HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 182731,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1328",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1326",
"results": [
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T05:46:41.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21C/0%RH, voltage: 4.25",
"created_at": "2024-05-03T05:47:18.829129Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119388/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119388
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T05:42:43.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 23.7C/55.1%RH, voltage: 5.42",
"created_at": "2024-05-03T05:43:06.744343Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "23.69",
"humidity": "55.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119387/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119387
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 295.201days 2023-07-13T00:48:49Z 24C 76F, 53%RH, now: 2024-05-03T05:37:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-03T05:38:23.914833Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88004684",
"longitude": "-86.08196259",
"temperature": "24.17",
"humidity": "53.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119386/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119386
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T05:34:55.000Z, file: _track.qo, location(gps): 45.4980575,-73.69319141, 21.6C/0%RH, voltage: 4.21",
"created_at": "2024-05-03T05:35:16.632685Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980575",
"longitude": "-73.69319141",
"temperature": "21.58",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119385/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119385
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-03T05:20:17.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.2C/0%RH, voltage: 5.22",
"created_at": "2024-05-03T05:20:39.707930Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119384/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119384
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.634days 2023-07-12T13:44:32Z 22C 71F, 60%RH, now: 2024-05-03T04:56:47Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-03T04:57:44.813313Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.58",
"humidity": "60.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119382/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119382
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T04:56:01.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.1C/50.5%RH, voltage: 4.26",
"created_at": "2024-05-03T04:57:19.935032Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.06",
"humidity": "50.47",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119381/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119381
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T04:11:01.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.2C/50.4%RH, voltage: 4.26",
"created_at": "2024-05-03T04:57:19.692655Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.21",
"humidity": "50.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119380/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119380
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T04:46:41.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 20.8C/0%RH, voltage: 4.25",
"created_at": "2024-05-03T04:47:16.788222Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "20.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119379/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119379
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T04:46:35.000Z, file: _track.qo, location(gps): 45.4979675,-73.69327734, 21.9C/0%RH, voltage: 4.21",
"created_at": "2024-05-03T04:46:56.588318Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979675",
"longitude": "-73.69327734",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119378/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119378
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T04:42:35.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 23.8C/55.2%RH, voltage: 5.42",
"created_at": "2024-05-03T04:42:57.715693Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "23.8",
"humidity": "55.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119377/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119377
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 295.159days 2023-07-13T00:48:49Z 24C 76F, 53%RH, now: 2024-05-03T04:37:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-03T04:38:21.492929Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87998581",
"longitude": "-86.08252716",
"temperature": "24.26",
"humidity": "53.38",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119376/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119376
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-03T04:20:09.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 19.9C/0%RH, voltage: 5.22",
"created_at": "2024-05-03T04:20:31.238930Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119375/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119375
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T03:58:03.000Z, file: _track.qo, location(gps): 45.4979525,-73.69346484, 22.1C/0%RH, voltage: 4.21",
"created_at": "2024-05-03T03:58:25.076825Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979525",
"longitude": "-73.69346484",
"temperature": "22.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119373/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119373
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.592days 2023-07-12T13:44:32Z 22C 72F, 58%RH, now: 2024-05-03T03:56:42Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-03T03:57:37.834892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "22.06",
"humidity": "58.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119372/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119372
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T03:26:02.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.4C/50.3%RH, voltage: 4.27",
"created_at": "2024-05-03T03:57:18.468553Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.41",
"humidity": "50.27",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119371/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119371
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T03:46:41.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-03T03:47:17.402217Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119370/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119370
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T03:42:27.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 23.9C/54.9%RH, voltage: 5.41",
"created_at": "2024-05-03T03:42:50.306414Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "23.94",
"humidity": "54.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119369/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119369
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 295.117days 2023-07-13T00:48:49Z 24C 76F, 53%RH, now: 2024-05-03T03:37:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-03T03:38:23.202980Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87998581",
"longitude": "-86.08252716",
"temperature": "24.42",
"humidity": "53.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119368/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119368
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-03T03:20:01.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20C/0%RH, voltage: 5.23",
"created_at": "2024-05-03T03:20:34.485948Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119367/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119367
