.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96236/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96236
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-16T03:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.6C/0%RH, voltage: 4.14",
"created_at": "2024-01-16T03:46:57.925723Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96235/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96235
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-16T03:39:42.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.3C/26.6%RH, voltage: 5.41",
"created_at": "2024-01-16T03:40:05.633683Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.33",
"humidity": "26.61",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96234/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96234
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-16T03:23:03.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.3C/0%RH, voltage: 4.12",
"created_at": "2024-01-16T03:23:27.234018Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.3",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96233/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96233
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 187.105days 2023-07-13T00:48:49Z 20C 69F, 27%RH, now: 2024-01-16T03:19:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-16T03:20:19.759169Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08196259",
"temperature": "20.47",
"humidity": "26.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96232/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96232
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.561days 2023-07-12T13:44:32Z 17C 63F, 26%RH, now: 2024-01-16T03:13:01Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-16T03:13:56.871735Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.40",
"humidity": "26.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96231/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96231
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T02:38:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.7%RH, voltage: 4.12",
"created_at": "2024-01-16T02:57:21.114104Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.47",
"humidity": "26.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96230/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96230
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-16T02:47:27.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 17.8C/0%RH, voltage: 5.22",
"created_at": "2024-01-16T02:47:53.241818Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "17.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96229/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96229
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-16T02:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.9C/0%RH, voltage: 4.14",
"created_at": "2024-01-16T02:46:57.712568Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96228/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96228
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-16T02:39:34.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.5C/27.2%RH, voltage: 5.41",
"created_at": "2024-01-16T02:39:58.134510Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.47",
"humidity": "27.2",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96227/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96227
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-16T02:20:14.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 26.8C/0%RH, voltage: 4.12",
"created_at": "2024-01-16T02:20:37.576532Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "26.77",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96226/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96226
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 187.063days 2023-07-13T00:48:49Z 20C 69F, 28%RH, now: 2024-01-16T02:19:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-16T02:20:19.094718Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08196259",
"temperature": "20.40",
"humidity": "27.70",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96225/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96225
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.520days 2023-07-12T13:44:32Z 17C 63F, 27%RH, now: 2024-01-16T02:12:55Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-16T02:13:51.466006Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.49",
"humidity": "26.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96224/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96224
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T01:53:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.9%RH, voltage: 4.13",
"created_at": "2024-01-16T01:57:20.248823Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.48",
"humidity": "26.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96223/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96223
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T01:08:14.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.5%RH, voltage: 4.1",
"created_at": "2024-01-16T01:57:20.065432Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.47",
"humidity": "26.52",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96222/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96222
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-16T01:47:19.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18C/0%RH, voltage: 5.22",
"created_at": "2024-01-16T01:47:38.778684Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96221/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96221
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-16T01:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.9C/0%RH, voltage: 4.14",
"created_at": "2024-01-16T01:46:57.879566Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96220/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96220
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-16T01:39:26.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.6C/28.8%RH, voltage: 5.41",
"created_at": "2024-01-16T01:39:49.687906Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.56",
"humidity": "28.8",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96219/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96219
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-16T01:24:39.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.1C/0%RH, voltage: 4.12",
"created_at": "2024-01-16T01:25:05.542192Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96218/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96218
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 187.021days 2023-07-13T00:48:49Z 20C 68F, 30%RH, now: 2024-01-16T01:19:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-16T01:20:19.060192Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08196259",
"temperature": "20.05",
"humidity": "29.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96217/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96217
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.478days 2023-07-12T13:44:32Z 18C 64F, 27%RH, now: 2024-01-16T01:12:50Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-16T01:13:47.074475Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.70",
"humidity": "26.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96215/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96215
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-16T00:23:18.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/26.1%RH, voltage: 4.13",
"created_at": "2024-01-16T00:57:19.087725Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.56",
"humidity": "26.15",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96214/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96214
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-16T00:47:11.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 17.5C/0%RH, voltage: 5.22",
"created_at": "2024-01-16T00:47:30.490822Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "17.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96213/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96213
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-16T00:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.8C/0%RH, voltage: 4.14",
