HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 159948,
"next": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1029",
"previous": "http://arduino.johnedstone.net/api/v1/reports/?format=api&ordering=-created_at&page=1027",
"results": [
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-07T02:46:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 25.1C/45.9%RH, voltage: 5.39",
"created_at": "2024-06-07T02:49:42.633671Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "25.07",
"humidity": "45.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126643/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126643
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-07T02:01:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 25C/45.9%RH, voltage: 5.38",
"created_at": "2024-06-07T02:49:42.527900Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "25.04",
"humidity": "45.85",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126642/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126642
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-07T02:48:57.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4984625,-73.70301562, voltage: 4.25",
"created_at": "2024-06-07T02:49:42.434742Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126641/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126641
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-07T02:48:55.000Z, file: _health.qo, why: USB power OFF {usb-disabled}, location(tower): 45.4984625,-73.70301562, voltage: 4.26",
"created_at": "2024-06-07T02:49:42.234812Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126640/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126640
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-07T02:48:59.000Z, file: _track.qo, location(gps): 45.4979375,-73.69339453, 27.1C/0%RH, voltage: 4.2",
"created_at": "2024-06-07T02:49:17.741093Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69339453",
"temperature": "27.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126639/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126639
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T02:49:01.000Z, file: _track.qo, location(gps): 45.4980125,-73.69322266, 27.4C/0%RH, voltage: 4.21",
"created_at": "2024-06-07T02:49:17.731693Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69322266",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126638/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126638
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T02:48:59.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4980125,-73.69322266, voltage: 4.21",
"created_at": "2024-06-07T02:49:17.539340Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69322266",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126637/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126637
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-07T02:48:57.000Z, why: USB power OFF {usb-disabled}, location(gps): 45.4979375,-73.69339453, voltage: 4.2",
"created_at": "2024-06-07T02:49:17.528894Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69339453",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126636/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126636
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 330.080days 2023-07-13T00:48:49Z 24C 76F, 53%RH, now: 2024-06-07T02:43:32Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-07T02:44:13.909969Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.37",
"humidity": "53.30",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126635/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126635
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T02:34:41.000Z, file: _track.qo, location(gps): 45.4980125,-73.69322266, 30.3C/0%RH, voltage: 5.18",
"created_at": "2024-06-07T02:35:03.969597Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980125",
"longitude": "-73.69322266",
"temperature": "30.33",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126634/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126634
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T02:33:29.000Z, file: _track.qo, location(gps): 45.4977475,-73.69391016, 27.7C/0%RH, voltage: 5.26",
"created_at": "2024-06-07T02:33:46.218456Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977475",
"longitude": "-73.69391016",
"temperature": "27.73",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126633/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126633
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-07T02:18:06.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.8C/52.6%RH, voltage: 5.42",
"created_at": "2024-06-07T02:18:23.431020Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.81",
"humidity": "52.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126632/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126632
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.517days 2023-07-12T13:44:32Z 26C 78F, 52%RH, now: 2024-06-07T02:09:07Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-07T02:09:59.170819Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "25.69",
"humidity": "52.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126631/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126631
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-07T02:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 20.2C/0%RH, voltage: 4.05",
"created_at": "2024-06-07T02:05:10.099706Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "20.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126630/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126630
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-07T01:16:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.7C/45.7%RH, voltage: 5.39",
"created_at": "2024-06-07T01:57:16.587605Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.68",
"humidity": "45.65",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126629/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126629
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-07T01:56:11.000Z, file: _track.qo, location(gps): 45.4979375,-73.69339453, 27.4C/0%RH, voltage: 5.2",
"created_at": "2024-06-07T01:56:30.978685Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69339453",
"temperature": "27.44",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126628/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126628
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 330.038days 2023-07-13T00:48:49Z 24C 76F, 53%RH, now: 2024-06-07T01:43:32Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-07T01:44:10.209235Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.41",
"humidity": "52.61",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126627/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126627
