HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 160433,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1080",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1078",
"results": [
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T08:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 23.6C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T08:47:01.145815Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "23.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122027/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122027
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T08:40:15.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.4C/61.3%RH, voltage: 5.41",
"created_at": "2024-05-15T08:40:37.772163Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.39",
"humidity": "61.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122026/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122026
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.327days 2023-07-13T00:48:49Z 21C 69F, 59%RH, now: 2024-05-15T08:39:50Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T08:40:24.084432Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "20.75",
"humidity": "59.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122025/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122025
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.776days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T08:21:58Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T08:22:52.781686Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87764359",
"longitude": "-86.08227539",
"temperature": "21.05",
"humidity": "63.76",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122024/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122024
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T08:11:15.000Z, file: _track.qo, location(gps): 45.4979725,-73.69329297, 24.2C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T08:11:40.224703Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979725",
"longitude": "-73.69329297",
"temperature": "24.17",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122023/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122023
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T07:58:54.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.3C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T07:59:15.377616Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122022/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122022
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T07:57:07.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.6C/51.6%RH, voltage: 4.26",
"created_at": "2024-05-15T07:57:19.185056Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.6",
"humidity": "51.6",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122021/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122021
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T07:12:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.7C/51.5%RH, voltage: 4.27",
"created_at": "2024-05-15T07:57:18.984085Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.75",
"humidity": "51.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122020/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122020
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T07:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 23.9C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T07:47:01.121537Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "23.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122019/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122019
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T07:40:07.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.5C/61.2%RH, voltage: 5.41",
"created_at": "2024-05-15T07:40:29.598307Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.5",
"humidity": "61.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122018/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122018
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.285days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T07:39:50Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T07:40:23.801644Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "20.84",
"humidity": "59.28",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122017/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122017
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T07:22:55.000Z, file: _track.qo, location(gps): 45.4981075,-73.69312109, 24.4C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T07:23:18.952102Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981075",
"longitude": "-73.69312109",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122016/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122016
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.734days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T07:21:53Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T07:22:47.539318Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87974930",
"longitude": "-86.08448029",
"temperature": "21.08",
"humidity": "63.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122015/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122015
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T06:58:46.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T06:59:16.999943Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122014/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122014
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T06:27:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 22.9C/51.3%RH, voltage: 4.27",
"created_at": "2024-05-15T06:57:18.865451Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.94",
"humidity": "51.33",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122013/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122013
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T06:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 24.1C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T06:47:00.212422Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122012/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122012
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.244days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T06:39:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T06:40:23.073835Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "20.97",
"humidity": "59.11",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122011/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122011
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T06:39:59.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.6C/61.2%RH, voltage: 5.41",
"created_at": "2024-05-15T06:40:22.103464Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.58",
"humidity": "61.19",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122010/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122010
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T06:34:10.000Z, file: _track.qo, location(gps): 45.4980625,-73.69333203, 24.4C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T06:34:34.130829Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69333203",
"temperature": "24.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122009/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122009
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.693days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T06:21:48Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T06:22:42.660643Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.01",
"humidity": "64.17",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122008/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122008
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T05:58:38.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T05:59:02.382061Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122007/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122007
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T05:42:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.1C/51.1%RH, voltage: 4.26",
"created_at": "2024-05-15T05:57:16.501873Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.11",
"humidity": "51.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122006/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122006
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T05:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 24.1C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T05:47:01.483063Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "24.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122005/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122005
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T05:45:15.000Z, file: _track.qo, location(gps): 45.4979725,-73.69339453, 24.7C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T05:45:39.160855Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979725",
"longitude": "-73.69339453",
"temperature": "24.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122004/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122004
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.202days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T05:39:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T05:40:22.447301Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.07",
"humidity": "59.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122003/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122003