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T03:09:32.000Z, file: _track.qo, location(gps): 45.4980625,-73.69323047, 22.4C/0%RH, voltage: 4.21",
"created_at": "2024-05-03T03:09:54.149592Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69323047",
"temperature": "22.36",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119366/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119366
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.550days 2023-07-12T13:44:32Z 21C 70F, 60%RH, now: 2024-05-03T02:56:36Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-03T02:57:32.650300Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.32",
"humidity": "60.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119364/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119364
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T02:41:01.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.7C/50.1%RH, voltage: 4.27",
"created_at": "2024-05-03T02:57:18.521293Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.73",
"humidity": "50.13",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119363/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119363
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T02:46:41.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-03T02:47:17.031109Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119362/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119362
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T02:42:19.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 24.1C/54.9%RH, voltage: 5.42",
"created_at": "2024-05-03T02:42:42.761755Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "24.11",
"humidity": "54.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119361/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119361
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 295.076days 2023-07-13T00:48:49Z 25C 76F, 53%RH, now: 2024-05-03T02:37:45Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-03T02:38:19.317990Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87998581",
"longitude": "-86.08252716",
"temperature": "24.59",
"humidity": "53.18",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119360/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119360
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T02:20:55.000Z, file: _track.qo, location(gps): 45.4980725,-73.69326953, 25.1C/0%RH, voltage: 4.17",
"created_at": "2024-05-03T02:21:16.556088Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980725",
"longitude": "-73.69326953",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119359/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119359
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-03T02:19:53.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.4C/0%RH, voltage: 5.23",
"created_at": "2024-05-03T02:20:21.585553Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119358/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119358
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T02:19:11.000Z, file: _track.qo, where_when: , location(tower): 45.5030375,-73.69660938, 20.9C/50.1%RH, voltage: 4.25",
"created_at": "2024-05-03T02:20:02.434266Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5030375",
"longitude": "-73.69660938",
"temperature": "20.94",
"humidity": "50.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119357/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119357
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T02:19:10.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.5030375,-73.69660938, voltage: 4.25",
"created_at": "2024-05-03T02:20:01.969409Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5030375",
"longitude": "-73.69660938",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119356/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119356
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T02:19:08.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.5030375,-73.69660938, voltage: 4.26",
"created_at": "2024-05-03T02:20:01.411176Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5030375",
"longitude": "-73.69660938",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119355/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119355
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T02:19:15.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 23.2C/0%RH, voltage: 4.2",
"created_at": "2024-05-03T02:19:48.378980Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "23.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119354/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119354
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T02:19:13.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979825,-73.69328516, voltage: 4.2",
"created_at": "2024-05-03T02:19:48.019615Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119353/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119353
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T02:19:17.000Z, file: _track.qo, location(gps): 45.4981025,-73.69341016, 23.7C/0%RH, voltage: 4.21",
"created_at": "2024-05-03T02:19:31.242855Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981025",
"longitude": "-73.69341016",
"temperature": "23.72",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119352/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119352
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T02:19:15.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4981025,-73.69341016, voltage: 4.21",
"created_at": "2024-05-03T02:19:31.030360Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981025",
"longitude": "-73.69341016",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119351/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119351
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T02:09:35.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 24.2C/54.8%RH, voltage: 5.42",
"created_at": "2024-05-03T02:09:58.301201Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "24.25",
"humidity": "54.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119350/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119350
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T02:02:39.000Z, file: _track.qo, location(gps): 45.4981025,-73.69341016, 26.6C/0%RH, voltage: 5.17",
"created_at": "2024-05-03T02:03:00.873764Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981025",
"longitude": "-73.69341016",
"temperature": "26.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119349/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119349
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T02:01:24.000Z, file: _track.qo, location(gps): 45.4982625,-73.69333203, 24.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-03T02:01:38.036801Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982625",
"longitude": "-73.69333203",
"temperature": "24.17",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119348/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119348
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.508days 2023-07-12T13:44:32Z 21C 70F, 60%RH, now: 2024-05-03T01:56:31Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-03T01:57:27.086795Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.28",
"humidity": "60.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119346/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119346
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T01:56:02.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21C/50.2%RH, voltage: 5.39",
"created_at": "2024-05-03T01:57:17.522202Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.97",
"humidity": "50.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119345/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119345