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T01:33:20.000Z, file: _track.qo, location(gps): 45.4977475,-73.69391016, 30.1C/0%RH, voltage: 5.18",
"created_at": "2024-06-07T01:33:43.874475Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4977475",
"longitude": "-73.69391016",
"temperature": "30.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126626/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126626
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T01:32:09.000Z, file: _track.qo, location(gps): 45.4981075,-73.69321484, 27.5C/0%RH, voltage: 5.25",
"created_at": "2024-06-07T01:32:26.575046Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981075",
"longitude": "-73.69321484",
"temperature": "27.53",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126625/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126625
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-07T01:17:58.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.9C/52.2%RH, voltage: 5.42",
"created_at": "2024-06-07T01:18:15.473193Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.91",
"humidity": "52.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126624/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126624
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.475days 2023-07-12T13:44:32Z 26C 78F, 48%RH, now: 2024-06-07T01:09:01Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-07T01:09:53.800411Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "25.70",
"humidity": "47.95",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126623/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126623
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-07T01:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.9C/0%RH, voltage: 4.05",
"created_at": "2024-06-07T01:05:22.701139Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126622/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126622
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-07T00:31:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.5C/45.2%RH, voltage: 5.39",
"created_at": "2024-06-07T00:57:17.733683Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.53",
"humidity": "45.24",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126621/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126621
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-07T00:56:04.000Z, file: _track.qo, location(gps): 45.4979375,-73.69339453, 26.9C/0%RH, voltage: 5.2",
"created_at": "2024-06-07T00:56:23.185766Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69339453",
"temperature": "26.94",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126620/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126620
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.996days 2023-07-13T00:48:49Z 25C 76F, 52%RH, now: 2024-06-07T00:43:32Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-07T00:44:14.908259Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.56",
"humidity": "52.35",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126619/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126619
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T00:32:00.000Z, file: _track.qo, location(gps): 45.4981075,-73.69321484, 30.1C/0%RH, voltage: 5.18",
"created_at": "2024-06-07T00:32:24.646408Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981075",
"longitude": "-73.69321484",
"temperature": "30.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126618/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126618
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-07T00:30:41.000Z, file: _track.qo, location(gps): 45.4980875,-73.69348047, 27.4C/0%RH, voltage: 5.26",
"created_at": "2024-06-07T00:30:58.959524Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980875",
"longitude": "-73.69348047",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126617/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126617
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-07T00:17:50.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 24.1C/54.9%RH, voltage: 5.42",
"created_at": "2024-06-07T00:18:07.844132Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "24.06",
"humidity": "54.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126616/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126616
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-07T00:15:48.000Z, file: _track.qo, location(gps): 45.4979375,-73.69339453, 27.2C/0%RH, voltage: 5.12",
"created_at": "2024-06-07T00:16:17.232578Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4979375",
"longitude": "-73.69339453",
"temperature": "27.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126615/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126615
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.434days 2023-07-12T13:44:32Z 26C 78F, 53%RH, now: 2024-06-07T00:08:56Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-07T00:09:48.712191Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "25.78",
"humidity": "52.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126614/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126614
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-07T00:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.9C/0%RH, voltage: 4.05",
"created_at": "2024-06-07T00:05:10.137123Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126613/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126613
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T23:46:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.1C/45.4%RH, voltage: 5.39",
"created_at": "2024-06-06T23:57:16.432289Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.14",
"humidity": "45.44",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126612/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126612
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T23:01:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4984625,-73.70301562, 24.2C/45.3%RH, voltage: 5.38",
"created_at": "2024-06-06T23:57:16.214952Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4984625",
"longitude": "-73.70301562",
"temperature": "24.18",
"humidity": "45.3",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126611/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126611
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T23:53:28.000Z, file: _track.qo, location(gps): 45.4980025,-73.69329297, 26.6C/0%RH, voltage: 5.13",
"created_at": "2024-06-06T23:53:54.289357Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980025",
"longitude": "-73.69329297",
"temperature": "26.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126610/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126610