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T05:39:51.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.7C/61.1%RH, voltage: 5.41",
"created_at": "2024-05-15T05:40:14.443991Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.69",
"humidity": "61.06",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122002/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122002
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.651days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T05:21:42Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T05:22:37.186323Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.04",
"humidity": "63.99",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122001/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122001
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T04:58:30.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.6C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T04:59:04.322341Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/122000/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 122000
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T04:57:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.3C/50.8%RH, voltage: 4.26",
"created_at": "2024-05-15T04:57:16.850847Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.3",
"humidity": "50.78",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121999/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121999
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T04:12:09.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/50.4%RH, voltage: 4.27",
"created_at": "2024-05-15T04:57:16.652804Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.51",
"humidity": "50.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121998/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121998
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T04:56:29.000Z, file: _track.qo, location(gps): 45.4978575,-73.69255078, 24.5C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T04:56:52.543442Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978575",
"longitude": "-73.69255078",
"temperature": "24.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121997/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121997
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T04:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 24.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T04:47:01.049935Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "24.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121996/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121996
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.160days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T04:39:49Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T04:40:20.812181Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.13",
"humidity": "59.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121995/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121995
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T04:39:43.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.8C/61.2%RH, voltage: 5.41",
"created_at": "2024-05-15T04:40:06.022498Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.75",
"humidity": "61.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121994/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121994
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.609days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T04:21:37Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T04:22:32.741237Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.14",
"humidity": "63.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121993/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121993
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T04:07:38.000Z, file: _track.qo, location(gps): 45.4980125,-73.69314453, 25C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T04:07:59.844733Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69314453",
"temperature": "25.02",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121992/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121992
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T03:58:22.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.6C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T03:58:44.148692Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.62",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121991/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121991
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T03:27:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.8C/49.9%RH, voltage: 4.27",
"created_at": "2024-05-15T03:57:17.527826Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.79",
"humidity": "49.86",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121990/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121990
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T03:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 24.8C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T03:47:02.603940Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "24.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121989/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121989
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.119days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T03:39:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T03:40:21.836333Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.19",
"humidity": "59.02",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121988/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121988
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T03:39:35.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.8C/61%RH, voltage: 5.41",
"created_at": "2024-05-15T03:39:58.189427Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.83",
"humidity": "60.97",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121987/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121987
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.567days 2023-07-12T13:44:32Z 21C 71F, 62%RH, now: 2024-05-15T03:21:32Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T03:22:26.968651Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.46",
"humidity": "62.40",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121986/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121986
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T03:19:06.000Z, file: _track.qo, location(gps): 45.4978775,-73.69372266, 25.1C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T03:19:30.093310Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978775",
"longitude": "-73.69372266",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121985/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121985
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T02:58:14.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T02:58:47.345721Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121984/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121984
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T02:42:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 24.4C/49.3%RH, voltage: 4.26",
"created_at": "2024-05-15T02:57:16.353246Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "24.36",
"humidity": "49.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121983/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121983
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T02:46:25.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 25.2C/0%RH, voltage: 4.25",
"created_at": "2024-05-15T02:47:02.257532Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "25.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121982/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121982
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.077days 2023-07-13T00:48:49Z 21C 70F, 59%RH, now: 2024-05-15T02:39:48Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T02:40:24.314904Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.32",
"humidity": "58.90",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121981/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121981
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T02:39:27.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 20.9C/60.8%RH, voltage: 5.41",
"created_at": "2024-05-15T02:39:52.066579Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "20.94",
"humidity": "60.84",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121980/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121980
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T02:30:41.000Z, file: _track.qo, location(gps): 45.4980475,-73.69326172, 27.5C/0%RH, voltage: 4.19",
"created_at": "2024-05-15T02:31:04.933146Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69326172",
"temperature": "27.53",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121979/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121979
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T02:28:59.000Z, file: _track.qo, where_when: , location(tower): 45.4938875,-73.69292188, 24.5C/49.2%RH, voltage: 4.26",
"created_at": "2024-05-15T02:29:45.304430Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "24.53",
"humidity": "49.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121978/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121978