"created_at": "2024-01-16T00:46:56.224614Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96212/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96212
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-16T00:39:18.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.4C/26.8%RH, voltage: 5.41",
"created_at": "2024-01-16T00:39:42.869555Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.39",
"humidity": "26.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96211/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96211
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-16T00:21:50.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 28.3C/0%RH, voltage: 4.13",
"created_at": "2024-01-16T00:22:15.041125Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "28.27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96210/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96210
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.980days 2023-07-13T00:48:49Z 20C 68F, 27%RH, now: 2024-01-16T00:19:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-16T00:20:18.785021Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08196259",
"temperature": "20.18",
"humidity": "26.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96209/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96209
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.436days 2023-07-12T13:44:32Z 18C 65F, 27%RH, now: 2024-01-16T00:12:45Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-16T00:13:41.147207Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "18.25",
"humidity": "26.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96207/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96207
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T23:38:18.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.3%RH, voltage: 4.14",
"created_at": "2024-01-15T23:57:19.208941Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.49",
"humidity": "26.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96206/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96206
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T23:47:03.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 17.3C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T23:47:30.496580Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "17.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96205/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96205
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T23:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.8C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T23:46:57.337942Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96204/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96204
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T23:39:09.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.6C/26.6%RH, voltage: 5.41",
"created_at": "2024-01-15T23:39:33.717093Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.59",
"humidity": "26.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96203/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96203
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T23:32:33.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 28.3C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T23:32:56.866468Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "28.27",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96202/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96202
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T23:23:18.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.5C/26.3%RH, voltage: 5.41",
"created_at": "2024-01-15T23:23:44.084533Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.55",
"humidity": "26.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96201/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96201
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.938days 2023-07-13T00:48:49Z 20C 68F, 27%RH, now: 2024-01-15T23:19:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T23:20:17.782740Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87995148",
"longitude": "-86.08196259",
"temperature": "20.09",
"humidity": "26.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96200/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96200
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.395days 2023-07-12T13:44:32Z 17C 63F, 27%RH, now: 2024-01-15T23:12:39Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T23:13:36.327272Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.44",
"humidity": "26.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96198/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96198
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T22:53:18.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.4%RH, voltage: 4.12",
"created_at": "2024-01-15T22:57:22.663064Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.5",
"humidity": "26.39",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96197/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96197
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T22:08:22.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/26.4%RH, voltage: 4.13",
"created_at": "2024-01-15T22:57:22.479120Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.57",
"humidity": "26.37",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96196/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96196
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T22:46:55.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 17.8C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T22:47:21.474669Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "17.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96195/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96195
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T22:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 19.2C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T22:46:56.621405Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "19.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96194/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96194
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T22:39:22.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.5C/27.2%RH, voltage: 5.41",
"created_at": "2024-01-15T22:39:46.310902Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.5",
"humidity": "27.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96193/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96193
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T22:39:23.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.6C/0%RH, voltage: 4.18",
"created_at": "2024-01-15T22:39:40.832076Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.61",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96192/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96192
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.896days 2023-07-13T00:48:49Z 20C 68F, 27%RH, now: 2024-01-15T22:19:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T22:20:17.941444Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970734",
"longitude": "-86.08238983",
"temperature": "20.03",
"humidity": "27.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96191/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96191
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.353days 2023-07-12T13:44:32Z 17C 63F, 26%RH, now: 2024-01-15T22:12:34Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T22:13:30.936567Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.42",
"humidity": "26.07",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96189/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96189
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T21:23:16.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/26.2%RH, voltage: 4.13",
"created_at": "2024-01-15T21:57:27.428143Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.57",
"humidity": "26.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96188/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96188
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T21:46:47.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.8C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T21:47:08.314846Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96187/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96187