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T01:11:02.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 21C/50%RH, voltage: 5.39",
"created_at": "2024-05-03T01:57:17.339091Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "21.05",
"humidity": "50.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119344/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119344
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T01:46:41.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 23.4C/0%RH, voltage: 5.2",
"created_at": "2024-05-03T01:46:57.421051Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "23.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119343/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119343
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 295.034days 2023-07-13T00:48:49Z 25C 77F, 53%RH, now: 2024-05-03T01:37:44Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-03T01:38:21.268922Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88002396",
"longitude": "-86.08259583",
"temperature": "24.83",
"humidity": "52.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119342/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119342
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-03T01:19:45.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.5C/0%RH, voltage: 5.23",
"created_at": "2024-05-03T01:20:07.289704Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119341/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119341
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T01:09:27.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 24.5C/54.1%RH, voltage: 5.42",
"created_at": "2024-05-03T01:09:50.402373Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "24.48",
"humidity": "54.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119340/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119340
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T01:01:17.000Z, file: _track.qo, location(gps): 45.4982625,-73.69333203, 27.1C/0%RH, voltage: 5.18",
"created_at": "2024-05-03T01:01:38.036526Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4982625",
"longitude": "-73.69333203",
"temperature": "27.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119339/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119339
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-03T00:59:52.000Z, file: _track.qo, location(gps): 45.4979475,-73.69321484, 24.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-03T01:00:07.182603Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69321484",
"temperature": "24.17",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119338/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119338
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.467days 2023-07-12T13:44:32Z 21C 70F, 60%RH, now: 2024-05-03T00:56:26Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-03T00:57:21.897638Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.22",
"humidity": "59.68",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119336/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119336
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-03T00:26:02.000Z, file: _temp.qo, where_when: , location(tower): 45.5046875,-73.69148438, 21.1C/49.8%RH, voltage: 5.39",
"created_at": "2024-05-03T00:57:16.557947Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.5046875",
"longitude": "-73.69148438",
"temperature": "21.13",
"humidity": "49.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119335/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119335
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-03T00:46:33.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 23.8C/0%RH, voltage: 5.2",
"created_at": "2024-05-03T00:46:52.723795Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "23.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119334/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119334
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 294.992days 2023-07-13T00:48:49Z 25C 77F, 53%RH, now: 2024-05-03T00:37:44Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-03T00:38:17.441132Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88002396",
"longitude": "-86.08259583",
"temperature": "25.00",
"humidity": "52.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119333/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119333
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-03T00:19:37.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.6C/0%RH, voltage: 5.22",
"created_at": "2024-05-03T00:19:59.098233Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119332/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119332
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-03T00:09:19.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 24.8C/53.1%RH, voltage: 5.42",
"created_at": "2024-05-03T00:09:46.833743Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "24.81",
"humidity": "53.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119331/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119331
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T23:59:45.000Z, file: _track.qo, location(gps): 45.4979475,-73.69321484, 27.1C/0%RH, voltage: 5.14",
"created_at": "2024-05-03T00:00:05.202600Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69321484",
"temperature": "27.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119330/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119330
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T23:57:57.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.5C/50.2%RH, voltage: 5.35",
"created_at": "2024-05-02T23:58:24.647080Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.5",
"humidity": "50.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119328/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119328
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T23:57:56.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.34",
"created_at": "2024-05-02T23:58:24.560134Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119327/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119327
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T23:57:54.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.3",
"created_at": "2024-05-02T23:58:24.374925Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119326/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119326
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T23:58:04.000Z, file: _track.qo, location(gps): 45.4979475,-73.69342578, 24.5C/0%RH, voltage: 5.12",
"created_at": "2024-05-02T23:58:22.768558Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69342578",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119325/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119325
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T23:58:02.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979475,-73.69342578, voltage: 5.04",
"created_at": "2024-05-02T23:58:22.586962Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69342578",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119324/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119324
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T23:58:00.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.6C/0%RH, voltage: 5.14",
"created_at": "2024-05-02T23:58:15.100731Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119323/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119323
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T23:57:58.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4979825,-73.69328516, voltage: 5.13",