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.955days 2023-07-13T00:48:49Z 25C 76F, 54%RH, now: 2024-06-06T23:43:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T23:44:09.428646Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.67",
"humidity": "53.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126609/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126609
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T23:30:31.000Z, file: _track.qo, location(gps): 45.4980875,-73.69348047, 29.8C/0%RH, voltage: 5.17",
"created_at": "2024-06-06T23:30:54.663899Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980875",
"longitude": "-73.69348047",
"temperature": "29.8",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126608/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126608
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T23:29:13.000Z, file: _track.qo, location(gps): 45.4981675,-73.69331641, 26.9C/0%RH, voltage: 5.25",
"created_at": "2024-06-06T23:29:30.196100Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981675",
"longitude": "-73.69331641",
"temperature": "26.89",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126607/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126607
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T23:17:42.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 24.1C/55%RH, voltage: 5.42",
"created_at": "2024-06-06T23:17:59.428788Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "24.12",
"humidity": "55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126606/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126606
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T23:16:27.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 26.9C/0%RH, voltage: 5.2",
"created_at": "2024-06-06T23:16:51.561298Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "26.88",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126605/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126605
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.392days 2023-07-12T13:44:32Z 26C 79F, 48%RH, now: 2024-06-06T23:08:51Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T23:09:43.380722Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "25.84",
"humidity": "48.26",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126604/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126604
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T23:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 20C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T23:05:12.546670Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "20",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126603/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126603
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T22:16:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.4C/44.9%RH, voltage: 5.39",
"created_at": "2024-06-06T22:57:15.634220Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.41",
"humidity": "44.92",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126602/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126602
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.913days 2023-07-13T00:48:49Z 25C 76F, 55%RH, now: 2024-06-06T22:43:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T22:44:18.724206Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.72",
"humidity": "54.93",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126601/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126601
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T22:29:05.000Z, file: _track.qo, location(gps): 45.4981675,-73.69331641, 29.5C/0%RH, voltage: 5.18",
"created_at": "2024-06-06T22:29:29.335246Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981675",
"longitude": "-73.69331641",
"temperature": "29.48",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126600/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126600
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T22:28:01.000Z, file: _track.qo, location(gps): 45.4976525,-73.69341016, 26.9C/0%RH, voltage: 5.25",
"created_at": "2024-06-06T22:28:19.125641Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4976525",
"longitude": "-73.69341016",
"temperature": "26.89",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126599/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126599
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T22:17:34.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 24.1C/55.2%RH, voltage: 5.42",
"created_at": "2024-06-06T22:17:52.283912Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "24.12",
"humidity": "55.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126598/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126598
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T22:16:21.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 26.6C/0%RH, voltage: 5.2",
"created_at": "2024-06-06T22:16:41.876669Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "26.56",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126597/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126597
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.350days 2023-07-12T13:44:32Z 26C 79F, 52%RH, now: 2024-06-06T22:08:45Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T22:09:38.473602Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "26.08",
"humidity": "51.98",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126596/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126596
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T22:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.8C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T22:05:23.032278Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126595/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126595
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T21:31:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.3C/45.1%RH, voltage: 5.39",
"created_at": "2024-06-06T21:57:15.143772Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.33",
"humidity": "45.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126594/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126594
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T21:47:11.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 26.8C/0%RH, voltage: 5.2",
"created_at": "2024-06-06T21:47:31.507625Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "26.75",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126593/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126593
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.871days 2023-07-13T00:48:49Z 25C 76F, 55%RH, now: 2024-06-06T21:43:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T21:44:09.668852Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.71",