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T02:28:58.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.26",
"created_at": "2024-05-15T02:29:45.194315Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121977/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121977
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T02:28:56.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4938875,-73.69292188, voltage: 4.26",
"created_at": "2024-05-15T02:29:44.968623Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121976/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121976
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T02:29:00.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 26.2C/0%RH, voltage: 4.2",
"created_at": "2024-05-15T02:29:33.359212Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121975/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121975
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T02:28:58.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4980125,-73.69330078, voltage: 4.19",
"created_at": "2024-05-15T02:29:33.103857Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121974/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121974
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T02:28:59.000Z, file: _track.qo, location(gps): 45.4979175,-73.69324609, 26.4C/0%RH, voltage: 4.21",
"created_at": "2024-05-15T02:29:16.253907Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69324609",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121973/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121973
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T02:28:57.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979175,-73.69324609, voltage: 4.21",
"created_at": "2024-05-15T02:29:16.042392Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69324609",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121972/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121972
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.526days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T02:21:26Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T02:22:23.076039Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.01",
"humidity": "64.21",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121971/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121971
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T01:58:33.000Z, file: _track.qo, location(gps): 45.4979175,-73.69324609, 29.2C/0%RH, voltage: 5.18",
"created_at": "2024-05-15T01:58:56.973350Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979175",
"longitude": "-73.69324609",
"temperature": "29.16",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121970/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121970
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T01:58:06.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T01:58:30.195332Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121969/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121969
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T01:57:15.000Z, file: _track.qo, location(gps): 45.4980475,-73.69330078, 26.2C/0%RH, voltage: 5.25",
"created_at": "2024-05-15T01:57:31.790311Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69330078",
"temperature": "26.23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121968/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121968
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T01:57:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.3C/49.9%RH, voltage: 5.33",
"created_at": "2024-05-15T01:57:14.593910Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.32",
"humidity": "49.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121967/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121967
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T01:12:09.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.5C/49.6%RH, voltage: 5.39",
"created_at": "2024-05-15T01:57:14.387213Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.45",
"humidity": "49.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121966/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121966
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T01:46:23.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 26.1C/0%RH, voltage: 5.2",
"created_at": "2024-05-15T01:46:41.074121Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "26.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121965/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121965
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 307.035days 2023-07-13T00:48:49Z 21C 71F, 59%RH, now: 2024-05-15T01:39:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T01:40:21.258415Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.49",
"humidity": "58.63",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121964/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121964
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T01:39:19.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 21.1C/60.7%RH, voltage: 5.41",
"created_at": "2024-05-15T01:39:42.381603Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "21.09",
"humidity": "60.69",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121963/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121963
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.484days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T01:21:21Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T01:22:16.587648Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.02",
"humidity": "64.08",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121962/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121962
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T01:15:45.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 26.3C/0%RH, voltage: 5.2",
"created_at": "2024-05-15T01:16:02.550257Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "26.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121961/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121961
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-15T00:57:58.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23C/0%RH, voltage: 5.23",
"created_at": "2024-05-15T00:58:19.922111Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121960/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121960
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T00:57:09.000Z, file: _track.qo, location(gps): 45.4980475,-73.69330078, 30C/0%RH, voltage: 5.18",
"created_at": "2024-05-15T00:57:31.612196Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980475",
"longitude": "-73.69330078",
"temperature": "30",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121959/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121959
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-15T00:27:09.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.2C/49.6%RH, voltage: 5.39",
"created_at": "2024-05-15T00:57:15.335574Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.23",
"humidity": "49.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121958/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121958
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-15T00:55:23.000Z, file: _track.qo, location(gps): 45.4979025,-73.69324609, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-15T00:55:41.454055Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979025",
"longitude": "-73.69324609",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121957/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121957
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 306.994days 2023-07-13T00:48:49Z 22C 71F, 59%RH, now: 2024-05-15T00:39:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-15T00:40:24.177737Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.61",
"humidity": "58.77",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121956/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121956
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T00:39:10.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 21.2C/60.8%RH, voltage: 5.41",
"created_at": "2024-05-15T00:39:33.315330Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "21.2",
"humidity": "60.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121955/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121955
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.442days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-15T00:21:16Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-15T00:22:11.092802Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.02",
"humidity": "63.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121954/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121954
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-15T00:15:37.000Z, file: _track.qo, location(gps): 45.4980125,-73.69330078, 26.2C/0%RH, voltage: 5.12",
"created_at": "2024-05-15T00:16:00.409462Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69330078",
"temperature": "26.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121953/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121953
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-15T00:11:50.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 21.2C/60.7%RH, voltage: 5.41",
"created_at": "2024-05-15T00:12:15.910237Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "21.25",
"humidity": "60.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121952/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121952