"created_at": "2024-05-02T23:58:14.802198Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119322/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119322
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T23:41:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.6C/50%RH, voltage: 4.25",
"created_at": "2024-05-02T23:57:23.970884Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.55",
"humidity": "49.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119321/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119321
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.425days 2023-07-12T13:44:32Z 21C 70F, 60%RH, now: 2024-05-02T23:56:20Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-02T23:57:17.040596Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.14",
"humidity": "59.80",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119320/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119320
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T23:46:25.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.4C/0%RH, voltage: 4.24",
"created_at": "2024-05-02T23:47:02.270066Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119319/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119319
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 294.951days 2023-07-13T00:48:49Z 25C 77F, 52%RH, now: 2024-05-02T23:37:44Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-02T23:38:19.595650Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87981796",
"longitude": "-86.08229828",
"temperature": "25.07",
"humidity": "51.83",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119318/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119318
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-02T23:19:29.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.7C/0%RH, voltage: 5.23",
"created_at": "2024-05-02T23:19:51.301987Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119317/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119317
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-02T22:19:21.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-02T23:19:51.109750Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119316/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119316
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T23:09:34.000Z, file: _track.qo, location(gps): 45.4979475,-73.69342578, 21.9C/0%RH, voltage: 4.18",
"created_at": "2024-05-02T23:09:56.243690Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979475",
"longitude": "-73.69342578",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119315/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119315
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-02T23:09:09.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 24.8C/53.8%RH, voltage: 5.42",
"created_at": "2024-05-02T23:09:33.080084Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "24.81",
"humidity": "53.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119314/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119314
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T22:56:12.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.6C/49.8%RH, voltage: 4.25",
"created_at": "2024-05-02T22:57:23.268099Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.61",
"humidity": "49.79",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119312/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119312
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T22:11:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.7C/49.6%RH, voltage: 4.22",
"created_at": "2024-05-02T22:57:23.088307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.66",
"humidity": "49.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119311/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119311
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.383days 2023-07-12T13:44:32Z 21C 70F, 60%RH, now: 2024-05-02T22:56:15Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-02T22:57:11.510974Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.07",
"humidity": "59.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119310/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119310
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T22:46:25.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.6C/0%RH, voltage: 4.24",
"created_at": "2024-05-02T22:47:09.988526Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119309/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119309
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-02T22:39:32.000Z, file: _track.qo, where_when: 2024-05-02T22:39:31.000Z, location(gps): 39.8796025,-86.08254297, 24.7C/52.8%RH, voltage: 5.36",
"created_at": "2024-05-02T22:40:09.282646Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796025",
"longitude": "-86.08254297",
"temperature": "24.7",
"humidity": "52.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119308/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119308
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 294.909days 2023-07-13T00:48:49Z 25C 77F, 52%RH, now: 2024-05-02T22:37:43Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-02T22:38:16.767933Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87997818",
"longitude": "-86.08254242",
"temperature": "24.85",
"humidity": "51.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119307/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119307
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T22:21:05.000Z, file: _track.qo, location(gps): 45.4980425,-73.69324609, 22.1C/0%RH, voltage: 4.19",
"created_at": "2024-05-02T22:21:27.164014Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980425",
"longitude": "-73.69324609",
"temperature": "22.09",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119306/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119306
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-02T22:13:47.000Z, file: _track.qo, where_when: 2024-05-01T15:01:39.000Z, location(gps): 39.8799125,-86.08243359, 24.5C/53.9%RH, voltage: 5.42",
"created_at": "2024-05-02T22:14:11.348068Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08243359",
"temperature": "24.47",
"humidity": "53.94",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119305/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119305
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T21:26:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.7C/49.6%RH, voltage: 4.25",
"created_at": "2024-05-02T21:57:23.333346Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.7",
"humidity": "49.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119303/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119303
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.341days 2023-07-12T13:44:32Z 21C 70F, 59%RH, now: 2024-05-02T21:56:10Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-02T21:57:06.395817Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.20",
"humidity": "59.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119302/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119302
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T21:46:25.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.5C/0%RH, voltage: 4.24",
"created_at": "2024-05-02T21:47:04.117099Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119301/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119301
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 294.867days 2023-07-13T00:48:49Z 24C 76F, 53%RH, now: 2024-05-02T21:37:43Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-02T21:38:18.314143Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87999344",
"longitude": "-86.08238220",
"temperature": "24.24",