"humidity": "54.82",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126592/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126592
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T21:27:54.000Z, file: _track.qo, location(gps): 45.4976525,-73.69341016, 30.3C/0%RH, voltage: 5.18",
"created_at": "2024-06-06T21:28:18.626260Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4976525",
"longitude": "-73.69341016",
"temperature": "30.33",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126591/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126591
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T21:26:33.000Z, file: _track.qo, location(gps): 45.4980825,-73.69322266, 27.4C/0%RH, voltage: 5.26",
"created_at": "2024-06-06T21:26:48.341488Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980825",
"longitude": "-73.69322266",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126590/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126590
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T21:17:26.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 24.1C/55.2%RH, voltage: 5.42",
"created_at": "2024-06-06T21:17:43.688925Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "24.12",
"humidity": "55.25",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126589/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126589
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.308days 2023-07-12T13:44:32Z 27C 80F, 48%RH, now: 2024-06-06T21:08:40Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T21:09:33.041834Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "26.71",
"humidity": "47.72",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126588/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126588
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T21:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.7C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T21:05:14.689358Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.69",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126587/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126587
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T20:46:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.7C/44.9%RH, voltage: 5.39",
"created_at": "2024-06-06T20:57:14.998042Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.71",
"humidity": "44.86",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126586/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126586
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T20:01:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.9C/44.9%RH, voltage: 5.38",
"created_at": "2024-06-06T20:57:14.761226Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.85",
"humidity": "44.88",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126585/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126585
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T20:47:04.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 27.3C/0%RH, voltage: 5.2",
"created_at": "2024-06-06T20:47:24.431385Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "27.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126584/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126584
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.830days 2023-07-13T00:48:49Z 25C 76F, 56%RH, now: 2024-06-06T20:43:31Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T20:44:09.670324Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.61",
"humidity": "56.09",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126583/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126583
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T20:26:26.000Z, file: _track.qo, location(gps): 45.4980825,-73.69322266, 31C/0%RH, voltage: 5.18",
"created_at": "2024-06-06T20:26:49.959119Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4980825",
"longitude": "-73.69322266",
"temperature": "30.98",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126582/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126582
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T20:24:49.000Z, file: _track.qo, location(gps): 45.4974875,-73.69352734, 27.9C/0%RH, voltage: 5.26",
"created_at": "2024-06-06T20:25:06.525723Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4974875",
"longitude": "-73.69352734",
"temperature": "27.86",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126581/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126581
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T20:17:18.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 24C/58.2%RH, voltage: 5.42",
"created_at": "2024-06-06T20:17:38.716537Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "24.03",
"humidity": "58.16",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126580/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126580
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.267days 2023-07-12T13:44:32Z 26C 79F, 48%RH, now: 2024-06-06T20:08:35Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T20:09:28.028591Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "26.12",
"humidity": "47.55",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126579/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126579
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T20:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.2C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T20:05:15.595438Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.25",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126578/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126578
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T19:16:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.7C/45.2%RH, voltage: 5.39",
"created_at": "2024-06-06T19:57:20.210832Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.7",
"humidity": "45.21",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126577/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126577
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T19:46:35.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 27.1C/0%RH, voltage: 5.21",
"created_at": "2024-06-06T19:46:54.630352Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "27.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126576/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126576
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.788days 2023-07-13T00:48:49Z 24C 76F, 58%RH, now: 2024-06-06T19:43:30Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T19:44:10.089911Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.47",