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T21:46:20.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 19.2C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T21:46:55.694157Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "19.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96186/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96186
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T21:39:13.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.6C/27.1%RH, voltage: 5.41",
"created_at": "2024-01-15T21:39:37.528704Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.58",
"humidity": "27.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96185/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96185
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T21:27:51.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.5C/0%RH, voltage: 4.13",
"created_at": "2024-01-15T21:28:22.359244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.53",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96184/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96184
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.855days 2023-07-13T00:48:49Z 20C 68F, 27%RH, now: 2024-01-15T21:19:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T21:20:17.552628Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970734",
"longitude": "-86.08238983",
"temperature": "20.13",
"humidity": "27.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96183/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96183
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.311days 2023-07-12T13:44:32Z 17C 63F, 28%RH, now: 2024-01-15T21:12:52Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T21:13:31.678189Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.46",
"humidity": "27.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96181/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96181
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T21:09:37.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.4C/26.2%RH, voltage: 5.41",
"created_at": "2024-01-15T21:09:44.046510Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.44",
"humidity": "26.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96180/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96180
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T20:38:12.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.7C/26.2%RH, voltage: 4.13",
"created_at": "2024-01-15T20:57:22.354017Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.66",
"humidity": "26.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96179/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96179
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T20:46:19.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 19C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T20:47:06.596469Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96178/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96178
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T20:46:38.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.7C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T20:46:58.301662Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96177/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96177
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T20:25:03.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.4C/0%RH, voltage: 4.19",
"created_at": "2024-01-15T20:25:21.497732Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96176/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96176
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.813days 2023-07-13T00:48:49Z 20C 68F, 27%RH, now: 2024-01-15T20:19:32Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T20:20:22.220613Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970734",
"longitude": "-86.08238983",
"temperature": "20.14",
"humidity": "27.15",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96175/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96175
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.270days 2023-07-12T13:44:32Z 17C 63F, 25%RH, now: 2024-01-15T20:12:47Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T20:13:20.461572Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.44",
"humidity": "25.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96173/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96173
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T20:09:29.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.6C/26.4%RH, voltage: 5.41",
"created_at": "2024-01-15T20:09:32.977168Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.58",
"humidity": "26.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96172/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96172
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T19:53:16.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.7C/26.4%RH, voltage: 4.12",
"created_at": "2024-01-15T19:57:22.770188Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.7",
"humidity": "26.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96171/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96171
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T19:08:12.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/26.5%RH, voltage: 4.11",
"created_at": "2024-01-15T19:57:22.579145Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.62",
"humidity": "26.53",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96170/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96170
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T19:46:19.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 19.1C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T19:47:01.490832Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "19.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96169/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96169
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T19:46:30.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.4C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T19:46:40.018394Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96168/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96168
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T18:46:22.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.9C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T19:46:39.846606Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96167/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96167
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T19:25:00.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.7C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T19:25:23.280635Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96166/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96166
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.771days 2023-07-13T00:48:49Z 20C 68F, 27%RH, now: 2024-01-15T19:19:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T19:20:16.520333Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970734",
"longitude": "-86.08238983",
"temperature": "20.13",
"humidity": "27.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96165/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96165
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.228days 2023-07-12T13:44:32Z 18C 64F, 25%RH, now: 2024-01-15T19:12:41Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T19:13:15.613975Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "17.58",
"humidity": "25.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96163/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96163
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T19:09:21.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.5C/26.8%RH, voltage: 5.41",
"created_at": "2024-01-15T19:09:23.094016Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.48",
"humidity": "26.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96162/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96162
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T18:23:12.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.6C/26.6%RH, voltage: 4.12",
"created_at": "2024-01-15T18:57:21.933462Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.65",