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-14T23:57:50.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 22.8C/0%RH, voltage: 5.23",
"created_at": "2024-05-14T23:58:21.624251Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "22.81",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121951/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121951
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T23:42:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4938875,-73.69292188, 23.8C/49.4%RH, voltage: 5.39",
"created_at": "2024-05-14T23:57:13.158409Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4938875",
"longitude": "-73.69292188",
"temperature": "23.84",
"humidity": "49.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121950/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121950
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-14T23:55:15.000Z, file: _track.qo, location(gps): 45.4979025,-73.69324609, 29.4C/0%RH, voltage: 5.18",
"created_at": "2024-05-14T23:55:38.608964Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979025",
"longitude": "-73.69324609",
"temperature": "29.36",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121949/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121949
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-14T23:53:55.000Z, file: _track.qo, location(gps): 45.4980125,-73.69331641, 26.4C/0%RH, voltage: 5.26",
"created_at": "2024-05-14T23:54:12.151593Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69331641",
"temperature": "26.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121948/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121948
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-14T23:50:29.000Z, file: _track.qo, location(gps): 45.4980625,-73.69320703, 25.7C/0%RH, voltage: 5.2",
"created_at": "2024-05-14T23:50:46.677244Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69320703",
"temperature": "25.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121947/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121947
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 306.952days 2023-07-13T00:48:49Z 22C 71F, 59%RH, now: 2024-05-14T23:39:47Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-14T23:40:19.386005Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.74",
"humidity": "58.67",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121946/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121946
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-14T23:39:19.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 21.3C/60.7%RH, voltage: 5.41",
"created_at": "2024-05-14T23:39:42.706642Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "21.31",
"humidity": "60.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121945/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121945
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.400days 2023-07-12T13:44:32Z 21C 70F, 64%RH, now: 2024-05-14T23:21:10Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-14T23:22:06.119088Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.02",
"humidity": "63.57",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121944/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121944
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-14T22:57:42.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-14T22:58:12.113529Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121943/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121943
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T22:57:09.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.6C/49.5%RH, voltage: 5.33",
"created_at": "2024-05-14T22:57:12.935893Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.59",
"humidity": "49.49",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121942/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121942
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T22:12:08.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23.5C/49.6%RH, voltage: 5.39",
"created_at": "2024-05-14T22:57:12.750548Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.46",
"humidity": "49.56",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121941/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121941
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-14T22:53:46.000Z, file: _track.qo, location(gps): 45.4980125,-73.69331641, 29C/0%RH, voltage: 5.18",
"created_at": "2024-05-14T22:54:09.779848Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69331641",
"temperature": "29.03",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121940/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121940
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-14T22:52:27.000Z, file: _track.qo, location(gps): 45.4980375,-73.69321484, 26.1C/0%RH, voltage: 5.25",
"created_at": "2024-05-14T22:52:45.300166Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69321484",
"temperature": "26.11",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121939/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121939
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-05-14T22:50:21.000Z, file: _track.qo, location(gps): 45.4980625,-73.69320703, 25.5C/0%RH, voltage: 5.2",
"created_at": "2024-05-14T22:50:41.946382Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980625",
"longitude": "-73.69320703",
"temperature": "25.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121938/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121938
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 306.910days 2023-07-13T00:48:49Z 22C 71F, 59%RH, now: 2024-05-14T22:39:46Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-05-14T22:40:20.946297Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87993240",
"longitude": "-86.08244324",
"temperature": "21.86",
"humidity": "58.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121937/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121937
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-14T22:39:10.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 21.5C/61%RH, voltage: 5.42",
"created_at": "2024-05-14T22:39:33.962013Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "21.45",
"humidity": "61.03",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121936/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121936
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 307.359days 2023-07-12T13:44:32Z 21C 70F, 63%RH, now: 2024-05-14T22:21:05Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-05-14T22:22:00.846358Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08362579",
"temperature": "21.04",
"humidity": "62.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121935/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121935
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-05-14T22:09:29.000Z, file: _track.qo, where_when: 2024-05-14T12:10:33.000Z, location(gps): 39.8796775,-86.08259766, 21.4C/60.5%RH, voltage: 5.41",
"created_at": "2024-05-14T22:09:44.376186Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8796775",
"longitude": "-86.08259766",
"temperature": "21.44",
"humidity": "60.5",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121934/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121934
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-05-14T21:57:35.000Z, file: _track.qo, location(tower): 50.6321375,3.08198438, 23.2C/0%RH, voltage: 5.23",
"created_at": "2024-05-14T21:57:56.753460Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6321375",
"longitude": "3.08198438",
"temperature": "23.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121933/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121933
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T21:55:55.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/49.2%RH, voltage: 5.35",
"created_at": "2024-05-14T21:57:15.075724Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.03",
"humidity": "49.22",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121932/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121932
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T21:27:11.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 23C/49.1%RH, voltage: 4.25",
"created_at": "2024-05-14T21:57:14.666526Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "22.99",
"humidity": "49.14",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121931/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121931
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T21:55:54.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.35",
"created_at": "2024-05-14T21:57:14.553150Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121930/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121930
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-05-14T21:55:52.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.35",
"created_at": "2024-05-14T21:57:14.356101Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121929/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121929
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-05-14T21:55:59.000Z, file: _track.qo, location(gps): 45.4980375,-73.69321484, 25.1C/0%RH, voltage: 5.17",
"created_at": "2024-05-14T21:56:15.945323Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980375",
"longitude": "-73.69321484",
"temperature": "25.14",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/121928/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 121928
}
]
}