"humidity": "57.81",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126575/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126575
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T19:24:40.000Z, file: _track.qo, location(gps): 45.4974875,-73.69352734, 30.7C/0%RH, voltage: 5.18",
"created_at": "2024-06-06T19:25:04.690095Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4974875",
"longitude": "-73.69352734",
"temperature": "30.66",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126574/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126574
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T19:23:09.000Z, file: _track.qo, location(gps): 45.4981075,-73.69339453, 27.4C/0%RH, voltage: 5.26",
"created_at": "2024-06-06T19:23:26.604341Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981075",
"longitude": "-73.69339453",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126573/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126573
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T19:17:10.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.9C/59.6%RH, voltage: 5.42",
"created_at": "2024-06-06T19:17:28.239892Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.91",
"humidity": "59.59",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126572/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126572
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.225days 2023-07-12T13:44:32Z 26C 79F, 48%RH, now: 2024-06-06T19:08:29Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T19:09:23.426843Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "26.21",
"humidity": "47.62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126571/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126571
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T19:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.4C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T19:05:11.464085Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126570/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126570
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T18:31:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.7C/45.3%RH, voltage: 5.39",
"created_at": "2024-06-06T18:57:12.836994Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.72",
"humidity": "45.34",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126569/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126569
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T18:46:27.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 27.4C/0%RH, voltage: 5.2",
"created_at": "2024-06-06T18:46:48.979725Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "27.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126568/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126568
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.746days 2023-07-13T00:48:49Z 24C 76F, 59%RH, now: 2024-06-06T18:43:30Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T18:44:08.335392Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.29",
"humidity": "59.10",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126567/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126567
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T18:23:03.000Z, file: _track.qo, location(gps): 45.4981075,-73.69339453, 30.7C/0%RH, voltage: 5.18",
"created_at": "2024-06-06T18:23:27.468632Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4981075",
"longitude": "-73.69339453",
"temperature": "30.66",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126566/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126566
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T18:21:25.000Z, file: _track.qo, location(gps): 45.4978475,-73.69326172, 27.4C/0%RH, voltage: 5.26",
"created_at": "2024-06-06T18:21:41.235783Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978475",
"longitude": "-73.69326172",
"temperature": "27.41",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126565/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126565
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T18:17:03.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.7C/60.9%RH, voltage: 5.42",
"created_at": "2024-06-06T18:17:21.695388Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.73",
"humidity": "60.91",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126564/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126564
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.183days 2023-07-12T13:44:32Z 26C 79F, 53%RH, now: 2024-06-06T18:08:24Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T18:09:17.556093Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "26.38",
"humidity": "52.75",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126563/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126563
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T18:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.4C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T18:05:10.484608Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.38",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126562/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126562
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T17:46:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.7C/45.6%RH, voltage: 5.39",
"created_at": "2024-06-06T17:57:13.189473Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.74",
"humidity": "45.64",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126561/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126561
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T17:52:27.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.6C/62%RH, voltage: 5.42",
"created_at": "2024-06-06T17:52:56.409634Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.64",
"humidity": "62",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126560/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126560
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T17:46:21.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 27.2C/0%RH, voltage: 5.21",
"created_at": "2024-06-06T17:46:42.076193Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "27.19",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126559/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126559
},
{
"arduino_name": "NCF_NBGL:x68442 Feather-mp Basement johnedston",
"which_file": "",
"uptime": "uptime: 1689209329 329.705days 2023-07-13T00:48:49Z 24C 75F, 61%RH, now: 2024-06-06T17:43:30Z, USB Status:True, Offset: -1C, 8%RH",
"created_at": "2024-06-06T17:44:07.079841Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.87994003",
"longitude": "-86.08163452",
"temperature": "24.10",