"humidity": "26.6",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96161/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96161
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T18:46:19.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.9C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T18:47:01.919461Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96160/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96160
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.730days 2023-07-13T00:48:49Z 20C 68F, 28%RH, now: 2024-01-15T18:19:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T18:20:16.257018Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87970734",
"longitude": "-86.08238983",
"temperature": "20.09",
"humidity": "27.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96159/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96159
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.186days 2023-07-12T13:44:32Z 18C 64F, 25%RH, now: 2024-01-15T18:12:36Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T18:13:10.261405Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "18.00",
"humidity": "24.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96157/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96157
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T18:11:04.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.6C/0%RH, voltage: 4.15",
"created_at": "2024-01-15T18:11:30.686875Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.61",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96156/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96156
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T18:09:12.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.4C/27.1%RH, voltage: 5.41",
"created_at": "2024-01-15T18:09:14.212034Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.44",
"humidity": "27.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96155/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96155
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T17:38:12.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.8C/26.7%RH, voltage: 4.13",
"created_at": "2024-01-15T17:57:20.872134Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.78",
"humidity": "26.71",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96154/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96154
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T17:46:19.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 19.2C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T17:47:00.879692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "19.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96153/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96153
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T17:46:14.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.8C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T17:46:23.818209Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96152/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96152
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T17:42:32.000Z, file: _track.qo, where_when: 2024-01-15T17:42:31.000Z, location(gps): 39.8800225,-86.08237891, 20.2C/27.9%RH, voltage: 5.35",
"created_at": "2024-01-15T17:42:48.811164Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800225",
"longitude": "-86.08237891",
"temperature": "20.2",
"humidity": "27.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96151/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96151
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.688days 2023-07-13T00:48:49Z 20C 68F, 28%RH, now: 2024-01-15T17:19:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T17:20:16.064053Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87997818",
"longitude": "-86.08261108",
"temperature": "20.26",
"humidity": "28.42",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96150/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96150
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 187.144days 2023-07-12T13:44:32Z 18C 65F, 25%RH, now: 2024-01-15T17:12:31Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-01-15T17:13:04.881780Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87937546",
"longitude": "-86.08328247",
"temperature": "18.15",
"humidity": "25.00",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96148/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96148
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T17:08:23.000Z, file: _track.qo, where_when: 2024-01-15T17:08:22.000Z, location(gps): 39.8800125,-86.08216797, 20.5C/28%RH, voltage: 5.36",
"created_at": "2024-01-15T17:08:41.290610Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8800125",
"longitude": "-86.08216797",
"temperature": "20.52",
"humidity": "28.05",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96147/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96147
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T17:08:12.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 30.8C/0%RH, voltage: 4.13",
"created_at": "2024-01-15T17:08:38.653290Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "30.78",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96146/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96146
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-01-15T17:05:57.000Z, file: _track.qo, location(tower): -33.4375875,-70.62148438, 27.7C/0%RH, voltage: 4.15",
"created_at": "2024-01-15T17:06:20.895660Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "-33.4375875",
"longitude": "-70.62148438",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96145/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96145
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T16:53:08.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.5%RH, voltage: 4.13",
"created_at": "2024-01-15T16:57:21.436906Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.49",
"humidity": "26.46",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96144/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96144
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-01-15T16:08:04.000Z, file: _temp.qo, where_when: 2023-12-26T20:01:45.000Z, location(tower): 39.8798375,-86.08255078, 20.5C/26.5%RH, voltage: 4.11",
"created_at": "2024-01-15T16:57:21.261888Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798375",
"longitude": "-86.08255078",
"temperature": "20.5",
"humidity": "26.45",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96143/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96143
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-01-15T16:46:19.000Z, file: _track.qo, location(gps): 45.4980075,-73.69331641, 18.9C/0%RH, voltage: 4.14",
"created_at": "2024-01-15T16:47:02.741242Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980075",
"longitude": "-73.69331641",
"temperature": "18.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96142/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96142
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-01-15T16:46:06.000Z, file: _track.qo, location(gps): 50.6312075,3.08507422, 18.7C/0%RH, voltage: 5.22",
"created_at": "2024-01-15T16:46:15.919884Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6312075",
"longitude": "3.08507422",
"temperature": "18.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96141/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96141
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-01-15T16:39:12.000Z, file: _track.qo, where_when: 2024-01-15T16:08:30.000Z, location(gps): 39.8799475,-86.08265234, 20.7C/26.8%RH, voltage: 5.41",
"created_at": "2024-01-15T16:39:14.510843Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799475",
"longitude": "-86.08265234",
"temperature": "20.66",
"humidity": "26.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96140/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96140
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 186.646days 2023-07-13T00:48:49Z 20C 68F, 28%RH, now: 2024-01-15T16:19:30Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-01-15T16:20:15.379534Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88000488",
"longitude": "-86.08268738",
"temperature": "20.22",
"humidity": "27.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/96139/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 96139
}
]
}