"humidity": "52.54",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119300/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119300
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T21:32:13.000Z, file: _track.qo, location(gps): 45.4979975,-73.69319922, 21.9C/0%RH, voltage: 4.19",
"created_at": "2024-05-02T21:32:34.986521Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69319922",
"temperature": "21.91",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119299/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119299
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-02T21:19:13.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.7C/0%RH, voltage: 5.22",
"created_at": "2024-05-02T21:19:35.300893Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119298/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119298
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-02T21:13:39.000Z, file: _track.qo, where_when: 2024-05-01T15:01:39.000Z, location(gps): 39.8799125,-86.08243359, 23.8C/55.3%RH, voltage: 5.42",
"created_at": "2024-05-02T21:14:03.025648Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08243359",
"temperature": "23.75",
"humidity": "55.31",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119297/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119297
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T20:41:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.7C/49.7%RH, voltage: 4.25",
"created_at": "2024-05-02T20:57:22.647966Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.73",
"humidity": "49.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119295/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119295
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.300days 2023-07-12T13:44:32Z 22C 71F, 57%RH, now: 2024-05-02T20:56:04Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-02T20:57:01.143508Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.69",
"humidity": "56.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119294/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119294
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T20:46:25.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.7C/0%RH, voltage: 4.24",
"created_at": "2024-05-02T20:47:01.342461Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119293/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119293
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T20:43:40.000Z, file: _track.qo, location(gps): 45.4979975,-73.69333203, 22.4C/0%RH, voltage: 4.19",
"created_at": "2024-05-02T20:44:02.167308Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979975",
"longitude": "-73.69333203",
"temperature": "22.42",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119292/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119292
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 294.826days 2023-07-13T00:48:49Z 23C 74F, 52%RH, now: 2024-05-02T20:37:43Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-02T20:38:17.526933Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87999344",
"longitude": "-86.08238220",
"temperature": "23.24",
"humidity": "52.04",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119291/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119291
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-02T20:19:05.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.9C/0%RH, voltage: 5.23",
"created_at": "2024-05-02T20:19:27.422920Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119290/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119290
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-02T20:13:31.000Z, file: _track.qo, where_when: 2024-05-01T15:01:39.000Z, location(gps): 39.8799125,-86.08243359, 22.5C/54.1%RH, voltage: 5.41",
"created_at": "2024-05-02T20:13:54.663277Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08243359",
"temperature": "22.52",
"humidity": "54.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119289/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119289
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T19:56:12.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.8C/49.7%RH, voltage: 4.25",
"created_at": "2024-05-02T19:57:21.551919Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.77",
"humidity": "49.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119287/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119287
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-02T19:11:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 20.8C/50%RH, voltage: 4.25",
"created_at": "2024-05-02T19:57:21.365759Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "20.83",
"humidity": "50.01",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119286/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119286
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 295.258days 2023-07-12T13:44:32Z 21C 69F, 59%RH, now: 2024-05-02T19:55:59Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-02T19:56:56.050697Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "20.77",
"humidity": "58.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119285/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119285
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T19:55:06.000Z, file: _track.qo, location(gps): 45.4977925,-73.69320703, 22.2C/0%RH, voltage: 4.19",
"created_at": "2024-05-02T19:55:27.968951Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977925",
"longitude": "-73.69320703",
"temperature": "22.22",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119284/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119284
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-02T19:46:23.000Z, file: _track.qo, location(gps): 45.4979825,-73.69328516, 21.4C/0%RH, voltage: 4.24",
"created_at": "2024-05-02T19:47:07.968057Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979825",
"longitude": "-73.69328516",
"temperature": "21.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119283/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119283
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 294.784days 2023-07-13T00:48:49Z 23C 73F, 52%RH, now: 2024-05-02T19:37:38Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-02T19:38:26.912154Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87999344",
"longitude": "-86.08238220",
"temperature": "22.80",
"humidity": "51.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119282/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119282
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-02T19:18:59.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 20.7C/0%RH, voltage: 5.22",
"created_at": "2024-05-02T19:19:24.132068Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "20.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119281/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119281
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-02T19:13:23.000Z, file: _track.qo, where_when: 2024-05-01T15:01:39.000Z, location(gps): 39.8799125,-86.08243359, 22.2C/53.7%RH, voltage: 5.41",
"created_at": "2024-05-02T19:13:45.777816Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8799125",
"longitude": "-86.08243359",
"temperature": "22.16",
"humidity": "53.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119280/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119280
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-02T19:06:46.000Z, file: _track.qo, location(gps): 45.4980125,-73.69341797, 24.6C/0%RH, voltage: 4.17",
"created_at": "2024-05-02T19:07:08.275847Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69341797",
"temperature": "24.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/119279/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 119279
}
]
}