"humidity": "61.41",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126558/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/15/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126558
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T17:29:52.000Z, file: _track.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.3C/45.7%RH, voltage: 5.35",
"created_at": "2024-06-06T17:31:54.797634Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.34",
"humidity": "45.66",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126557/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126557
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T17:01:16.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24.3C/45.9%RH, voltage: 4.25",
"created_at": "2024-06-06T17:31:53.969547Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "24.35",
"humidity": "45.86",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126556/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126556
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T17:29:51.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.35",
"created_at": "2024-06-06T17:31:48.564758Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126555/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126555
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T17:29:49.000Z, file: _health.qo, why: USB power ON {usb-enabled}, location(tower): 45.4947625,-73.69164062, voltage: 5.36",
"created_at": "2024-06-06T17:31:44.479301Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126554/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126554
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T17:29:49.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 25.5C/0%RH, voltage: 5.14",
"created_at": "2024-06-06T17:30:20.039739Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "25.5",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126553/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126553
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T17:29:47.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4978925,-73.69317578, voltage: 5.14",
"created_at": "2024-06-06T17:30:19.510842Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126552/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126552
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T17:29:53.000Z, file: _track.qo, location(gps): 45.4978475,-73.69326172, 25.9C/0%RH, voltage: 5.17",
"created_at": "2024-06-06T17:30:07.263885Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978475",
"longitude": "-73.69326172",
"temperature": "25.92",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126551/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126551
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T17:29:51.000Z, why: USB power ON {usb-enabled}, location(gps): 45.4978475,-73.69326172, voltage: 5.12",
"created_at": "2024-06-06T17:30:06.918717Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978475",
"longitude": "-73.69326172",
"temperature": "",
"humidity": "",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126550/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126550
},
{
"arduino_name": "Ayiti_Blues_21246:DO LiPo no solar no sensor etien",
"which_file": "",
"uptime": "2024-06-06T17:21:17.000Z, file: _track.qo, location(gps): 45.4978475,-73.69326172, 25.7C/0%RH, voltage: 4.2",
"created_at": "2024-06-06T17:21:41.818834Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978475",
"longitude": "-73.69326172",
"temperature": "25.67",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126549/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/27/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126549
},
{
"arduino_name": "NCA_WBNA:x69623:I 10x15SolarLiPo BME280e johnedsto",
"which_file": "",
"uptime": "when: 2024-06-06T17:15:42.000Z, file: _track.qo, where_when: 2024-06-05T02:10:18.000Z, location(gps): 39.8798875,-86.08242578, 23.6C/64.1%RH, voltage: 5.42",
"created_at": "2024-06-06T17:16:00.406953Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.8798875",
"longitude": "-86.08242578",
"temperature": "23.58",
"humidity": "64.12",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126548/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/14/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126548
},
{
"arduino_name": "NCA_WBNA:x77139:I 2W6V 11x18SolarLIC BME280e john",
"which_file": "",
"uptime": "uptime: 1689169472 330.142days 2023-07-12T13:44:32Z 27C 80F, 47%RH, now: 2024-06-06T17:08:19Z, USB Status:True, Offset: 0C, 5%RH",
"created_at": "2024-06-06T17:09:12.285313Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "39.88059616",
"longitude": "-86.08823395",
"temperature": "26.53",
"humidity": "47.29",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126547/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/16/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126547
},
{
"arduino_name": "Ayiti_Blues_11049:F 10x15SolarLIC BME280e etienne",
"which_file": "",
"uptime": "2024-06-06T17:04:43.000Z, file: _track.qo, location(gps): 50.6311875,3.08530859, 19.1C/0%RH, voltage: 4.05",
"created_at": "2024-06-06T17:05:14.220140Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "50.6311875",
"longitude": "3.08530859",
"temperature": "19.12",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126546/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/25/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126546
},
{
"arduino_name": "NCA_WBGLW:x71767 No MCU BME280 johnedstone",
"which_file": "",
"uptime": "when: 2024-06-06T16:16:17.000Z, file: _temp.qo, where_when: , location(tower): 45.4947625,-73.69164062, 24C/46.4%RH, voltage: 4.26",
"created_at": "2024-06-06T16:57:14.246703Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4947625",
"longitude": "-73.69164062",
"temperature": "23.97",
"humidity": "46.36",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126545/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/30/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126545
},
{
"arduino_name": "Ayiti_Blues_22194:M no solar no sensor LiPo etienn",
"which_file": "",
"uptime": "2024-06-06T16:52:11.000Z, file: _track.qo, location(gps): 45.4978925,-73.69317578, 25.3C/0%RH, voltage: 4.25",
"created_at": "2024-06-06T16:52:33.434787Z",
"received_by_notehub": null,
"when_captured_by_device": null,
"best_location_when": null,
"best_location_type": "",
"latitude": "45.4978925",
"longitude": "-73.69317578",
"temperature": "25.31",
"humidity": "0",
"pressure": "",
"url": "http://arduino.johnedstone.net/api/v1/reports/126544/?format=api",
"arduino": "http://arduino.johnedstone.net/api/v1/arduinos/21/?format=api",
"voltage": "",
"t_lat": "",
"t_lon": "",
"t_when": null,
"t_loc": "",
"t_country": "",
"t_id": "",
"t_tz": "",
"gpsfix_time": null,
"id": 126544
}
]
}